Breville Power Steam VIN247 Bedienungsanleitung

product safety

Please read these instructions before operating the appliance and retain them for

future use.

!This product is not suitable for use by children, and may not be suitable for persons

requiring supervision unless they receive instruction by a competent person on how to

safely use the product. Children should be supervised to ensure that they do not play

with the product.

!Never use this appliance for anything other than its intended use. This appliance is for

household use only. Do not use this appliance outdoors.

!Always ensure that hands are dry before handling the plug or switching on the

appliance.

!Never leave the appliance unattended when it is connected to the mains supply.

!Ensure the appliance is switched off and unplugged from the supply socket before

lling or emptying the water tank, after use and before cleaning.

!Do not use the appliance if it has been dropped, if there are any visible signs of

damage or if it is leaking.

!Always use the appliance on a stable, secure, dry and level surface. When placing the

appliance on its stand, ensure that the surface on which the stand is placed is stable.

!Do not touch the metal parts of the appliance during use as they may become very hot.

!Never operate the appliance by means of an external timer or separate remote-control

system.

!This appliance must not be placed on or near any potentially hot surfaces (such as a

gas or electric hob).

!The power cord is not replaceable by the user. Always return the appliance if the power

cord is damaged to avoid any hazard.

!Always allow the appliance to cool before cleaning or storing.

!Never immerse any part of the appliance or power cord and plug in water or any other

liquid.

!Never let the power cord hang over the edge of a worktop, touch hot surfaces or

become knotted, trapped or pinched.

features

Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.

1. Water tank inlet cover

2. Steam control

3. Shot of steam button

4. Spray button

5. Temperature indicator light

6. Power indicator light

7. Flexible cord protector

8. Heel rest

9. Cord wrap

10. Temperature control dial with pointer

11. Stainless steel soleplate

12. Self-clean button

13. Water level maximum indicator

14. Water tank

15. Spray nozzle

q wer

asf

before first use

Remove all packaging including any soleplate protection before using your iron.

Wipe over the soleplate with a cloth moistened with methylated spirit. Wipe off the

methylated spirit with a damp cloth then dry the soleplate thoroughly.

Fill the water tank and then empty it. This will rinse out any foreign particles remaining in

the water tank from the manufacturing process. Never ll your iron by holding it directly

under a tap, always use a jug.

Before connecting your iron to the mains supply, make sure your supply voltage is the

same as the one indicated on your iron.

When you rst use your iron, there may be a slight odour and it may smoke slightly for the

rst few minutes of operation. This is quite normal and will disappear.

filling your iron

Never add fabric conditioner, starches or any other chemicals to the water in

your iron.

1. Ensure your iron is switched off and unplugged from the mains supply socket.

2. Set the steam control to the no steam position (0).

3. Open the water tank inlet cover.

4. Fill the water tank with ordinary tap water. To avoid air locks, tilt your iron slightly

while lling it.

5. Don’t ll the iron above the water level indicator MAX marking. Check the water level

by standing the iron on its heel.

6. When the iron is lled close the water tank inlet cover.

using your iron

We recommend that you:

• Start by ironing those items of laundry that require the lowest temperature (e.g.

synthetics). Finish by ironing fabrics which respond best to higher temperatures and

steam—such as cotton and linen.

• If you iron a fabric made of a blend of bres set the temperature of your iron to the

most delicate bre.

• Never use the burst of steam button on silks or synthetics.

• When using starch, it should be sprayed onto the reverse side of the fabric and the

soleplate cleaned more frequently.

• Do not iron over sharp or hard objects such as buttons, studs or zippers as they will

scratch the soleplate of your iron.

Important

Your iron takes time to heat up and cool down. If you change the temperature setting on

your iron, you must give it time to adjust to the new setting.

This is especially important when you change from a high setting to a lower one. It

takes your iron longer to cool down than it does to heat up and this is the reason we

recommend that you begin ironing at lower temperatures.

If you do need to reduce the temperature of your iron, wait until the temperature indicator

light goes out and then comes on again before ironing. This will ensure that your iron has

reached the lower temperature and is not too hot for the fabric being ironed.

For example, you have been ironing using the lll setting and want to change to the ll

setting:

1. Move the temperature control dial to the ll setting. Initially, the temperature indicator

light will be lit because your iron is still at a higher temperature.

2. Wait until the temperature indicator light goes out and then comes on again. Your iron

has now cooled to the correct temperature.

using your iron

Ironing without steam

If you intend to dry-iron fabrics there is no need to ll the water tank. However, if water is

already in the water tank, you don’t need to empty it.

1. Set the steam control to the no steam position (0).

2. Plug your iron into the mains supply and switch on.

3. Rotate the temperature control dial until the desired setting is aligned with the dial

pointer.

4. When the temperature indicator light comes on, your iron is ready to use.

Steam ironing

During steam ironing, if you do not allow your iron to reach the selected

temperature water may drip from the soleplate.

It is recommended that for harder to iron fabrics such as cotton and linen, steam should

be used when ironing.

When ironing cotton and linen, always select the highest temperature. Steam should

never be used on delicate fabrics like nylons, acrylics and synthetics.

1. Fill your iron with water.

2. Plug your iron into the mains supply and switch on.

3. Set the temperature control dial to the lll setting. The hotter your iron, the more

steam is generated.

4. When the temperature indicator light comes on your iron is ready to use. The

temperature indicator light will turn on and off during ironing as your iron maintains

the correct temperature.

5. Adjust the steam control lever to select the desired steam output.

6. Move the steam control lever to the high steam ( ) setting to increase the amount of

steam, or towards the off (0) setting to decrease the amount of steam.

7. The steam can be shut off at any time by setting the steam control to the off (0)

position.

Burst of steam

The temperature control dial must be set within the ll and lll setting. Wait several

seconds between each press of the steam button.

Press the shot of steam button whenever you have a stubborn crease that needs extra

steam. Steam will burst from the holes in the soleplate of your iron into the fabric.

Vertical steam ironing

Never iron garments when they are being worn.

Your iron can be used for vertical steam ironing curtains, dresses on hangers etc.

1. Fill your iron with water.

2. Plug your iron into the mains supply and switch on.

3. Set the temperature control dial to the lll setting. The hotter your iron, the more

steam is generated.

4. When the temperature indicator light comes on, your iron is ready to use.

5. Hold your iron 15cm (6 inches) from the fabric.

6. Press the shot of steam button. The steam will penetrate the fabric removing the

creases. To apply more steam press the shot of steam button again. Wait several

seconds between each press of the button.

Spraying

The spray function will only operate when there is water in the water tank.

1. The water spray can be used to help iron heavy fabrics or difcult areas (collars,

pockets, sleeves, creases, etc). It can also be used when ironing delicate fabrics

which cannot be steam ironed.

2. Simply press the button as required to produce a spray of water. If the spray is being

used for the rst time, or if the iron has been standing for some time, you may need

to press the spray button a few times before it works correctly.

Anti-drip feature

When the temperature of your iron is insufcient to create steam, the supply of water is

cut off automatically to avoid any drips from the soleplate.

Anti-scale lter

Your iron is tted with a permanent anti-scale lter. This lter is xed and cannot be

removed for cleaning.

The lter is designed to reduce the build-up of limescale inside your iron. Limescale

occurs during steam ironing due to water hardness.

Water hardness varies from one area to another. The effectiveness of the lter will

depend on how ‘hard’ your water is.

using your iron

Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior

of your iron because they will damage the surface.

Cleaning the soleplate of your Iron

After each use, allow your iron to completely cool down before wiping the soleplate with

a soft damp cloth. If polyester has burnt to the soleplate, iron a damp cotton cloth while

your iron is still hot. If necessary, allow your iron to completely cool down then wipe over

the soleplate with a soft cloth moistened with methylated spirits. Wipe off the methylated

spirits with a damp cloth then dry the soleplate.

Self-cleaning

Only press the self-clean button when you want to activate the self cleaning

system. Never press the self-clean button when ironing.

The self-clean function removes scale and impurities. Use the self-clean function once

every two weeks. If the water in your area is very hard, the self clean function should be

used more frequently.

1. Ensure your iron is switched off and unplugged from the mains supply socket.

2. Set the steam control to the no steam (0) position.

3. Fill your iron with water to the MAX level.

4. Stand your iron on its heel rest, plug in and switch on at the mains supply.

5. Set the temperature control dial to the highest (MAX) setting. Allow your iron to heat

up until the temperature indicator light comes on.

6. Unplug your iron and hold it over a sink with the soleplate facing downwards.

7. Press and hold the self-clean button. Hot water and steam will be ejected from the

holes in the soleplate along with any impurities.

8. Release the self-clean button after one minute or when the water tank is empty.

9. Stand your iron on its heel rest, plug it in to the mains supply socket and switch on.

When the temperature indicator light comes on, iron an old piece of cloth to allow any

remaining water to escape.

10. After use, switch off and unplug your iron from the mains supply and allow it to fully

cool. Empty out any remaining water.

care and cleaning

Cleaning the steam holes

To remove any build-up in or around the steam holes which may affect steam

performance, use a cotton wool tip moistened with methylated spirits. Wipe off the

methylated spirits with a damp cloth then dry the soleplate.

Cleaning the exterior of your Iron

To clean the exterior of your iron, wipe it with a soft damp cloth and wipe dry.

care and cleaning

Inhaltsverzeichnis

Andere Breville Eisen Handbücher

Breville

Breville VIN359 Bedienungsanleitung

Breville

Breville DiamondXpress VIN420X Bedienungsanleitung

Breville

Breville PressXpress soleTEMP VIN411 Series Bedienungsanleitung

Breville

Breville Power Steam VIN299 Bedienungsanleitung

Breville

Breville PressXpress VIN410X Bedienungsanleitung

Breville

Breville Easy Glide Bedienungsanleitung

Breville

Breville Power Steam VIN349 Bedienungsanleitung

Breville

Breville Power Steam VIN177 Bedienungsanleitung

Breville

Breville SuperSteam VIN412 Bedienungsanleitung

Breville

Breville PressXpress soleTEMP VIN411X Bedienungsanleitung

Breville

Breville POWERsteam Advanced Bedienungsanleitung

Breville

Breville VIN281 Bedienungsanleitung

Breville

Breville PressXpress 3100W Bedienungsanleitung

Breville

Breville VIN439 Bedienungsanleitung

Breville

Breville vin276 Bedienungsanleitung

Breville

Breville vin276 Bedienungsanleitung

Breville

Breville Power Steam VIN253 Bedienungsanleitung

Breville

Breville VIN301X Bedienungsanleitung

Breville

Breville BIR300 Bedienungsanleitung

Breville

Breville Technique Bedienungsanleitung

Breville

Breville Easy glide 2200W Bedienungsanleitung

Breville

Breville VIN169 Fehlerbehebungshandbuch

Breville

Breville VSG002X Bedienungsanleitung

Breville

Breville Power Steam VIN352 Bedienungsanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Philips

Philips GC651 Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

Philips

Philips GC800 Bedienungsanleitung

dyras

dyras ESI-2400AC Bedienungsanleitung

Philips

Philips PerfectCare PSG71 Series Bedienungsanleitung

GE 169061 Bedienungsanleitung