Bryant Evolution Connex Control Bedienungsanleitung

SYSTXBBECC01--B

EvolutionrConnextControl

Installation Instructions

A170204B

NOTE: Read the entire instruction manual before starting the installation.

NOTE:Please refer to the literature provided with the connected HVAC equipment

for more details on system operations with specific pieces of equipment.

The features and functions outlined in the Installation Instructions reflect Version 1.3 or

later software. Occupancy sensing compatibility is only available with Series B

Evolution Connex Controls. See the Evolution Connex product page on the

HVACPartners.com website or the Downloads section of the

www.MyEvolutionConnex.Bryant.com website for the latest software release and

literature.

US Patents: CarrierrU.S. Pat No. 7,243,004, CarrierrU.S. Pat No. 7,775,452,

pointSETtU.S. Pat No. 7,415,102

TABLE OF CONTENTS

PAGE

1.Safety Considerations 1.............................................

2.Introduction 2.....................................................

3.Quick Start 3......................................................

3.1. Set Time and Date 3............................................

3.1.1. Manually Adjust Time and Date 3............................

3.1.2. Setup Time Zone 4........................................

3.1.3. Enable Time Synchronization 4..............................

3.2. Set Dealer Information 5........................................

4.Installation 6......................................................

4.1. Overview 6...................................................

4.2. Check Equipment 6............................................

4.3. Location 7....................................................

4.3.1. Wall Control 7...........................................

4.3.2. Remote Room Sensors 8...................................

4.3.2.1.Remote Room Sensor Averaging 8...........................

4.3.3. Smart Sensors (for zoning applications) 9......................

4.4. Wiring Considerations 9.........................................

4.4.1. Shielded Wire and Communication Bus Configuration 11..........

4.4.2. Damper Control Module 12.................................

TABLE OF CONTENTS (cont.)

PAGE

4.5. Decorative Trim Plate 13........................................

4.5.1. Mounting 13.............................................

4.5.2 System Control Mounting 14................................

4.6. Humidifier Connections 16......................................

4.6.1. Bypass Humidifier 16......................................

4.6.2. Fan Powered Humidifiers 16................................

5.Commissioning 17.................................................

5.1.Searching for Indoor Unit 17.....................................

5.2.Searching for Outdoor Unit 18....................................

5.3.Indoor Evaporator Selection 19...................................

5.4. Electric Heater Selection 19......................................

5.4.1. Hydronic Heat Application 20...............................

5.5. Searching SAM Module (If Applicable) 21..........................

5.6.Searching for Zones (If Applicable) 22.............................

5.7. Filter Type Selection 22.........................................

5.8. Humidifier Installation 22........................................

5.9. Ultraviolet Lights Installation 23..................................

5.10.Equipment Summary 23........................................

5.11.Airflow Verification Check 23....................................

5.12.Duct Assessment (zoned systems only) 24..........................

TABLE OF CONTENTS (cont.)

PAGE

6.Service Menu 26...................................................

6.1. Equipment Summary 27.........................................

6.2. Installation 28.................................................

6.3. Set up 29.....................................................

6.3.1. Thermostat 30............................................

6.3.1.1.Auto Mode set up 30......................................

6.3.1.2.Heat/Cool Deadband 32...................................

6.3.1.3.Offsets 32..............................................

6.3.1.4.Reset factory defaults 34...................................

6.3.1.5.Scheduling On/Off 34.....................................

6.3.1.6.Smart Recovery On/Off 35.................................

6.3.2. Fan Coil 36..............................................

6.3.2.1.Airflow 36..............................................

6.3.2.2.Altitude 37.............................................

6.3.2.3.Dehumidification Options 37...............................

6.3.2.4.Fan Coil G--Terminal 38...................................

6.3.2.5.Fan Coil G--Terminal Alert 39...............................

6.3.2.6.Fan Coil G--Terminal Label 40..............................

TABLE OF CONTENTS (cont.)

PAGE

6.3.3. Furnace 41..............................................

6.3.3.1.Furnace Airflow 41.......................................

6.3.3.2.AC/HP Airflow 42.......................................

6.3.3.3.Furnace Staging 43.......................................

6.3.3.4.Furnace Airflow Limits (modulating furnace only) 43............

6.3.3.5.Furnace Off Delay 44.....................................

6.3.3.6.Altitude 44.............................................

6.3.3.7.Furnace Dehumidifier Drain 44.............................

6.3.3.8.Furnace G Terminal 45....................................

6.3.3.9.Furnace G Terminal Alert 46...............................

6.3.3.10.Furnace G Terminal Alert Label 46.........................

6.3.4. AC/Heat Pump 47........................................

6.3.4.1.Latching 47.............................................

6.3.4.2.Cooling Lockout 49......................................

6.3.4.3.Defrost Interval 49.......................................

6.3.4.4.Low Ambient Cooling 49..................................

6.3.4.5.Quiet Shift 50...........................................

6.3.4.6.AC/Heat Pump RPM Max 50...............................

6.3.4.7.Defrost Fan Delay 50.....................................

6.3.4.8.Brownout Disable 50.....................................

TABLE OF CONTENTS (cont.)

PAGE

6.3.4.9.Low Air Multiplier 51.....................................

6.3.4.10.Energy Efficiency 51.....................................

6.3.5. Heat Source Lockout 51....................................

6.3.6. Stages / Latch for 18VS 52..................................

6.3.7. Geo HP 53..............................................

6.3.7.1.Freeze Limits 54.........................................

6.3.7.2.Lockout Count 55........................................

6.3.7.3.Brownout Override 56....................................

6.3.7.4.Geothermal HP Energy Tracking 56..........................

6.3.8. Zoning (If Applicable) 57...................................

6.3.8.1.Zoning Disable 57........................................

6.3.8.2.Zone Offsets 57..........................................

6.3.8.3.Zone Airflow Limits 58....................................

6.3.8.4.Duct Assessment Time 58..................................

6.3.9. Accessories 59...........................................

6.3.9.1.Filter 59................................................

6.3.9.2.Humidifier 60...........................................

6.3.9.3.Ultraviolet Lights 60......................................

6.3.9.4.Ventilator 60............................................

TABLE OF CONTENTS (cont.)

PAGE

6.3.10. Utility Curtailment 61......................................

6.3.11. Hydronic Airflow 62......................................

6.4. Check out 63.................................................

6.4.1. Electric Heat 64..........................................

6.4.2. Furnace 64..............................................

6.4.3. Hydronic 65.............................................

6.4.4. Air Conditioning 65.......................................

6.4.5. Heat Pump Heating 66.....................................

6.4.6. Heat Pump Cooling 67.....................................

6.4.7. Humidifier 67............................................

6.4.8. Ventilator 68.............................................

6.4.9. Zoning (If Applicable) 68...................................

6.4.9.1.Airflow Limits 68........................................

6.4.9.2.Damper/Sensor Check 69..................................

6.4.9.3.Zone Duct Assessment 69..................................

6.4.9.4.Sensor Type 70..........................................

TABLE OF CONTENTS (cont.)

PAGE

6.5. Service Information 70..........................................

6.5.1. Advanced Diagnostics 70...................................

6.5.2. Fan Coil Status 71........................................

6.5.3. Furnace Status 71.........................................

6.5.4. AC Status 72.............................................

6.5.5. Heat Pump Status 72......................................

6.5.6. Geo HP Status 73.........................................

6.5.7. Zoning Status 73..........................................

6.5.8. Last 10 System Events 74...................................

6.5.9. Run/Fault History 75......................................

6.5.10. Model/Serial Numbers 75...................................

6.5.11. Service Phone Number 76..................................

6.5.12. Energy Tracking 76.......................................

6.6.Refrigerant Charging: Greenspeed, 18VS, 19VS Systems 77.............

6.6.1. Charging 78.............................................

6.6.2. Pump down 80...........................................

6.6.3. Evacuation 80............................................

6.6.4. EXV Position 81..........................................

TABLE OF CONTENTS (cont.)

PAGE

6.7. Dealer Logo 81................................................

6.8. Utility Event Setup 83..........................................

7.Wireless Setup 84..................................................

7.1.Setup and Status Information (Homeowner’s Router) 85................

7.2.Setup and Status Information (Dealer--provided Router) 88..............

8.Wiring Diagrams 93................................................

9.Statement Information 104...........................................

9.1. FCC Interference Statement 104...................................

NOTE: See the Owner’s Manual for information regarding software upgrades.

1. Safety Considerations

Improper installation, adjustment, alteration, service, maintenance, or use can cause

explosion, fire, electrical shock, or other conditions which may cause death,

personal injury or property damage. Consult a qualified installer, service agency or

your distributor or branch for information or assistance. The qualified installer or

agency must use factory--authorized kits or accessories when modifying this HVAC

system. Refer to the individual instructions packaged with the kits or accessories

when installing.

Follow all safety codes. Wear safety glasses, protective clothing, and work gloves.

Have a fire extinguisher available. Read these instructions thoroughly and follow

all warnings and cautions included in literature and attached to the unit. Consult

local building codes and the current edition of the National Electrical Code (NEC)

NFPA 70. In Canada, refer to the current editions of the Canadian Electrical Code

CSA C22.1.

Recognize safety information. When you see this symbol on the unit and in

instructions or manuals, be alert to the potential for personal injury. Understand the

signal words DANGER,WARNING,andCAUTION. These words are used with

the safety--alert symbol. DANGER identifies the most serious hazards, which will

result in severe personal injury or death. WARNING signifies hazards, which could

result in personal injury or death. CAUTION is used to identify unsafe practices,

which may result in minor personal injury or product and property damage. NOTE

is used to highlight suggestions which will result in enhanced installation,

reliability, or operation.

Andere Handbücher für Evolution Connex Control

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bryant Thermostat Handbücher

Bryant

Bryant T1-PAC01-A Bedienungsanleitung

Bryant

Bryant Preferred T6-PRH01-B Bedienungsanleitung

Bryant

Bryant EVOLUTION Zone Control SYSTXBBUIZ01-B Bedienungsanleitung

Bryant

Bryant OM TSTAT-1 Leitfaden

Bryant

Bryant TSTATBBPB501 Leitfaden

Bryant

Bryant TSTAT Anleitungen und Rezepte

Bryant

Bryant 53DFS250-SL-BRY Bedienungsanleitung

Bryant

Bryant T2--WHS01 Bedienungsanleitung

Bryant

Bryant TSTATBBP071-01 Abmessungen und Installationsanleitung

Bryant

Bryant PROGRAMMABLE DIGITAL TERMOSTAT OM 17-101 Bedienungsanleitung

Bryant

Bryant Programmable Thermidistat Bedienungsanleitung

Bryant

Bryant TSTATBBP250-01 Leitfaden

Bryant

Bryant AND THERMIDISTAT CONTROL Montageanleitung

Bryant

Bryant TSTATBBPSP2-WC Abmessungen und Installationsanleitung

Bryant

Bryant Legacy Touch-n-Go T2- PHP01- A Bedienungsanleitung

Bryant

Bryant LEGACY LINE-RNC T1-NAC Bedienungsanleitung

Bryant

Bryant T2--WHS01 Bedienungsanleitung

Bryant

Bryant TSTATCCPB101 Bedienungsanleitung

Bryant

Bryant LEGACY LINE-RNC T1-PAC Bedienungsanleitung

Bryant

Bryant 53DFST2-NP-BRY Bedienungsanleitung

Bryant

Bryant LEGACY T2-PAC Bedienungsanleitung

Bryant

Bryant TEMPSURE COMMERCIAL THERMOSTAT P/N... Kurzanleitung

Bryant

Bryant PREFERRED T6-NRH Bedienungsanleitung

Bryant

Bryant PREFERREDT A07044 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung