Buffalo WCR-G54 Gebrauchsanweisung

Andere Buffalo Drahtloser Zugangspunkt Handbücher

Buffalo

Buffalo AirStation WZR-1750DHP Bedienungsanleitung

Buffalo

Buffalo WLA-G54C Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

Buffalo

Buffalo AirStation Pro WAPS-APG600H Bedienungsanleitung

Buffalo

Buffalo AirStation WHR-G125 Bedienungsanleitung

Buffalo

Buffalo AirStation WBR-B11 Bedienungsanleitung

Buffalo

Buffalo AirStation WLI-UC-G Bedienungsanleitung

Buffalo

Buffalo WCR-HP-GN Bedienungsanleitung

Buffalo

Buffalo AirStation WZR-600DHP Bedienungsanleitung

Buffalo

Buffalo AirStation Pro WAPS-APG600H Bedienungsanleitung

Buffalo

Buffalo WLM-L11G Bedienungsanleitung

Buffalo

Buffalo AirStation Pro WAPS-APG600H Bedienungsanleitung

Buffalo

Buffalo AirStation WLMR-L11G Bedienungsanleitung

Buffalo

Buffalo AirStation WLM2-G54 Bedienungsanleitung

Buffalo

Buffalo AirStation WZR-600DHP Bedienungsanleitung

Buffalo

Buffalo AirStation Nfiniti WZR-HP-G300NH Bedienungsanleitung

Buffalo

Buffalo WLA2-G54C Bedienungsanleitung

Buffalo

Buffalo WLA2-G54C Bedienungsanleitung

Buffalo

Buffalo AirStation WBR-BII Bedienungsanleitung

Buffalo

Buffalo Nfiniti WLAE-AG300N Bedienungsanleitung

Buffalo

Buffalo Nfiniti WLAE-AG300N Bedienungsanleitung

Buffalo

Buffalo WLI-UTX-AG300 Bedienungsanleitung

Buffalo

Buffalo AirStation Pro WAPS-APG600H Bedienungsanleitung

Buffalo

Buffalo WCA-G Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

WCR-G54 Router Access Point Settings

1. At the back of router, set the switch to “Router mode

2. Power on Buffalo Router, and wait for 2 minutes.

The “Power , “Router and “Wireless indicators will be ON, and other

indicators will be OFF.

3. To reset the router, please insert “RESET hole by a paper clip for about

10 seconds, and wait for 2 minutes.

The “Power , “Router and “Wireless indicators will be ON, and other

indicators will be OFF.

4. Please use network cable to connect “LAN1 port on the ROUTER to

the Ethernet adapter on your PC. Make sure indicator besides “LAN1 is

ON.

Last Update 24April 2008 WCR-G54 Access Point Page 1

WCR-G54 Router Access Point Settings

Buffalo Router Wireless Settings:

Launch Web Browser, enter http://192 168 11 1 in address bar and then press

Enter. Then type username as “root”, default no password.

1. Click “Wireless Config -> Click “Basic(11g). Under SSID, the default

“SSID (wireless network signal name) of router is set to “Use

Airstation's MAC Address (XXXXXXXXXXXX) . If you want to use

another name as SSID, please choose “Use , and input a new name on

the field behind.(Remark: Cannot exceed 32 characters, and leaving

blank in between is not recommended),

Under Wireless Channel, please fix a wireless channel for your router.

(Using “Auto Channel is not recommended). Please try channel 1, 6,

11, or other channels until the wireless network is stable. Please click

“Apply to save settings.

Please click “Apply again, and wait for 2 minute to complete settings.

5. To secure your wireless network, please click “Security(11g) .

Under “Wireless Encryption ,

- Choose “WEP ,

- Set “WEP Encryption Key to Character Input: 13 characters

(WEP128) .

- Behind “1, input a 13 characters wireless encryption key to secure the

wireless network.

- Click “Apply button to save settings.

Last Update 24April 2008 WCR-G54 Access Point Page 2

WCR-G54 Router Access Point Settings

Please click “Apply again, and wait for 2 minute to complete settings. Connect Access Point to the existing network

1. Remove network cable connecting from your computer to router

2. At the back of router, set the switch to “Bridge mode

3. The “Router indicator will be OFF.

4. Connect “LAN 1 port of Buffalo router to your existing network.

Settings Complete.

Last Update 24April 2008 WCR-G54 Access Point Page 3