Brother BE-1204C Gebrauchs- und Pflegehandbuch

Technical Reference

Title: Changing needle bar cushions

Models: BE-1204C, BE-1206B 1. Make sure the machine power is turned off.

2. Remove the covers between each head by removing

the two lower screws and loosening the two upper

screws on the BE-1204 or one upper screw on the

BE-1206.

3. Remove the right end cover by removing the two

lower screws and loosening the one upper screw.

4. Remove the right end cover by removing the two

lower screws and loosening two upper screws. Plus

removing a screw on the cover behind the head.

Remove

Loosen

Technical Reference

5. Loosen the screw on the left and remove the screw

on the right of the face plate that has the Brother logo

on it. Slide the face plate off to the right on each

head.

6. Remove the two screws of the middle thread guide

and remove the middle thread guide on all heads.

7. Remove the four hex screws from the thread take-up

lever cover and remove the cover on all heads.

8. Loosen the needle bar setscrewsand remove the

needles.

9. Now, remove the needle bar setscrews all the way

and remove the needle bar thread guidesand work

clamp cushions.

(Note: The work clamp cushion has a groove at

the top inside diameter that needs to be

facing upward during re-assembly.)

Remove

Loosen

Middle thread guide

Remove

Needle bar setscrew

Work clamp cushion

Needle bar

thread guide

Technical Reference

10. Remove the four hex screws securing the tension

base. Remove tension base from the machine by

disconnecting the harness at the back and the ground

wire held on by a screw to the tension base mount.

11. Loosen the top dead center stopper hex screws.

12. Loosen the needle bar clamp screws.

13. Pull needle bar up slowly at the top. As you are doing

so, you will need to remove the spring, presser spring

plate holder, needle bar clamp, top dead center

stopper and finally the needle bar cushion. Do not

remove needle bar completely. Pulling the needle bar

up until the bottom of it just passes the rubber cushion

will be enough.

14. Install new rubber cushion.

15. Slowly lower needle bar down installing the parts

removed in step 13 in reverse order.

16. Repeat for all needle bars.

17. Install the parts listed in steps 7 and 8 for all needles.

Remove

Needle bar clamp

Top dead center stopper

Spring

Presser spring plate holder

Pull nee

dle bar up here

Technical Reference

18. Please see “Adjusting Needle Bar Height” in

instruction manual for completing adjustment of each

needle bar. (Note: You will need to engage each

needle bar by pushing down on the needle bar clamp

until it locks in to place before performing the

adjustment.

19. Assembly machine in reverse order.

Needle bar shown engaged

Andere Handbücher für BE-1204C

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Brother Nähmaschine Handbücher

Brother

Brother 083-8775 Bedienungsanleitung

Brother

Brother 888-X53 Bedienungsanleitung

Brother

Brother BM-3500 Bedienungsanleitung

Brother

Brother Innov-is NX600 Einrichtungshandbuch

Brother

Brother BE-0901E-AC Bedienungsanleitung

Brother

Brother T-8421B Bedienungsanleitung

Brother

Brother BAS-416 Bedienungsanleitung

Brother

Brother Quattro 6000D Bedienungsanleitung

Brother

Brother DB2-B797 Bedienungsanleitung

Brother

Brother LS-2000 Bedienungsanleitung

Brother

Brother 885-403 Bedienungsanleitung

Brother

Brother BAS-411 Bedienungsanleitung

Brother

Brother HE-240 Einrichtungshandbuch

Brother

Brother LK3-B430 Bedienungsanleitung

Brother

Brother BAS-326G PS Bedienungsanleitung

Brother

Brother 681B-UG Bedienungsanleitung

Brother

Brother KE-436C Bedienungsanleitung

Brother

Brother DB2-B736 Bedienungsanleitung

Brother

Brother BES Lettering Bedienungsanleitung

Brother

Brother XL3022 Bedienungsanleitung

Brother

Brother BAS-342G PS Bedienungsanleitung

Brother

Brother BC800 Bedienungsanleitung

Brother

Brother NX-200 Bedienungsanleitung

Brother

Brother LT2-B878 Bedienungsanleitung

Beliebte Nähmaschine Handbücher anderer Marken

Riccar

Riccar RL634DE Bedienungsanleitung

Singer

Singer 2517 Bedienungsanleitung

Pfaff

Pfaff 3307-1 SERIES Bedienungsanleitung

Janome

Janome Quilt Maker Pro 18 VERSA Bedienungsanleitung

Siruba

Siruba C007JP Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer SE Bedienungsanleitung

Singer

Singer 148-5 Bedienungsanleitung

IKEA

IKEA SY Bedienungsanleitung

Pfaff

Pfaff 571 Bedienungsanleitung

Singer

Singer 15-91 Bedienungsanleitung

Pegasus

Pegasus WT100 Series Bedienungsanleitung

Reliable

Reliable 7100DB Bedienungsanleitung

Pfaff

Pfaff 937 Bedienungsanleitung

Singer

Singer 6038 Bedienungsanleitung

Singer

Singer 413K Bedienungsanleitung

Pfaff

Pfaff 1471 E1 Bedienungsanleitung

Kenmore

Kenmore 16677 - Serger Sewing Machine Bedienungsanleitung

HIGHLEAD

HIGHLEAD GC2008-M Bedienungsanleitung