Braun Activator 8781 Bedienungsanleitung

Activator 8781 NA KURTZ DESIGN 12.01.05

8781

full

cartridge

empty

clean

eco

normal

intensive

auto select

off

321

8781

empty charge

www.braun.com/register

5-645-300/00/VI-05/G2

USA/CDN/MEX

Printed in Germany

Type/Modéle/Modelo 5645

5645300_S01_NA Seite 1 Montag, 13. Juni 2005 12:00 12

English 4

Français 14

Español 23

Thank you for purchasing a Braun product.

We hope you are completely satisfied with

your new Braun shaver.

If you have any questions, please call:

US residents 1-800-BRAUN-11

1-800-272-8611

Canadian residents 1-800-387-6657

Merci d’avoir fait l’achat d’un produit Braun.

Nous espérons que vous serez pleinement

satisfait de votre nouveau rasoir Braun.

Si vous avez des questions, veuillez appeler

Braun Canada : 1-800-387-6657

Gracias por haber comprado un producto

Braun.

Esperamos que Ud. quede completamente

satisfecho con su nueva afeitadora Braun.

Si Ud. tiene alguna duda, por favor llame al:

01(800) 508-5800

5645300_S02_NA Seite 1 Montag, 13. Juni 2005 12:01 12

321off

8781

charge

empty

start

clea

ning

clean

eco

normal

intensive

full

cartridge

auto select

empty

Activator 8781

Activator

Activator 8781 NA KURTZ DESIGN 12.01.05

5645300_S03_NA Seite 1 Montag, 13. Juni 2005 12:02 12

IMPORTANT SAFETY

INSTRUCTIONS

When using an electrical appliance, basic precautions should always be

followed, including the following:

Read all instructions before using this appliance.

DANGER

To reduce the risk of electric shock:

1. Do not reach for an appliance that has fallen into water.

Unplug immediately.

2. Do not use while bathing or in a shower when the appliance is connected to an

electrical outlet.

3. Do not place, store or charge the appliance where it can fall or be pulled

into a tub or sink. Do not place in or drop into water or other liquid.

4. When not using for a longer period of time, unplug this appliance from the

electrical outlet.

5. Unplug this appliance before cleaning.

6. This appliance is provided with a special cord set with integrated Safety Extra

Low Voltage power supply. Therefore, do not exchange or manipulate any part

of it.

FOR HOUSEHOLD USE

SAVE THESE INSTRUCTIONS

English

5645300_NA_4-34 Seite 4 Montag, 13. Juni 2005 12:16 12

WARNING

To reduce the risk of burns, ﬁre, electric shock, or injury to persons:

1. Close supervision is necessary when this appliance is used by, on, or near

children or invalids.

2. Use this appliance only for its intended use as described in this manual.

Do not use attachments not recommended by the manufacturer.

3. The appliance should never be exposed to temperatures of less than

32 ºF / 0 ºC and more than 105 ºF/+40ºC for longer than a few hours.

Be sure to completely dry appliance after use. Keep cord and adapter dry at

all times. Do not store in a damp environment. To avoid damage do not wind

the cord around the appliance. It is important to check the cord for damage

periodically particularly at each end where the cord enters the plug.

4. Never operate this appliance if it has a damaged cord or plug, if it is not wor-

king properly, if it has been dropped or damaged, or dropped into water.

Return the appliance to a service center for examination and repair.

5. Keep the cord away from heated surfaces.

6. Never drop or insert any object into any opening.

7. Do not use outdoors or operate where aerosol (spray) products are being

used or where oxygen is being administered.

8. Do not use this appliance with a damaged or broken foil, as serious facial

injuries may occur.

9. Always attach plug to appliance ﬁrst, then to outlet.

To disconnect, turn all controls to «off», then remove plug from outlet.

5645300_NA_4-34 Seite 5 Montag, 13. Juni 2005 12:16 12

Your Activator (shaver with Clean&Renew™ station)

is a system equipped with highly advanced electronic

processors. It ensures unsurpassed closeness and

comfort for you and optimum care for your shaver:

• The system automatically adapts to any voltage

worldwide.

• The system recognizes when your shaver requires

cleaning, and automatically determines which of the

three cleaning programs is most appropriate.

• When the shaver is connected to an electrical outlet,

the system automatically recharges the shaver in a

way that optimizes its battery capacity and lifespan.

• The system takes care of lubrication of the shaver’s

cutting parts.

Important

In order to avoid any leakage of the cleaning fluid,

place the Clean&Renew™ station on a flat, stable

surface.

Do not tip, move suddenly or transport the station in

any way if a cleaning cartridge is installed.

Do not place the station in a mirror cabinet, nor store

it over radiators, nor place it on polished or laquered

surfaces. Do not expose to direct sunlight.

The station contains highly flammable liquid. Keep it

away from sources of ignition.

No smoking.

Keep out of reach of children.

Do not refill cartridge.

Use only original Braun refill cartridge.

5645300_NA_4-34 Seite 6 Montag, 13. Juni 2005 12:16 12

Description

1. Special cord set

2. «start cleaning» button

3. Station-to-shaver connecting contacts

4. Station lift button for cartridge exchange

5. Display for cleaning programs

6. Display for cleaning fluid status

7. Station socket

8. Cleaning cartridge

9. Shaver foil protection cap

10. Shaver foil

11. Cutter block

12. Foil release buttons

13. Long hair trimmer

14. Shaver-to-station connecting contacts

(shaver backside)

15. Switch

16. Shaver charging lights (green)

17. Shaver low-charge light (red)

18. Pilot light

19. Shaver socket

Before shaving

If you wish, you may start shaving right away (if the shaver

is charged). However, we recommend to follow the

procedure described here:

• Using the special cord set (1), connect the socket of the

Clean&Renew™ station (7) to an electrical outlet.

• Press the station lift button (4) to open the housing.

• Hold the cleaning cartridge (8) down on a flat, stable

surface (e.g. table).

• Carefully remove the lid from the cartridge.

• Slide the cartridge into the base of the station as far

as it will go.

• Slowly close the housing by pushing it down until it

locks.

eco

normal

intensive

auto s

full

cartridge

empty

clean

eco

normal

intensive

full

cartridge

auto select

empty

clean

eco

normal

intensive

full

cartridge

auto select

empty

clean

eco

normal

intensive

full

cartridge

auto select

empty

5645300_NA_4-34 Seite 7 Montag, 13. Juni 2005 12:16 12

The display for cleaning fluid (6) will show how much

cleaning fluid is in the cartridge:

a) Cleaning solution sufficiently available

b) Up to 7 cleanings left

c) New cartridge required

Make sure the foil protection cap (9) is removed from the

shaver. Insert the shaver head down into the station (the

contacts on the back of the shaver (14) will correspond to

the contacts in the station (3)). If necessary, the system

will now charge the shaver.

Also, the cleaning status will be automatically analyzed

and one of the four diodes of the cleaning program display

(5) will light up:

a) The shaver is clean

b) Eco(nomic), i.e. short cleaning required

c) Normal cleaning required

d) Intensive cleaning required

If the system has selected one of the three cleaning

programs, it will not start until you push down the «start

cleaning» button (2). This locks the shaver into the station

and starts the cleaning process.

We recommend cleaning after each shave.

While cleaning is in progress, the respective cleaning

program light will flash. Each cleaning consists of several

cycles (where the cleaning fluid is flushed through the

shaver head) and a heat drying period. The total cleaning

time is 33 to 50 minutes.

Cleaning processes in the Clean&Renew™ should not

be interrupted. While the shaver is drying, the metal

parts of the shaver may be hot. Also, if the shaver is

taken out prematurely and is not dry, its electronics

could be harmed.

When the program is finished, the blue «clean» light will

shine. You can release the shaver by pushing the «start

cleaning» button.

Your shaver is now clean and ready for use.

cartridge

full

empty

cartridge

full

empty

cartridge

full

empty

abc

full

cartridge

auto select

empty

eco

normal

intensive

clean

321off

auto select

eco

normal

intensive

clean

full

cartridge

auto select

empty

eco

normal

intensive

clean

321off

empty

8781

charge

auto select

eco

normal

intensive

clean

auto select

eco

normal

intensive

clean

5645300_NA_4-34 Seite 8 Montag, 13. Juni 2005 12:16 12

Shaving

If the shaver is locked into the Clean&Renew™ station,

push the «start cleaning» button (2) to release the shaver

and take it out.

Switch positions

0 = Off (switch is locked)

Press and push up the switch to operate the shaver:

1 = Shaving with the pivoting head

(the pivoting cutting system automatically adjusts to

every contour of your face).

2 = Shaving with the pivoting head locked at an angle

(to permit shaving in difficult areas, e.g. under the

nose).

3 = The long hair trimmer is activated

(for trimming sideburns, moustache and beard).

Shaving with the cord

If the shaver is completely discharged and you do not

have the time to recharge in the Clean&Renew™ station,

you may also shave with the shaver connected to an

electrical outlet via the special cord set.

After shaving

Automatic cleaning

After each shave, return the shaver to the Clean&Renew™

station and proceed as described above in the section

«Before shaving». All charging and cleaning needs are

then taken care of. With daily use, a cleaning cartridge

should be sufficient for about 30 cleaning cycles.

The hygienic cleaning solution cartridge contains alcohol

which, once opened, will naturally evaporate slowly into

the surrounding air. Each cartridge, if not used daily,

should be replaced after approximately 8 weeks.

Tips for the perfect shave

• Shave before washing your face or taking a shower,

as skin tends swell after washing.

• The dryer the skin, the closer the shaving results will

be.

• Hold the shaver at right angles (90°) to the skin.

Stretch your skin and shave against the direction of

beard growth.

• To maintain 100% shaving performance, replace

your foil and cutter block at least every 18 months or

when worn.

321

8781

full

cartridge

auto select

empty

eco

normal

intensive

clean

321off

empty

8781

charge

5645300_NA_4-34 Seite 9 Montag, 13. Juni 2005 12:16 12

Quick cleaning

Press the foil release buttons (12) to lift the shaver foil

(do not remove the foil completely). Switch on the shaver

for approx. 5–10 seconds so that the shaved stubbles can

fall out.

Thorough manual cleaning

Manual cleaning is recommended only when the

Clean&Renew™ station is not available, e.g. when travel-

ling. Never use water to clean the shaver.

Remove the shaver foil and tap it out on a flat surface.

Using the brush, clean the cutter block and the inner area

of the pivoting head. If you do not use the Clean&Renew™

station for a longer period of time, you should apply a drop

of light machine oil onto the shaver foil.

Replacing the cartridge

After having pressed the lift button (4) to open the

housing, wait for a few seconds before removing the used

cartridge.

Before discarding the used cartridge, make sure to close

the openings using the lid of the new cartridge, since

the used cartridge will contain contaminated cleaning

solution.

Cleaning shaver and Clean&Renew™ housing

Clean the housing of shaver and Clean&Renew™ station

from time to time using a damp cloth, paying special

attention to the opening of the station where the shaver

rests.

The shaver indicator lights

Pilot light (18): the shaver is connected to an electrical

outlet.

The red low-charge light (17) flashes when the battery

capacity has dropped below 20%, provided the shaver is

switched on. The remaining capacity will then be sufficient

for 2 to 3 shaves.

21off

1off

old

new

8781

empty cha

empty ch

8781

5645300_NA_4-34 Seite 10 Montag, 13. Juni 2005 12:16 12

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Braun Elektrorasierer Handbücher

Braun

Braun CRUZER 5730 Bedienungsanleitung

Braun

Braun cruzer 5 Bedienungsanleitung

Braun

Braun 390CC-4 Kurzanleitung

Braun

Braun 3040s Bedienungsanleitung

Braun

Braun BT 7050 Bedienungsanleitung

Braun

Braun SmartControl 199s-1 Bedienungsanleitung

Braun

Braun Flex XPII Bedienungsanleitung

Braun

Braun 310 wet&dry Bedienungsanleitung

Braun

Braun FlexIntegral 5414 Bedienungsanleitung

Braun

Braun Series 3 Bedienungsanleitung

Braun

Braun 3105 Bedienungsanleitung

Braun

Braun SERIES 3 340S-4 Bedienungsanleitung

Braun

Braun MobileShave M-90 Bedienungsanleitung

Braun

Braun Silk&Soft LS 5560 Bedienungsanleitung

Braun

Braun KF 150 Bedienungsanleitung

Braun

Braun Series 3 Bedienungsanleitung

Braun

Braun Cruzer 2675 Bedienungsanleitung

Braun

Braun EN 10 Series Bedienungsanleitung

Braun

Braun PocketGo 550 Bedienungsanleitung

Braun

Braun ExactPower EP 80 Bedienungsanleitung

Braun

Braun 9359PS Bedienungsanleitung

Braun

Braun FreeControl 1775 Bedienungsanleitung

Braun

Braun 750cc-7 Bedienungsanleitung

Braun

Braun BS 8795 Bedienungsanleitung

Beliebte Elektrorasierer Handbücher anderer Marken

Philips

Philips MicroAction 4402LC Bedienungsanleitung

Philips

Philips HQ7740 Bedienungsanleitung

Philips

Philips Norelco BG2022 Bodygroom Bedienungsanleitung

Norelco

Norelco Quadra 7610X Bedienungsanleitung

Philips

Philips 7616X Bedienungsanleitung

Philips

Philips HQ802 Bedienungsanleitung

Philips

Philips HQ7363/17 Bedienungsanleitung

Philips

Philips NORELCO S7371 Bedienungsanleitung

Daga

Daga MT-400 Handbuch

Remington

Remington BHT100 Bedienungsanleitung

Philips

Philips Bodygroom BG2000 Bedienungsanleitung

Kompernass

Kompernass KH 5537 Bedienungsanleitung

Remington

Remington BHT6100 Bedienungsanleitung

Philips

Philips qc5365 Bedienungsanleitung

MIA

MIA Aqua Body Bedienungsanleitung

Philips

Philips NORELCO AT880 Bedienungsanleitung

Matheo

Matheo MLR 15 Bedienungsanleitung

Remington

Remington XR7000 Bedienungsanleitung