Brother DCP-110C Bedienungsanleitung

Quick Setup Guide DCP-110C

DCP-310CN

Before you can use the machine, you must set up the hardware and install the driver.

To help you get started in setting up the machine and installing the driver and software,

please read this “Quick Setup Guide” and follow the simple instructions.

For the latest drivers and to find the best solution for your problem or question, access the Brother

Solutions Center directly from the driver or go to http://solutions.brother.com

Keep this “Quick Setup Guide”, User’s Guide and supplied CD-ROM in a convenient place for

quick and easy reference at all times.

Version B

Step 1

Setting Up the Machine

Step 2

Installing the Driver & Software

Setup is Complete!

Installing the Driver & Software

Setting Up

the Machine

Windows®

Mac OS®

8.6 - 9.2

Mac OS®X Windows®

Network

Macintosh®

Network

For

Network Users

■

Warning Hint User’s Guide

Indicates warnings that

must be observed to

prevent possible

personal injury.

Indicates cautions that

must be observed to use

the machine properly or

to prevent damage to the

machine.

Indicates notes and

useful tips to remember

when using the machine.

Indicates reference to the

User’s Guide.

Carton components may differ from one country to another.

Save all packing materials and the carton.

Carton Components

Quick Setup Guide

CD-ROM

User’s Guide

Power Cord Control Panel

Black

(LC900BK)

Magenta

(LC900M)

Yellow

(LC900Y)

Cyan

(LC900C)

Ink Cartridges

If you are connecting the machine via USB:

■The interface cable is not a standard accessory. Please purchase an appropriate USB 2.0 interface

cable.

■Please make sure you use a USB 2.0 that is no longer than 2 metres.

■Your machine has a full speed USB 2.0 interface. This interface is compatible with Hi-Speed USB 2.0;

however, the maximum data transfer rate will be 12 Mbits/s. The machine can also be connected to a

computer that has a USB 1.1 interface.

DCP

■Getting Started

Control Panel

1. Copy keys 5. Start keys 9. PhotoCapture key

2. Set key 6. On/Off key 10. Menu key

3. Navigation keys 7. Ink key 11. Liquid Crystal Display (LCD)

4. Stop/Exit key 8. Scan key

For the details of the control panel, see "Control panel overview" in Chapter 1 of the User’s Guide.

1 2 4 53

1011 9 8 7 6

Table of Contents

Setting Up the Machine

1. Removing the Protective Parts ......................................................................... 4

2. Attaching the Control Panel.............................................................................. 4

3. Loading Paper .................................................................................................... 4

4. Installing the Power Cord..................................................................................5

5. Selecting Your Language ..................................................................................5

6. Installing the Ink Cartridges.............................................................................. 5

7. Print Quality Check ............................................................................................ 8

8. Setting the Date and Time ................................................................................. 9

Installing the Driver & Software

Supplied CD-ROM (MFL-Pro Suite).................................................................... 10

For USB Interface Cable Users

(For Windows®98/98SE/Me/2000 Professional/XP) ......................................... 12

For Network Interface Cable Users (DCP-310CN only)

(For Windows®98/98SE/Me/2000 Professional/XP) ......................................... 15

For USB Interface Cable Users .......................................................................... 18

■For Mac OS®8.6 to 9.2 .......................................................................................18

■For Mac OS®X 10.2.4 or greater........................................................................20

For Network Interface Cable Users (DCP-310CN only) .................................... 23

■For Mac OS®8.6 to 9.2 Users ............................................................................23

■For Mac OS®X 10.2.4 or greater Users.............................................................25

■For Network Users (DCP-310CN only)

Network User's Guide Chapter Map .................................................................. 28

Restoring the Network Settings to Factory Default ......................................... 28

Installing the BRAdmin Professional Configuration Utility

(Windows®Users Only) .................................................................................... 29

Setting your IP Address, Subnet Mask and Gateway using

BRAdmin Professional (Windows®Users Only)............................................. 30

■Consumables and Options

Replacement Consumables................................................................................ 31

Option ................................................................................................................... 31

Step 1

Step 2

Setting Up the Machine

1Remove the protective tape.

DO NOT connect the USB cable.

Connecting the USB cable is done

when installing the driver.

1Attach the control panel to the machine.

1Pull the paper tray completely out of the

machine and remove the output paper tray.

2Press and slide the paper guide to fit the

paper width.

3Pull out the paper support and unfold the

paper support flap.

4Fan the stack of paper well to avoid paper

jams and mis-feeds.

5Gently insert the paper into the paper tray

print side down and top edge first.

Check that the paper is flat in the tray and

below the maximum paper mark.

6Put the output paper tray back on and push

the paper tray firmly back into the machine.

1Removing the Protective

Parts

2Attaching the Control

Panel

3Loading Paper

You can load up to 100 sheets of 80 g/m2

paper.

For more details, see “About paper” in

Chapter 1 of the User’s Guide.

Use the paper support flap for Letter, Legal

and A4 size paper.

■Make sure the paper side guides touch

the sides of the paper.

■Be careful that you do not push the paper

in too far; it may lift at the back of the tray

and cause paper feed problems.

Paper Side Guide

Paper Support Flap

Paper Support

Step 1

Setting Up

the Machine

Windows®

Mac OS®

8.6 - 9.2

Mac OS®X Windows®

Network

For

Network Users Macintosh®

Network

1Connect the power cord.

DO NOT connect the USB cable yet.

Warning

The machine must be fitted with an earthed plug.

1After connecting the power cord, the LCD

shows:

Press Set.

2Press ▲or ▼to select your language and

press Set.

3If your language is selected, press ▲(Yes).

Warning

If ink gets in your eyes wash them with water

immediately, and if irritation occurs consult a doctor.

1Make sure that the power is turned on.

The LCD shows:

2Lift the scanner cover from the right-hand

side of the machine until it locks securely

into the open position.

3Remove the protective parts.

4Installing the Power

Cord

5Selecting Your

Language

Select Language

Press Set Key

English

Select▲▼ & Set

English?

▲Yes ▼No

If you have set the language wrongly, you

can change the language after setting the

date and time. (For details, see “How to

change LCD language” in Chapter 5 of the

User’s Guide)

(Example for the U.K.)

6Installing the Ink

Cartridges

No Cartridge

Do not throw away the protective parts.

You will need them when you transport the

machine.

Scanner Cover

Continued...

Setting Up the Machine

4Take out the ink cartridge.

5Carefully remove the buttom cap.

DO NOT touch the area shown in the

illustration below.

Keep the ink cartridge in an upright position

when you insert it into the slot.

6Press firmly down on the ink cartridge until

the hook snaps over it, taking care to match

the slot colour (A) with the cartridge colour

(B), as shown in the diagram below.

7Lift the scanner cover to release the lock.

Gently push the scanner cover support

down and close the scanner cover.

The machine will clean the ink tube system

for use for the first time. This process will

occur only once, the first time ink cartridges

are installed. The cleaning process will last

approximately four minutes.

The LCD shows:

If the cartridge cover comes off when you

open the bag the cartridge will not be

damaged.

Opening

If Install shows on the LCD after you

install the ink cartridges, check to make sure

the ink cartridges are installed correctly.

Preparing System

Approx 4 Minutes

(B)

(A)

Step 1

Setting Up

the Machine

Windows®

Mac OS®

8.6 - 9.2

Mac OS®X Windows®

Network

For

Network Users Macintosh®

Network

• DO NOT remove ink cartridges if

you do not need to replace them.

If you do so, it may reduce the ink

quantity and the machine will not

know the quantity of ink left in

the cartridge.

• DO NOT shake the ink cartridges.

If ink stains your body or

clothing, wash with soap or

detergent immediately.

• DO NOT dismantle or tamper

with the ink cartridge, this can

cause the ink to leak out of the

cartridge.

• Brother inkjet machines are

designed to work with ink of a

particular specification and work

to a level of optimum

performance when used with

genuine Brother ink cartridges.

Brother cannot guarantee this

optimum performance if ink or

ink cartridges of other

specifications are used. Brother

does not therefore recommend

the use of cartridges other than

genuine Brother cartridges with

this machine or the refilling of

empty cartridges with ink from

other sources. If damage is

caused to the print head or other

parts of this machine as a result

of the use of ink or ink cartridges

other than genuine Brother

products due to the

incompatibility or lack of

suitability of those products with

this machine, any repairs

required as a result will not be

covered by the warranty.

• DO NOT insert and remove the

cartridges repeatedly. If you do

so, the ink may seep out of the

cartridge.

■If you mix the colours by installing an ink

cartridge in the wrong position, you must

clean the print head by running several

cleaning cycles after correcting the

cartridge installation. (See “Cleaning the

print head” in chapter 5 Troubleshooting

and Routine Maintenance of the User’s

Guide.)

■Once you open an ink cartridge, install it in

the machine and use it up within six

months of installation. Use unopened ink

cartridges by the expiration date written

on the cartridge package.

Setting Up the Machine

1After the cleaning cycle is finished, the LCD

shows:

2Make sure the paper is loaded in the paper

tray.

Press Colour Start.

3The machine starts printing the PRINT

QUALITY CHECK SHEET (only during

initial ink cartridge installation).

Avoid touching the printed surface

of the paper immediately after

printing, the surface may not be

completely dry and may stain your

fingers.

4The LCD shows:

Check the quality of the four colour blocks

formed by the short lines printed on the

sheet.

(BLACK/ CYAN/ YELLOW/ MAGENTA)

5If all lines are clear and visible, press ▲ to

finish the quality check.

---OR---

If you can see missing short lines, press ▼

and go to 6.

6The LCD asks you if the print quality is OK

for black and colour. Press ▲or ▼on the

control panel.

After making your selection ▲(Yes) or ▼

(No) for black and colour, the LCD shows:

Press ▲(Yes), the machine will then start

cleaning the colours.

After cleaning is finished, press

Colour Start. The machine starts printing

the PRINT QUALITY CHECK SHEET again

and goes back to step 3.

7Print Quality Check

Set Paper and

Press Start

Is Quality OK?

▲Yes ▼No

Print Quality Check

1. Check the quality of the four -color blo cks formed by th e short lines.

2. If all th e short lines are clear an d visible, the quality is acceptable. the quality is acceptable.

Select (Yes). If you can see missing short lines, select (No) to begin the co lor cleaning pr ocess

and follow th e prompts on the LCD.

Black OK?

▲Yes ▼No

Start Cleaning?

▲Yes ▼No

OK Poor

Step 1

Andere Handbücher für DCP-110C

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Brother Multifunktionsdrucker Handbücher

Brother

Brother MFC-1816 Bedienungsanleitung

Brother

Brother DCP-9040CN Bedienungsanleitung

Brother

Brother MFC-J825DW Bedienungsanleitung

Brother

Brother MFC-5100C Bedienungsanleitung

Brother

Brother DCP 385C - Color Inkjet - All-in-One Bedienungsanleitung

Brother

Brother DCP-1000 Bedienungsanleitung

Brother

Brother MFC-J6945DW Bedienungsanleitung

Brother

Brother MFC-7225N Bedienungsanleitung

Brother

Brother MFC 5890CN - Color Inkjet - All-in-One Bedienungsanleitung

Brother

Brother FAX-1820C Sicherheitsleitfaden

Brother

Brother MFC-265C Bedienungsanleitung

Brother

Brother MFC-250C Bedienungsanleitung

Brother

Brother DCP-L8410CDW Technisches Handbuch

Brother

Brother DCP-J140W Bedienungs- und Wartungshandbuch

Brother

Brother DCP-110C Bedienungsanleitung

Brother

Brother MFC-J2330DW Bedienungsanleitung

Brother

Brother DCP-9040CN Bedienungsanleitung

Brother

Brother MFC 5490CN - Color Inkjet - All-in-One Bedienungsanleitung

Brother

Brother MFC-7420 Bedienungsanleitung

Brother

Brother DCP-J562DW Bedienungs- und Wartungshandbuch

Brother

Brother MFC 685CW - Color Inkjet - All-in-One Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Montageanleitung

Brother

Brother MFC-J4410DW Bedienungs- und Wartungshandbuch

Brother

Brother DCP-115C Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Copystar

Copystar CS 4551ci Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 4650EN Bedienungsanleitung