Brookstone iConvert Bedienungsanleitung
771237_INS_iPad Scanner
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
iConvert Scanner
For iPad® (3rd generation), iPad 2 and iPad tablets
1
Table of conTenTs
Warnings and Cautions......................................................2
Location of Parts and Controls...............................................5
Included Accessories .......................................................6
Compatibility................................................................ 7
Power and Dock............................................................ 7
Download APP (First Time Use) .............................................8
Calibrate ...................................................................9
Scan and Save.............................................................10
Using the Protective Sleeve ................................................11
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
FAQs......................................................................14
Specifications..............................................................16
Warranty ..................................................................17
2
caUTIon
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
THERE ARE NO SERVICEABLE PARTS INSIDE.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
The lightning flash with arrow-head symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the unit’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the unit.
IMPoRTanT safeTY InsTRUcTIons
All of the safety and operating instructions should be read, adhered to and followed
before the unit is operated.
save These InsTRUcTIons
771237_INS_iPad Scanner
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
DanGeR
To reduce the risk of electric shock, burns, fire or injury:
1. Do not use while bathing or in a shower.
2. Do not place or store unit where it can fall or be pulled into a tub or sink.
3. Do not place in, drop or submerge in water or other liquid.
4. Do not reach for unit that has fallen into water. Unplug it immediately.
5. Care should be taken so that objects do not fall and liquids are not
spilled onto the unit.
WaRnInG
1. Close supervision is necessary when this product is used by or near
children or mentally disabled individuals.
2. Use this unit only for its intended use as described in this manual.
3. Unplug this unit during lightning storms or when unused for long
periods of time.
4. Never drop or insert an object into any opening other than as instructed
in this manual.
5. Protect the adapter cord from being walked on or pinched, particularly
at plug outlets and the point where it exits the unit.
6. Do not allow adapter cord to touch hot surfaces. Wrap adapter cord loosely
around the unit when storing or detach the cord and store separately.
3
7. The unit should be situated away from direct sunlight or heat sources such
as radiators, electric heaters, heat registers, stoves or other units (including
amplifiers) that produce heat. Avoid placing on top of stereo or computer
equipment that radiates heat.
8. Never block the air openings of the unit with materials such as clothing,
plastic bags or papers, or place it on a soft surface such as a bed or couch,
where the air openings may be blocked.
9. Do not overload the electrical outlet. Use only the power source as indicated.
10. Never operate this unit if it has a damaged cord or plug, if it is not working
properly, or if it has been dropped or damaged, or dropped into water. If the
unit’s adapter cord or plug is damaged, do not attempt to fix it yourself.
11. To avoid the risk of electric shock, do not disassemble or attempt to repair
the unit. Incorrect repair can cause risk of electric shock or injury to persons
when unit is used.
12. Do not operate in the presence of explosive and/or flammable fumes.
13. Never remove the plug from the outlet by pulling the adapter cord.
771237_INS_iPad Scanner
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
4
locaTIon of PaRTs anD conTRols
1. Power LED
2. Power Button
3. Paper Guides
4. Feed Slot
5. 30-Pin Connector
6. Power Port
7. Exit Slot
8. Stand
2
1
7
8
6
3
54
5
InclUDeD accessoRIes
Protective Sleeve
Power Adapter
Calibration Sheet
Roller Cleaner
Lens Cleaner
771237_INS_iPad Scanner
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
6
Stopper Strip
7
coMPaTIbIlITY
iPad (3rd generation)
iPad 2
iPad
PoWeR anD Dock
1. Connect the POWER ADAPTER to the POWER PORT on the scanner and
then plug into a wall outlet.
2. Press and hold the POWER BUTTON for up to 3 seconds to turn the scanner
on. The POWER LED will blink blue for a moment and then remain solid.
3. Turn on your iPad tablet and dock it carefully on the 30-PIN CONNECTOR
on the scanner. Make sure it sits firmly in place.
4. To turn the scanner off, press and hold the POWER BUTTON again.
The POWER LED will shut off.
Notes:
• Do not dock iPad to the scanner when the POWER LED is blinking.
Wait until the blinking stops.
• Check the battery level in the upper-right corner of your iPad tablet’s
home screen. Make sure it’s at least above 20% when docked. If not,
please charge the battery prior to docking.
8
DoWnloaD aPP (fIRsT TIMe Use)
1. After you power on the Scanner, and power on and dock your iPad, a message
will appear on your iPad tablet’s screen which will guide you to the App StoreSM
for the free iConvert Scan.
2. Follow the on-screen instructions to complete the installation.
3. Upon completion, the iConvert Scan icon will appear on your iPad tablet’s
home screen.
Notes:
• Make sure that your iPad tablet is connected to a Wi-Fi network before
you try to download and install applications. Refer to your iPad tablet’s
user manual for more information.
• Download one App at a time and do not do anything else on the iPad
while downloading an App.
771237_INS_iPad Scanner
Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk
9
calIbRaTe
To get the best material recognition results, please follow the steps below before
first use and periodically during the Scanner’s life.
1. Remove the film on the front and back of the CALIBRATION SHEET before use.
2. Make sure the CALIBRATION SHEET is clean and free of dust before use.
3. While in the iConvert Scan, tap the Settings icon in the top right hand corner
of your iPad tablet’s screen.
4. Choose Calibrate.
5. Adjust the PAPER GUIDES to center the CALIBRATION SHEET, and to
ensure it will load straight into the FEED SLOT.
6. Insert the CALIBRATION SHEET, with the printed side facing UP, into
the feed slot.
7. Tap the Calibrate button on your iPad tablet’s screen to begin calibration.
8. The CALIBRATION SHEET will pull through the FEED SLOT while adjusting
the calibration of the scanner. The sheet will come out of the EXIT SLOT when
calibration is complete.
9. The screen will return to the Scan screen and show the message “Calibration
Done”. Tap the “OK” button.
Andere Handbücher für iConvert
6
Inhaltsverzeichnis
Andere Brookstone Scanner Handbücher
Brookstone
Brookstone iConvert Bedienungsanleitung
Brookstone
Brookstone iConvert Bedienungsanleitung
Brookstone
Brookstone Photo Scanner Bedienungsanleitung
Brookstone
Brookstone Scanner Mouse Bedienungsanleitung
Brookstone
Brookstone iConvert Bedienungsanleitung
Brookstone
Brookstone iConvert Bedienungsanleitung
Brookstone
Brookstone Instant Slide & Negative Bedienungsanleitung
Brookstone
Brookstone iConvert Bedienungsanleitung
Brookstone
Brookstone Wi-Fi Scanner Wand Bedienungsanleitung
Brookstone
Brookstone iConvert Scanner V2 Bedienungsanleitung
