Brickhouse Security LiveWire VOLT Bedienungsanleitung
LiveWire VOLT
User’s Guide
What’s Inside
1.
LiveWire VOLT device
2.
Double-Sided Tape
3.
Quick Start Guide
1.
LED
(Power/GPS indicator)
2.
Black Wire
a.
(-) Negative
b.
Connect to Ground
3.
Red Wire
a.
(+) Positive
b.
Connect to DC 8-32 V
4.
Screw Mounts
(optional)
We recommend the enclosed double-sided tape to mount the unit.
Many cars do not have ports for the screw mounts near the battery.
LED
The red LED indicates multiple statuses.
1.
Fast Flash: cablesare connected, device is powered, device is
searching for the a cellular connection.
2.
Solid Red: powered, connected. The device has a GPS fix (successful
connection). The light will remain on during normal device operation.
3.
Slow Flash: a slow steady red blink will indicate a problem getting a
GPS fix. Poor weather, parking garages, and large buildings can all
affect the connection. If possible, retry setup in a different location.
4.
No Light: the device is not connected correctly and is not functioning.
Please double check that the wires are connected to the correct battery
terminals. Red wire is the positive and black wire is for negative.
Getting Started
You will have received an email containing your default login information; use
this to connect to the platform, configure your device,and view tracking
information (see details later in this manual).
The first step in using your GPS device is to connect the positive and
negative wires to the battery terminals. Then, gently peel and apply the
included adhesive sticker to the back of the device. Mount the device flat,
face up, with the label's arrow pointing toward the front of the vehicle. Make
sure both cables are securely in place before use.
Proper mounting is important! Since the device is motion-activated, insecure
mounting will lead to unreliable readings.
In order for the device to transmit its first location reading, it must be mounted
securely and the vehicle must be moving. Take a quick test drive right after
successful installation!
Customizing and Tracking Your Device Via a Web Browser
_______________________________________________
To start tracking, open a browser window and go to www.BrickhouseSecurity.com.
Hover your cursor over "Login"at the top right of thewebsite,click on GPS. This will
take you to the Login Page, where you will log into the Locate GPS platform using
the credentials that were provided via email
Upon first visit, you will be prompted to change your password. After your
password has been changed, the Monitoring page will appear and your device's
last reported location will be centered on the map.
You can also login directly to the platform by visiting locate.brickhousesecurity.com
User Settings
___________
In order to change settings, click on your
username in the right corner of the top panel.
You will find the ‘User Settings’ option in the
dropdown menu.
It is important to configure these options:
•Indicate your time zone.
•SetDaylight Savings Time, if applicable.
•Preferred Date and Time formats.
•Preferred Start of Week.
Note:Please make sure your time settings are accurate to your location,
as they influence the readability ofdata presented inreports, messages,
and elsewhere throughout the system.
User SettingsInterface
___________________
Enable Unit Visibility
_________________
Before editing a unit, make sure that your devicesare being displayed on the
Monitoring tab as well as on the Map. To enable this visibility, please follow
the steps below:
Next, check boxes next to your units. If
you have multiple units, you can click the
top box to select all. Unchecked units
are not visible on map.
First, click on the 'All' button as
shown below.
Edit Unit Name and Icon
____________________
You can edit the unit properties
(including name and icon) by
clicking on the wrench to the right
of the unit.
To change the name, type it into the
area shown below and click OK.
From this same menu, clicking on the Icon
tab to update the look of your vehicle.
Inhaltsverzeichnis
Andere Brickhouse Security GPS Handbücher
Brickhouse Security
Brickhouse Security Spark Nano 6 Bedienungsanleitung
Brickhouse Security
Brickhouse Security Livewire Bedienungsanleitung
Brickhouse Security
Brickhouse Security Eon 3.0 Bedienungsanleitung
Brickhouse Security
Brickhouse Security Spark Nano 6.0 Bedienungsanleitung
Brickhouse Security
Brickhouse Security EON4 Bedienungsanleitung
Brickhouse Security
Brickhouse Security Trackport 4 Bedienungsanleitung
Brickhouse Security
Brickhouse Security Livewire 4 Bedienungsanleitung
