Bryton Rider 15 neo Bedienungsanleitung

Rider 15 neo
User Manual

WARNING
Always consult your physican before you begin any training. Please read the details in Warranty
and Safety information guide in the package.
Australian Consumer Law
Our goods come with guarantees that can not be excluded under the New Zealand and Australian
Consumer Laws. You are entitled to a replacement or refund for a majory failure and for
compensation for any other reasonably forseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a majoy failure.
Video Tutorial
For a step-by-step demonstration of device and Bryton Active app, please scan the QR code below
to check out Bryton Tutorial Videos.
http://www.youtube.com/c/BrytonActive

3 Table of Contents
Getting
Started
Table of
Contents Settings Bryton App Appendix
Table of Contents
Getting Started ......................4
Rider 15 neo Key Functions ......... 4
Reboot Rider 15 neo ................... 5
Accessories ................................ 5
Charge Rider 15 neo ................... 6
Icon Description .......................... 6
Initial Setup ............................... 7
Step 1: Power On Rider 15 neo .... 7
Step 2: Select Unit ..................... 7
Step 3: Acquire GPS Signal ......... 7
Step 4: Ride with Rider 15 neo .... 8
Step 5: Install on Bikes ............... 9
Share Your Records . .................. 10
Bryton Update Tool .................... 12
Settings ........................... 13
Bike Profiles ............................. 13
Calibrate Altitude ....................... 13
Sensor Pairing ........................... 14
Delete Data ............................... 15
Select Unit ................................ 15
Set the Time .............................. 16
Odometer .................................. 16
Reset Data ................................ 16
Bryton App Advanced Settings ..17
Notifications ............................. 17
Change Data Field ...................... 17
Altitude Calibration ...................... 18
Appendix ........................ ..19
Specification ............................ 20
Battery Information ................... 21
Wheel Size Chart ....................... 23
Install Speed/Cadence Sensor ..... 24
Install Heart Rate Belt ............... 25
Basic Care For Your Rider 15 neo... 26

4 Getting Started
Getting
Started
Table of
Contents Settings Bryton App Appendix
Getting Started
This section will guide you on the basic preparations before you start using your Rider 15 neo.
Rider 15 neo Key Functions
POWER/MENU/BACK ( / / )
Power:
xPress to turn the device on.
xLong press to turn the device off.
Menu:
xPress to enter/exit menu.
Back:
xPress to go back to main menu.
BACKLIGHT/PAGE ( / )
Backlight:
xLong press to turn on/off backlight.
Page:
xIn Menu, press to move down to scroll through
menu options.
xIn Meter mode, press to switch data page.
OK/RECORD ( )
OK:
xIn Menu, press to confirm a
selection.
Record:
xIn free cycling, press to start
recording.
xWhen recording, press to stop
recording.

5 Getting Started
Getting
Started
Table of
Contents Settings Bryton App Appendix
Reboot Rider 15 neo
To reboot the Rider 15 neo, press the two keys ( / ) at the same time.
Accessories
The Rider 15 neo comes with the following accessories:
USB Cable Bike Mount
Optional items:
Smart Heart Rate Monitor Smart Speed Sensor Smart Cadence Sensor

6 Getting Started
Getting
Started
Table of
Contents Settings Bryton App Appendix
Charge your Rider 15 neo
Icon Description
Before start using the device, connect Rider 15 neo to a PC
with Bryton USB cable to charge the battery for at least 4
hours.
The temperature suitable for charging battery is 0°C ~ 40°C.
PC
At least 4 Hours
Power Status
Above/Below
Average Speed
Heading
Strong GPS Signal
Bike 2
No GPS Signal
(Not fixed)
Backlight
Recording
Pause
Gradient
Ride Time
Trip Time
Ride Time / Trip Time /
Current Time
Cadence Sensor
Afternoon
Unit of Temperature
Unit of Length
Heart Rate Sensor
Distance
Altitude Gain
Altitude Loss
Odometer
Call Notification
Maximum
Average
Email Notification
Text Notification
Setting Mode

7 Getting Started
Getting
Started
Table of
Contents Settings Bryton App Appendix
Initial Setup
When turning on Rider 15 neo for the first time, the setup wizard appears on the
screen. Follow the instruction to complete setup.
Step1. Turn on Rider 15 neo
Press to turn on Rider 15 neo.
Step2. Select Unit
Select "km/h, ˚C" or "mi/h, ˚F".
Step3. Acquire GPS Signal
xOnce the Rider 15 neo is powered on, it
will automatically search for GPS signal.
xIt may take 30 to 60 seconds to acquire
signal for the first time.
km/h, ˚C
mi/h, ˚F
Confirm

8 Getting Started
Getting
Started
Table of
Contents Settings Bryton App Appendix
Note: Please avoid the obstructed environments since they might affect the GPS reception.
Tunnels
Inside rooms,
building, or
underground
Underwater High-voltage
wires or television
towers
Construction
sites and heavy
traffic
4. Ride with Rider 15 neo
After acuired GPS signal, you can enjoy
your ride with Rider 15 neo.
xFree ride:
xMeasurement starts and stops
automatically in sync with the
movement of the bicycle.
xStart riding and recording your ride:
xPress to start recording, press
again to pause recording.
xTo see if you’re recording, check if
the Record and Pause icon show in
recording mode. If the icons don’t
show on the screen, it means the ride
is not recording. Press to start
recording.
xStop recording:
xPress to pause recording before
you stop recording.
xThen press again to stop
recording. If you’d like to continue
recording, press to switch option
and press to confirm to keep
recording.
Note: To see if you’re recording, check with the Record and Pause icon show in recording mode.

10 Getting Started
Getting
Started
Table of
Contents Settings Bryton App Appendix
Share Your Records
Sync Tracks to Bryton Active App
Manually upload tracks to Bryton Active App after riding.
Sync via BLE
a. Scan QR code below to download Bryton Active App
or go to Google Play/App Store to search Bryton Active
App. Then, log in or create an account.
b. Go to Settings > Device Manager > + > Rider 15 neo
to add your GPS device.
c. Check if the UUID shown on app is as same as your
device. Select “Yes” to confirm adding this device. If
the UUID does not match, press NO and try again.
d. Successfully added! Now click BT Sync to upload
new tracks to Bryton Active App.
Note: Bryton Active App syncs with Brytonactive.com. If you already have a brytonactive.com
account, please use the same account to log in to Bryton Active App and vice versa.
e
o
R
ider 1
5
n
e
Inhaltsverzeichnis
Andere Bryton Kilometerzähler Handbücher



















