Bresser TemeoTrend FSX Bedienungsanleitung
Weather Station ·
TemeoTrend FSX
EN Instruction manual
DE
Besuchen Sie unsere Website über den folgenden QR Code oder Weblink um weitere Informationen
zu diesem Produkt oder die verfügbaren Übersetzungen dieser Anleitung zu finden.
EN
Visit our website via the following QR Code or web link to find further information on this product or
the available translations of these instructions.
FR
Si vous souhaitez obtenir plus d’informations concernant ce produit ou rechercher ce mode
d’emploi en d’autres langues, rendez-vous sur notre site Internet en utilisant le code QR ou le lien
correspondant.
NL
Bezoek onze internetpagina via de volgende QR-code of weblink, voor meer informatie over dit
product of de beschikbare vertalingen van deze gebruiksaanwijzing.
ES
¿Desearíarecibirunasinstruccionesdeusocompletassobreesteproductoenunidiomadeterminado?
Entonces visite nuestra página web utilizando el siguiente enlace (código QR) para ver las versioneAs
disponibles.
IT
Desidera ricevere informazioni esaustive su questo prodotto in una lingua specifica? Venga a
visitare il nostro sito Web al seguente link (codice QR Code) per conoscere le versioni disponibili.
www.bresser.de/P7060200
www.bresser.de/warranty_terms
GARANTIE · WARRANTY · GARANTÍA · GARANZIA
3
Contents
1 Imprint .............................................................................................................................................................4
2 Validity information ........................................................................................................................................4
3 About this Instruction Manual.......................................................................................................................4
4 Parts overview and scope of delivery ..........................................................................................................5
5 Screen display ................................................................................................................................................7
6 Before starting operation...............................................................................................................................8
7 Setting up power supply................................................................................................................................8
8 Battery level indicator ....................................................................................................................................9
9 Automatic time setting...................................................................................................................................9
10 Manual time setting and other user defined settings .................................................................................9
11 Alarm settings.................................................................................................................................................9
12 Snooze function............................................................................................................................................10
13 Receiving measurements automatically ....................................................................................................10
14 Moon phases.................................................................................................................................................10
15 Weather Trend ..............................................................................................................................................11
16 Trend arrow indicators.................................................................................................................................12
17 Barometric / Atmospheric Pressure ...........................................................................................................12
18 Connecting remote sensors ........................................................................................................................13
19 Temperature display ....................................................................................................................................13
20 History record for the past 24 hours ..........................................................................................................13
21 MAX/MIN Weather data ................................................................................................................................13
22 Technical data...............................................................................................................................................14
23 EC Declaration of Conformity .....................................................................................................................14
24 Disposal.........................................................................................................................................................14
4 / 16
1 Imprint
Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany
http://www.bresser.de
If you wish to submit a warranty claim or service request, please refer to the “Warranty” and “Service”
information in this document. Please be aware that any requests or submissions sent directly to the
manufacturer cannot be processed.
Errors excepted. Subject to technical modifications.
© 2019 Bresser GmbH
All rights reserved.
Reproduction of this document, including extracts, in any form (photocopied, printed etc.) or the use
and distribution of this document by electronic means (image file, website etc.) is not permitted without
the prior written consent of the manufacturer.
The terms and brand names of the respective companies used in this document are protected by
brand, patent or product law in Germany, the European Union and/or other countries.
2 Validity information
This documentation is valid for the products with the article numbers listed below:
7060200
Manual version: 05/19
Manual description:
Manual_7060200_TemeoTrend-FSX_en_BRESSER_v052019a
With any service inquiries, please state these information.
3 About this Instruction Manual
NOTICE
These operating instructions are to be considered a component of the device.
Please read the safety instructions and the operating instructions carefully before use.
Keep these instructions for renewed use at a later date. When the device is sold or given to someone
else, the instruction manual must be provided to the new owner/user of the product.
5 / 16
4 Parts overview and scope of delivery
BARO
CH
12/24
2
1
3
4
5
6
7
8
9
10
11
3
14
15
16
12
13
19
18
17
22
21
24
23
20
A
B
Illustration1: Parts overview for base station (top) and remote sensor (bottom)
1 Display 2 Housing
3 SNOOZE/LIGHT button (snooze function and
temporary background lighting)
4 HISTORY button (retrieve measurements for
the past 24 hours)
5 CH/UP button (sensor channel selection or
value change upwards)
6 12/24/DOWN button (time mode selection or
value change downwards)
7 MAX/MIN button (switch between highest, low-
est or current value display)
8 BARO button (display of different atmospheric
pressure values)
9 TIME button (manual time setting) 10 ALARM button (Alarm setting)
11 Wall mount fixture 12 °C/°F button (temperature format setting)
13 RESET button (reset all settings) 14 Stand, fold-out
15 Battery compartment cover 16 Battery compartment
17 Display 18 Function indicator (data transmission)
6 / 16
19 Housing 20 Battery compartment
21 RESET button (reset all settings) 22 Wall mount fixture
23 Channel switch 24 Battery compartment cover
Scope of delivery
Base station (A), remote sensor (B)
Also required (not included):
4 pcs. Mignon batteries (1.5V, AA type)
7 / 16
5 Screen display
1
256
3
4
8
10
9
11
12
7
13
14
21
22
20
17
18
19
16
15
Illustration2: Display of the base unit
1 AM/PM information in 12-hour time mode 2 Current time (hours:minutes:seconds)
3 Alarm symbol (alarm 1 or 2 enabled) 4 Symbol for active daylight saving time
(DST)
5 Date (month-day or reverse) 6 Weekday
7 Transmission symbol (radio-controlled
clock CET)
8 Alarm (AL1 or AL2)
9 Air pressure (mb/hPa or inHg) 10 Moon phase
11 Bar chart for air pressure history 12 Weather trend (72 hours)
8 / 16
13 Humidity outdoors 14 Humidity indoors
15 Battery status 16 Temperature (indoor)
17 Temperature (outdoor) 18 Channel info (sensors)
19 Sensor signal status 20 Weather trend (48 hours)
21 Weather trend (24 hours) 22 Singles values for air pressure history (up
to 24 hours)
6 Before starting operation
NOTICE
Avoid connectivity disruptions!
To avoid connectivity disruptions between the devices, consider the following points before starting
operation.
1. Place base station (receiver) and remote sensor (sender) together as close as possible.
2. Set up power supply for the base station and wait until the indoor temperature is displayed.
3. Set up power supply for the remote sensor.
4. Position the base station and the remote sensor within the effective transmission range.
5. Ensure that the base station and remote sensor are assigned to the same channel.
When changing batteries always change batteries in the main unit as well as all remote units and re-
place them in the correct order, so the remote connection can be re-established. If either of the
devices is mains-powered, the power supply must be disconnected for a short moment also for this
device when exchanging the batteries. If batteries are exchanged in only one of the devices (i.e. the
remote sensor) the signal can’t be received or can’t be received correctly.
Note, that the effective range is vastly affected by building materials and position of the main and re-
mote units. Due to external influences (various RC devices and other sources of interference), the
maximum distance can be greatly reduced. In such cases we suggest to position the main unit and the
remote sensor at other places. Sometimes all it takes is a relocation of one of these components of a
few inches!
Though the remote unit is weather proof, it should be placed away from direct sunlight, rain or snow.
7 Setting up power supply
Base unit
1. Remove the battery compartment cover.
2. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
3. Replace the battery compartment cover.
4. Wait until the indoor temperature is displayed on the base station.
Remote sensor
5. Remove the battery compartment cover.
6. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
7. Move the CH slide control to the position for the desired transmission channel (setting CH1, CH2
or CH3 with screen display).
8. Replace the battery compartment cover.
NOTICE!When operating one outdoor sensor, channel 1 is recommended as the default setting.
9 / 16
8 Battery level indicator
1. When the batteries in the base station or in the remote sensor reach the low charge level, the cor-
responding battery level indicator appears on the display.
2. When replacing a set of batteries, always also remove the batteries from the other part of the
device and reinsert the batteries in the intended order (see chapter "Setting up power supply").
Replace the batteries in the relevant part of the device with a completely new set with full capacity.
This ensures that the connection between the devices is reestablished correctly.
9 Automatic time setting
After the power supply was established, the clock will automatically search for the radio signal. This
will take approximately 3 to 8 minutes to finish this process.
If the radio signal is received correctly, the date and time will be set automatically and the radio control
signal icon turns on.
If the clock fails to receive the time signal, go ahead with the following steps:
1. Press °C/°F button on the base station for approx. 3 seconds to initate RC signal reception again.
2. If the device is still not receiving the signal, the time must be set manually.
Read the detailed manual for more information about manual time and alarm setting (see download in-
formation on page 2).
10 Manual time setting and other user defined
settings
1. In normal display mode, press MODE/SET button for approx. 3 seconds to switch to settings
mode.
2. Digits to be set are flashing.
3. Press DOWN/RAIN HISTORY button or UP/RCC/ALARM button to change the value.
4. Press the MODE/SET button to confirm the setting and move to the next setting.
5. Settings order: 12/24 hours mode > RCC on/off > time zone (-12 to +12 hours) > hours > minutes
> seconds > year > month > day > language > temperature unit > barometric pressure unit > wind
speed unit > precipitation unit > wind direction
6. Finally press MODE/SET button to save the settings and exit settings mode.
11 Alarm settings
1. In normal display mode, press the TIME button several times to display the Alarm time AL1 or
AL2.
2. Press ALARM button for approx. 3 seconds to enter the alarm time setting mode.
3. Digits to be set are flashing.
4. Press CH/UP or 12/24/DOWN button to change the value.
5. Press ALARM button to confirm and continue to the next setting.
6. Settings order: hours > minutes > ice alert on/off
NOTICE!If ice alert is enabled (on), the alarm will sound 30 seconds before the set alarm time if
the temperature is -3° or below.
7. Finally press the ALARM button to save the settings and exit the setting mode. Alarm will be activ-
ated automatically. The symbol will be displayed.
8. In normal display mode, press the ALARM button several times to enable alarm time AL1, AL2 or
both. If the alarm is enabled, the corresponding symbol will be displayed ( 1, 2 or 1 2).
10 / 16
12 Snooze function
1. When the alarm sounds press the SNOOZE/LIGHT button to activate the snooze function. The
alarm will sound again in 5 minutes.
2. Press ALARM button when the alarm sounds to interrupt the alarm until the alarm time will be
reached again.
3. The alarm will be turned off automatically if no button is pressed within 2 minutes.
13 Receiving measurements automatically
Once the power supply is enabled, the base station will display the measurement readings. Readings
from the remote sensor will be displayed within 3 minutes after powering it on.
If no signal is received, go ahead with the following steps:
Press °C/°F button for approx. 3 seconds to initate reception of measurements again.
Read the detailed manual for more information about readings (see download information on page 2).
14 Moon phases
This weather station is able to display the moon phases for the northern hemisphere. Here the moon
grows from the right. This is because the sunlit side of the moon in the northern hemisphere moves
from right to left. The following table shows the representations of the moon phases.
Andere Handbücher für TemeoTrend FSX
1
Inhaltsverzeichnis
Andere Bresser Wetterstation Handbücher
Bresser
Bresser 4Cast PRO SF Bedienungsanleitung
Bresser
Bresser WIFI ClearView Weather Station 7in1 Bedienungsanleitung
Bresser
Bresser 7002585 Bedienungsanleitung
Bresser
Bresser Meteo Temp HZ Bedienungsanleitung
Bresser
Bresser 7002531 Bedienungsanleitung
Bresser
Bresser Translucidus Bedienungsanleitung
Bresser
Bresser MeteoTemp Proj 7004405 Bedienungsanleitung
Bresser
Bresser TemeoTrend STX Bedienungsanleitung
Bresser
Bresser 4Cast 95-01100 Bedienungsanleitung
Bresser
Bresser Thermo Hygro Quadro NLX Bedienungsanleitung
Bresser
Bresser ClimaTemp XXL + Multisensor-Set Bedienungsanleitung
Bresser
Bresser TemeoTrend WFS Bedienungsanleitung
Bresser
Bresser National Geographic VA Bedienungsanleitung
Bresser
Bresser TemeoTrend P Bedienungsanleitung
Bresser
Bresser Temeo MC Bedienungsanleitung
Bresser
Bresser Temeo Hygro Quadro Bedienungsanleitung
Bresser
Bresser 7003800 Bedienungsanleitung
Bresser
Bresser TemeoTrend LGX Bedienungsanleitung
Bresser
Bresser P7002560 Bedienungsanleitung
Bresser
Bresser 4Cast PRO 7003210 Bedienungsanleitung
Beliebte Wetterstation Handbücher anderer Marken
National Geographic
National Geographic VA Colour RC Bedienungsanleitung
Renkforce
Renkforce 1208067 Bedienungsanleitung
Levenhuk
Levenhuk Discovery Report WA40 Bedienungsanleitung
Instant Transmission
Instant Transmission MA 10410 Bedienungsanleitung
Lutron Electronics
Lutron Electronics PHB-318 Bedienungsanleitung
WAREMA
WAREMA EWFS Weather station eco Bedienungsanleitung