Brandt wfb190wa Kurzanleitung
GUIDE TO INSTALLATION AND USE
Washing Machine
1
EN
CONTENTS
Safety instructions................................................................... 2
Installation............................................................................... 5
Operation .............................................................................. 11
Maintenance ......................................................................... 23
Troubleshooting .................................................................... 27
Availability of spare parts ...................................................... 29
2
EN
Safety instructions
• This appliance is designed to be used for domestic
applications only
• The appliance must be connected to the mains water
supply using the brand new connection fittings supplied
with the appliance. Never reuse old fittings.
• Never obstruct the ventilation openings.
• This appliance can be used by children aged 8 years and
over and by individuals with physical, sensory or reduced
mental capacity, or lack of experience and knowledge
under supervision or if they have been given instructions
on how to use the appliance safely and have fully
understood the risks involved. Children must not be
allowed to play with the appliance. Cleaning and
maintenance operations must not be carried out by
children without supervision.
• Children under the age of three should be kept away from
the appliance unless they are under constant supervision.
• If the power cord is damaged, it should be replaced by
the manufacturer, its after-sales service department or a
similarly qualified person, so as to avoid danger.
• Regarding the instructions for installing the appliance and
making its electrical connections, please refer to the
appropriate section in this guide.
• WARNING: Do not connect the appliance to hot water.
• The maximum weight of dry laundry is 9 kilograms.
• Maximum water supply pressure: 1 MPa
• Minimum water supply pressure: 0.05MPa
Warning!
Product installation
• This washing machine is intended for indoor use only.
• It is not designed for built-in installation.
• Never obstruct the openings.
• This washing machine must not be installed in
bathrooms, very damp rooms or in rooms where there
3
EN
are explosive gasses or caustic substances.
• If the washing machine has only one water inlet valve,
connect it to a cold water source only.
• The power plug must remain accessible after the
appliance is installed.
• Remove all packaging materials and the transit bolts
before using the appliance. Failure to do so may
seriously damage your washing machine.
Appliance damage hazard!
• Your appliance is for household (domestic) use only and
is designed solely for machine washable textiles.
• Do not climb on the top of the washing machine.
• Do not lean against the door of the washing machine.
Care when handling the washing machine:
1. The transit bolts must be refitted to the washing machine
by a qualified person.
2. Drain any water from the appliance before moving the
washing machine.
3. Handle the appliance with care. Never lift the appliance
by grabbing projecting parts. The door must not be used
as a handle when moving the appliance.
4. This appliance is heavy. Carry it with care.
• Do not close the door using excessive force. If the door is
hard to close, make sure that the drum is not overloaded
and that the laundry is properly distributed.
• Do not wash carpets.
Operation of the appliance
• Before using the appliance for the first time, perform a
complete wash cycle empty.
• Use of inflammable and explosive solvents is prohibited.
Never use fuel and alcohol, etc. as detergents. Only
choose detergents that are suitable for machine washing.
• Empty the pockets of your clothes. Cutting and rigid
objects like coins, pins, nails, screws, stones, etc. may
seriously damage this appliance.
4
EN
• Check that the water inside the drum has been drained
before opening the door. Do not open the door if you can
still see water inside the washing machine.
• Be careful to avoid injury when draining very hot washing
water.
• Never add water by hand during washing.
• Once the washing cycle has finished, wait two minutes
before opening the door.
5
EN
Installation
Description of the product
1.
Top panel
6.
Drain hose
2.
Control panel
7.
Water supply hose
3.
Power cord
8.
Detergent compartment
4.
Drum
9.
Window
5.
Filter
Note!
•
The illustration of the accessories is provided for
reference purposes only. Please refer to
the actual
product.
6
EN
Accessories
Transit bolt
hole covers
Cold water
supply hose
Drain hose
(optional)
Drain hose
holder (optional)
User guide
Installation location
Warning!
•
It is important that the product be stabilised so that it will
not move!
•
Ensure that the appliance is not resting on the power
cord.
To install your washing machine, choose a location that is:
1. On a hard, dry, flat surface
2. Not exposed to direct sunlight
3. Adequately ventilated
4. In a room at ambient temperature
5. Away from heat sources
The washing machine is designed to operate at
ambient temperature. If it is used in a room where
the temperature is below 0°C, the water inlet
valve and the drainage system may be damaged.
7
EN
Unpacking the washing machine
Warning!
•Packaging materials (e.g. plastic film, polystyrene) can be
hazardous to children.
•
There is a suffocation hazard! Keep all packaging
materials away from children.
1. Remove the cardboard box and the
polystyrene wrapping.
2. Lift the washing machine and
remove the packaging under it.
Don't forget to remove the small
foam triangle at the same time as
the lower packaging. If you cannot
do so, lay the washing machine on
its side and remove the small foam
triangle by hand.
3. Remove the adhesive tape that holds the power cord and
the drain hose in place.
4. Remove the water supply hose from the drum.
Remove the transit bolts
Warning!
•
You need to remove all of the transit bolts located at the
back of the washing machine before using it.
•You'll need the transit bolts again if you move the washing
machine. Keep them in a safe place.
8
EN
Proceed as follows to remove the transit bolts:
1. Use a spanner to loosen the four
transit bolts then pull them out.
2. Push the four transit bolt cover caps
provided for this purpose into the
holes.
3. Keep the transit bolts in a safe place
for future reuse.
Adjusting the levelling feet
Warning!
•The lock nuts on the four levelling feet must be tightened
against the washing machine body.
1. Check that the feet are still firmly attached to the washing
machine. If this is not the case, return them to their
original position and tighten the nuts.
2. Slacken the lock nut and turn the foot until it touches the
floor.
3. Adjust the feet and lock them into position using a
spanner. Check that the washing machine is stable.
Up
Down
Foot lock
nut
9
EN
Connecting the Water Supply Hose
Warning!
•Follow the instructions in this section to avoid water leaks
or water damage.
•Don't twist, squash, modify or cut the water supply hose.
Connecting the water supply hose to a threaded tap
Threaded tap and water supply hose
Connect the other end of the water supply hose to the water
supply valve located on the back of the washing machine then
tighten down the hose by turning it clockwise.
Water supply hose
Inhaltsverzeichnis
Andere Brandt Waschmaschine Handbücher
Brandt
Brandt Washing machine Bedienungsanleitung
Brandt
Brandt WFB104QWA Kurzanleitung
Brandt
Brandt BWF48TCW Bedienungsanleitung
Brandt
Brandt WFB194QWA Kurzanleitung
Brandt
Brandt Washing machine Bedienungsanleitung
Brandt
Brandt WFH1276K Betriebsanleitung
Brandt
Brandt WTC96100 Bedienungsanleitung
Brandt
Brandt WTC0633A Bedienungsanleitung
Brandt
Brandt WFH 1171 U Bedienungsanleitung
Brandt
Brandt WBF1114U Gebrauchsanweisung
Brandt
Brandt wbf1126k Bedienungsanleitung
Brandt
Brandt BWF514I Bedienungsanleitung
Brandt
Brandt BWD8614AG Bedienungsanleitung
Brandt
Brandt BWF612WWE Bedienungsanleitung
Brandt
Brandt WTE1573D Bedienungsanleitung
Brandt
Brandt BT608LA Bedienungsanleitung
Brandt
Brandt WTC1084K Bedienungsanleitung
Brandt
Brandt BFD2302BW Bedienungsanleitung
Brandt
Brandt WTC9670 Bedienungsanleitung
Brandt
Brandt BT1408 Bedienungsanleitung
