Brother MFC-9070 Bedienungsanleitung

*1 MFC Software Suite includes Printer Driver, Scanner Driver, PC-FAX software and Remote Setup.

Windows®XP restricts scanning resolution to a max. of 600 dpi and Paper size to 8.5” (215.9 mm) x 11.7” (297 mm).

3. Click MFC Software Suite in Main

Application, and then click Install. *1

2. Click Install Software.

5. When the PaperPort®8.0 SE Setup

window is displayed, click Next.7. Select Typical and click Next.6. After reading and accepting the License Agreement, enter your user information and

click Next.

Setting Up the machine and PC to Work Together

BeforeYou begin

• When necessary, please purchase the appropriate interface cable you intend to use with this machine (parallel or USB).

• Some illustrations are based on the MFC-9070.

Use only a shielded parallel interface cable that is IEEE 1284-compliant and/or a USB cable that is no longer than 6 feet long (1.8 meters).

You must set up the hardware and install the driver before you can use your machine as a printer and scanner

with your application. Brother offers both a Windows®LogoTested (WHQL) driver and a Brother Native Driver

on the CD-ROM.The Windows®LogoTested Driver is automatically installed when you follow the installation

steps below.The Brother Native driver offers some features that are not available with theWindows®Logo

Tested Driver.The features available on the Brother Native driver can vary by model. Please visit us at

http://solutions.brother.com for details on these features.You must follow steps 1 to 7 before you can proceed

to the installation procedure for the Brother Native Driver.

Installation of Brother Drivers for Windows®XP

Step 1.

Shut down and turn OFF your computer.

Step 2.

Unplug the MFC from the AC outlet and disconnect the interface cable if you have

already connected it.

Step 3.

Turn on your computer.

Note: If the“Found New HardwareWizard”appears before the installation of the software, you should click on

Cancel to exit theWizard, and then start the installation program from the CD-ROM.

Step 4.

Insert the CD-ROM labelled “For Windows®XP”into the CD-ROM drive.

For Windows®XP Users

1. Click your language.The CD-ROM

main menu will appear.

If the model name screen appears,

click on your model name.

The CD-ROM main menu will appear.

If the CD-ROM does NOT start

automatically, start the installer

application by clicking Start, Run,

then type x:\ setup.exe (where x:\ is

the drive letter of your CD-ROM

drive).

4. Click Install.

1. When the above screen appears,

click Next to start the PC-FAX and

Remote Setup Installation Program.

2. Select the folder where Setup will

install the program files. If you do not

wish to use the default directory, click

the Browse button to select a new

folder and then click Next to continue.

4. If this screen appears, select the

components to install (the default

gives you the most functionality), and

then click Next.

5. The installation process will now start. 6. If this screen appears, select the

model of the machine which you want

to use to send PC-Faxes and then

click OK.

7. Select “Yes” to restart your computer,

and then click Finish.

11. Select an interface cable, and then

press Next to start Driver installation.

For Parallel

For USB

9. When the Registration screen is

displayed, make your selection and

follow the on screen instructions.

10. Click Finish to complete ScanSoft™

PaperPort®installation.

8. Click Install and PaperPort®will start installing on your computer.

Step 5.

Connect the machine to your PC

using the parallel or USB cable.

Step 6.

Turn on the machine by plugging in the power cord (and if necessary switch on the

machine power switch).

The installation of the Brother drivers will start automatically.

Step 7.

Follow the instructions on the screen.

Note: If you are installing a DCP model, installation is complete.

3. Select the program folder in which

you wish to add the program icons,

and then click Next.

10. The model you are installing will be

listed in the window.Select Yes or No

if you want this driver to be your

default printer.

11. If the above screen appears select

“Do not share this printer” and

Next.

12. Select “Yes” and Next to print a test

page.

13. When the above screen appears click

Finish.14. If the Windows Logo testing screen

appears click Continue Anyway.This

completes the installation of the

Brother Native Driver.

Note: There will be two Brother printer drivers listed

in the Printers and Faxes selection.The driver

without hyphen in the model name

(Ex. Brother MFC9070) is the Brother Native

Driver.

Installation of Brother Native Drivers for Windows®XP

BeforeYou begin

• Please complete steps 1 to 7 of the “Setting Up the machine and PC to Work Together” before you install the Brother Native Driver.

• Make sure that the interface cable is connected between the machine and your PC and they are both powered ON.

Step 8.

Click “Start”and select “Printers and Faxes”

Step 9.

Click on “Add a printer”and the Add Printer Wizard will start.

1. When the above screen appears,

click Next.2. Un-check the “Automatically detect

and install the Plug and Play

printer” selection and then click

Next.

3. Select “BMFC (Brother MFL Port)”

from the pull down window for the

Printer Port Selection and then click

Next.

4. Click on Have Disk.

5. Browse the CD-ROM and highlight

your language folder and click Open.

Highlight the “WXP” folder and click

Open. Highlight the “Addprt” folder

and click Open.

6. Click Open.7. Make sure “X:\xxx\WXP\Addprt” is

displayed in the window and click OK

(X:\ is the drive letter of your

CD-ROM).

8. Highlight the model you are installing

from the list of machines and click

Next.

9. If the above screen appears select

“Replace existing driver” and Next.

1. To activate Faxing receiving, click Set

up faxing in the PrinterTasks menu. 2. The FAX services will be installed on

your PC. 3. A Fax icon will then appear in the

Printers and Faxes folder. If Fax

icon does not appear, click Install a

local fax printer in the Printer tasks

menu.

4. Select the Start, All Programs,

Accessories, Communications,

Fax, Fax Console.

Note: If you have not configured your

fax connection, the screen for your

local information will be displayed.

Enter your details, ensuring you

specify the outside line access

number if necessary and click OK.

Select the My location radio button if

it is not selected and then click OK.

6. Enter the sender information, and

then click Next.

5. The Fax Configuration Wizard

starts. Click Next.7. Select fax device you use in the

Please select the fax device

pull-down list.Click to select the

Enable Receive check box. Specify

the number of rings before your MFC

will attempt to answer the fax. Click

Next.

10. Select if you print a received fax or

save it in a folder, and then click

Next.

8. Enter the Transmitting Subscriber

Identification (TSID), and then click

Next.

9. Enter the Called Subscriber

Identification (CSID), and then click

Next.

11. Click Finish.

The PC-FAX installation is now

complete.

Note: When PC-FAX Receiving is active, you cannot run the Remote Setup utility.To use Remote Setup, check

off Enable Receive in item 7 of Step 10.

For information on how to use PC-FAX Sending and Receiving, please refer to Help in the Fax Console.

Setting Up and Using PC-FAX Receiving

(For the MFC-9660 and MFC-9880)

Before you can start receiving faxes, please install the appropriate Windows XP driver (Windows XP In-box driver or Brother Windows XP driver). After the driver is installed, refer to the

following information to configure your Windows XP PC for Fax receiving.

Step 10.

Setting Up Your PC

WIA compliant Scanning

Windows®XP uses Windows Image Acquisition (WIA) for scanning images from the MFC.You can scan images directly into the PaperPort®viewer that Brother included with your

MFC or you can scan images directly into any other software application that supports WIA or TWAIN scanning.

For the MFC-9070 and MFC-9660

The following Scan dialog box will appear:

1. Paper source:

You can select scanning from the Flatbed or Document Feeder.

2. Type of picture

Select the type of picture you are scanning.

3. Quality of the scanned picture

You can adjust Brightness, Contrast, Resolution and Picture type.

4. Page size:

If the paper source is set to Document Feeder you can select the Page size that will be scanned.

Install Software

You can install printer and scanner drivers and the various utility items.

Manuals

View the Owner’s Manual and other documentation.

Brother Solutions Centre

Get all contact you need if you have to get in touch with our solutions centre.

Further information

Interactive Demonstration showing features of the Printer Driver.

You can get a variety of information from this CD-ROM

What is included on the CD-ROM

Trademarks

The Brother logo and MFC Software Suite are registered trademarks of Brother Industries, Ltd.

Windows and Microsoft are registered trademarks of Microsoft in the U.S.and other countries.

For the MFC-580, MFC-590, MFC-9160, MFC-9180,

MFC-9760 and MFC-9880

The following Scan dialog box will appear:

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Brother Multifunktionsdrucker Handbücher

Brother

Brother MFC-9700 Bedienungsanleitung

Brother

Brother HL-5440D Bedienungsanleitung

Brother

Brother DCP-1400 Bedienungsanleitung

Brother

Brother mfc490w Bedienungsanleitung

Brother

Brother MFC-440CN Bedienungsanleitung

Brother

Brother MFC-J4410DW Bedienungsanleitung

Brother

Brother MFC 845CW - Color Inkjet - All-in-One Technisches Datenblatt

Brother

Brother MFC-3200C Bedienungsanleitung

Brother

Brother Intelli FAX-2920 Bedienungsanleitung

Brother

Brother MFC-9125CN Bedienungsanleitung

Brother

Brother MFC 5490CN - Color Inkjet - All-in-One Bedienungsanleitung

Brother

Brother MFC-890 Bedienungsanleitung

Brother

Brother Work Smart MFC-J470dw Bedienungsanleitung

Brother

Brother MFC-J265W Bedienungsanleitung

Brother

Brother MFC-9*970CDW Bedienungs- und Wartungshandbuch

Brother

Brother MFC-1810 Bedienungsanleitung

Brother

Brother MFC-J5945DW Bedienungsanleitung

Brother

Brother FAX-2440C Installationsanleitung

Brother

Brother FAX-2840 Bedienungsanleitung

Brother

Brother DCP-9045CDN Bedienungsanleitung

Brother

Brother MFC-J4320DW Bedienungsanleitung

Brother

Brother DCP-J125 Bedienungs- und Wartungshandbuch

Brother

Brother MFC-J6920DW Bedienungs- und Wartungshandbuch

Brother

Brother DCP 7030 - B/W Laser - All-in-One Stücklistenhandbuch

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Copystar

Copystar CS 4551ci Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 4650EN Bedienungsanleitung