Bunn ULTRA 2 Slush Puppie Bedienungsanleitung

QUICK REFERENCE GUIDE FOR OPERATION AND MAINTENANCE MODEL:

BUNN ULTRA 2

EQUIPMENT SETUP GUIDE

• Unbox Bunn Ultra2 and place on counter top.

• Ensure 6” of space around machine for ventilation.

• Plug into dedicated 110v circuit.

• Do not use an extension cord.

(See “Initial Setup” of the BUNN Installation & Operating Guide)

Rinse and sanitize hoppers and hopper components prior to lling with product.

(See Steps 11 - 13 of the “Disassembly & Cleaning” section of the “USE & CARE INSTRUCTIONS FOR ULTRA 1 & 2 COLD DRINK DISPENSER)

Follow the provided “ASSEMBLY” section of the “USE & CARE INSTRUCTIONS FOR ULTRA

1 & 2 COLD DRINK DISPENSER” to complete the dispenser installation.

Add 5 parts water 1 one part concentrate to mixing jug.

Shake and pour into Hopper (s).

Power on Bunn Ultra. Press Auger button to activate auger. Press temperature button and set to “ICE”

Read and follow the BUNN ULTRA Installation & Operating Guide included with your kit.

This Equipment Setup Guide is not intended to replace any manufacturer’s process or procedure.

POWER

AUGER

TEMPERATURE

The ICEE Company, Ontario, CA 91761

92801932_SP_IQRG_BUNN

CUSTOMER SERVICE: 1-800-423-3872

For more Setup help, click or go to:

http://slushpuppie.com/store/kit-setup/

QUICK REFERENCE GUIDE FOR OPERATION AND MAINTENANCE MODEL:

BUNN ULTRA 2

SIGNAGE SETUP GUIDE

Install the SLUSH PUPPiE graphic to the BUNN ULTRA.

Click the image to watch the instructional video.

(Your BUNN ULTRA may already have the SLUSH PUPPiE decal applied.)

Hang the SLUSH PUPPiE Mobile

above the dispenser

using the provide C-Clips.

• Apply pricing to the Pricing Easel.

(We recommend: $1.19 12oz, $1.59 16oz and $1.99 24oz)

• Attach Pricing Easel to Cup

Dispenser with 2 sided clip.

When complete, your SLUSH PUPPiE

program should include:

• Hanging Mobile Sign

• Cup Dispenser

• Pricing Sign

• Beverage Dispenser Decal

Apply 2 sided Window Sign to window and Pole Cup

Sign to outside pole using zip ties to advertise your

SLUSH PUPPiE program and encourage customer

impulse purchases.

(Pole Cup Sign may not be included in some kits.)Window Decal

Pole Cup SIgn

The ICEE Company, Ontario, CA 91761

92801932_SP_IQRG_BUNN

CUSTOMER SERVICE: 1-800-423-3872

For more help, click or go to:

http://slushpuppie.com/store/kit-setup/

QUICK REFERENCE GUIDE FOR OPERATION AND MAINTENANCE MODEL:

BUNN ULTRA 2

BASIC OPERATIONS and SETTINGS

Pour pre-mixed

product into hopper

and install lids.

Press the ON / OFF

button to power unit on.

Press the AUGER

button to activate the

auger.

Press and release the

TEMPERATURE button

to cycle through options

and set to “ICE”.

122

3 3

4 4

Press ULTRA (-) to decrease the current YEAR value.

Press ICE (+) to increase the current YEAR value.

Press GOURMET (NEXT) to move forward to MONTH,

DAY, HOUR, MINUTE and SECOND screens.

Press the I|O button (BACK) to move to the previous

screen if needed.

Press the Ultra button to decrease

the current value.

Press the ICE button to increase

the current value.

Press the GOURMET button to

proceed to the next screen.

Press ICE (YES) to set the date and time.

Press and hold the GOURMET button for

5 secs. When the screen reads : “Cleaning

Guide?” Press and release the gourmet

button to advance through screens until you

reach “SET DATE TIME?”

Press and hold the GOURMET button for

5 secs. When the screen reads : “Cleaning

Guide?” Press and release the gourmet

button to advance through screens until you

reach “SET NIGHT TIME”

Use the GOURMET

button to move

to the NEXT screen.

DATE AND TIME:

NIGHT AND DAY TIME:

SET DATE TIME?

NO YES

YEAR 2017

(-) NEXT (+)

SET NIGHT TIME

(-) OFF (+)

SET DAY TIME

(-) OFF (+)

The setting of the Day/Night mode allows the dispenser to “power down” during off hours. The bottom corners displaying “ICE” will change to “CHILL” during the night mode. During night

mode, the product will be kept chilled below 35°F. “ICE” reading will return after night mode elapses. With “OFF” representing 12:00 AM, the operator can scroll to the times desired for the

night time mode to begin and end.

The ICEE Company, Ontario, CA 91761

92801932_SP_IQRG_BUNN

CUSTOMER SERVICE: 1-800-423-3872 For more help, click or go to:

http://slushpuppie.com/store/maintenance/

QUICK REFERENCE GUIDE FOR OPERATION AND MAINTENANCE

MODEL:

BUNN ULTRA 2

CLEANING

This guide is for quick reference only and is not intended to replace the information in the Operation Manual or Local Health Regulations!

TURN COOLING TO OFF SELECTION. EMPTY ALL PRODUCT FROM HOPPER(S). TURN AUGER TO OFF SELECTION.

Unplug the hopper

lamp cord(s) and

remove the hopper

lid(s).

Depress the

hopper lock

plunger, lift slightly.

Pull the hopper

assembly forward

and remove.

Pull the auger from

the cooling drum.

Remove the

hopper seal from

the ange on the

cooling drum.

CAUTION: Faucet valve

is under spring tension.

Spread one side of the

handle rst, then the

other and disconnect from

hopper.

Carefully slide

valve up to remove

spring and faucet

seal. Extra care

should be taken

when handling the

seal to prevent

damage.

Remove the auger

nose bushing from

inside the front of the

hopper. NOTE: Do not

scratch this surface

when cleaning. Deep

scratches could cause

leakage around the

seal.

Place all parts in a clean sink with mild hot water (120°F) and sanitizer solution.

Allow all parts to soak for at least 5 minutes. Carefully wash all components

with a clean wash cloth in the hot water and sanitizer solution. Use a clean,

soft bristle brush as needed for the smaller components and tight areas. Do

not immerse hop-per lids. Use a commercial sanitizer that has 100 ppm of

available chlorine with a concentration level of at least 3% available chlorine

(KAY-5 Sanitizer). Follow the sanitizer’s mixing instructions to ensure 100 ppm of

available chlorine.

9. Remove the drip

tray and cover. Wash the drum(s), hopper drip tray(s), top cover(s), and outer enclosure

using a clean wash cloth that has been dampened in the hot water and

sanitizer solution. Pay particular attention to the shaft area and make sure it is

thoroughly cleaned and sanitized.

Thoroughly rinse all surfaces with a clean wash cloth that has been dampened

with hot water. Wipe dry with a clean dry wash cloth before reassembling the

dispenser.

NOTE – Although most parts are dishwasher safe, they may be affected by the chemicals in some commercial sanitizing agents. Do not place the hopper nor hopper

lids in a dishwasher. Rinse thoroughly before assembly.

The ICEE Company, Ontario, CA 91761

92801932_SP_IQRG_BUNN

CUSTOMER SERVICE: 1-800-423-3872 For more help, click or go to:

http://slushpuppie.com/store/maintenance/

QUICK REFERENCE GUIDE FOR OPERATION AND MAINTENANCE MODEL:

BUNN ULTRA 2

ASSEMBLY

12 3 4 5

6710

Replace the auger nose

bushing inside the front of

the hopper.

Install the hopper seal over

the ange at the rear of the

cooling drum as shown.

Align the auger shafts

with the augers. Push the

augers as far as they will

go and rotate them so the

at face of the auger shaft

is aligned with the at face

of the auger nose.

Install the hopper over the

auger and cooling drum and

slide it into place. Push down

until the hopper lock plunger

snaps into place.

Set the hopper lid on the

hop-per with lamp cord at the

back.

Plug in the hopper lid lamp

cord.

Position the faucet seal and

the return spring in the faucet

valve.

Slide the faucet valve

assembly into place on the

hopper.

Turn ON augers and cooling function to desired settings.

All product must be thoroughly mixed BEFORE adding it

to the hoppers.

Press down on the valve to

compress the spring. Position

the faucet handle over the

faucet valve one side at a

time and snap into place on

the hopper.

Install the drip tray and cover.

The ICEE Company, Ontario, CA 91761

92801932_SP_IQRG_BUNN

CUSTOMER SERVICE: 1-800-423-3872

For more help, click or go to:

http://slushpuppie.com/store/maintenance/

PROBLEM REASON SOLUTION NOTES

Lid lights ash on and off Beverage levels low Rell beverage hopper with premixed product

Product not freezing

Ambient temperature too high Be sure there is a minimum of 6 inches of air space at the

top, back and sides of the dispenser.

Maximum ambient temperatures not to

exceed 90 degrees

Temperature setting set to “Off”

or “Chill” Set temperature setting to “ICE”

Consistency set too low Set the Consistency setting to a higher value. See

SETTINGS portion of this guide.

Default value is 10

Possible range (01 - 16)

Insufcient power to

compressor

Be sure the power receptacle is properly rated for your

dispenser.

Dirty Filter

1. Remove lter from back of unit.

2. Soak lter in hot soapy water.

3. Rinse, Dry and Replace lter.

Faucet Leakage Faucet seal misaligned or

damaged or misaligned

• Follow the recommended cleaning guide to remove

and inspect the faucet seal.

• If the faucet seal was misaligned, realign the seal,

reassemble and recheck for leaks.

• If damaged - call for service.

DO NOT LUBRICATE the faucet seal

Product leaking below the hopper Rear drum seal misaligned or

damaged.

• Follow the recommended cleaning guide to remove

and inspect the rear drum seal.

• If the drum seal was misaligned, realign the seal,

reassemble and recheck for leaks.

• If damaged - call for service.

The tapered end of the seal must face to the

front of the dispenser

DISPLAY MESSAGE:

“FILTER CLEANING REQUIRED”

Preventive Maintenance

Reminder 1. Remove lter from back of unit.

2. Soak lter in hot soapy water.

3. Rinse, Dry and Replace lter.

4. Hold ULTRA button for 3 seconds to reset message

Dirty Filter

Insufcient air ow

DISPLAY MESSAGE:

*SENSOR ERROR VARIOUS All display messages containing:

“SENSOR ERROR” require a call for service.

All sensor errors should be evaluated and

repaired by a qualied service technician.

QUICK REFERENCE GUIDE FOR OPERATION AND MAINTENANCE MODEL:

BUNN ULTRA 2

TROUBLE SHOOTING GUIDE

Before you call for service...

The ICEE Company, Ontario, CA 91761

92801932_SP_IQRG_BUNN

CUSTOMER SERVICE: 1-800-423-3872 For more help, click or go to:

http://slushpuppie.com/store/maintenance/

Inhaltsverzeichnis

Andere Bunn Getränkespender Handbücher

Bunn

Bunn FMD-1 Bedienungsanleitung

Bunn

Bunn TDS3.5 Betriebsanleitung

Bunn

Bunn JDF-2S Bedienungsanleitung

Bunn

Bunn Single TF Betriebsanleitung

Bunn

Bunn TDO-3.5 Betriebsanleitung

Bunn

Bunn TDO-N-4.0 Betriebsanleitung

Bunn

Bunn IMIX-5S+ Fehlerbehebungshandbuch

Bunn

Bunn SLCA-7 Bedienungsanleitung

Bunn

Bunn FMD-3 Gebrauchsanweisung

Bunn

Bunn FCD-4 Bedienungsanleitung

Bunn

Bunn FMD DBC-3 Gebrauchsanweisung

Bunn

Bunn TDO-3.5 Betriebsanleitung

Bunn

Bunn FMD-1 Gebrauchsanweisung

Bunn

Bunn FMD-3 Installationsanleitung

Bunn

Bunn TDO-4 Betriebsanleitung

Bunn

Bunn HC-2 Gebrauchsanweisung

Bunn

Bunn ThermoFresh 44050.0250 Kurzanleitung

Bunn

Bunn FMD-1 Betriebsanleitung

Bunn

Bunn AFPO-2 Installationsanleitung

Bunn

Bunn TDS5 Betriebsanleitung

Bunn

Bunn TCD-1 Bedienungsanleitung

Bunn

Bunn FMD-2 Gebrauchsanweisung

Bunn

Bunn HC-1 Bedienungsanleitung

Bunn

Bunn Single TF Bedienungsanleitung

Beliebte Getränkespender Handbücher anderer Marken

PEGAS

PEGAS Evolution Bedienungsanleitung

Ugolini

Ugolini MT micro Bedienungsanleitung

Gekkeikan

Gekkeikan Sake Machine Bedienungsanleitung

Olympia

Olympia DH709 Bedienungsanleitung

Marco

Marco ECOSMART PB10 Bedienungsanleitung

Marvel

Marvel ML24BN Series Handbuch

Cecilware

Cecilware 2K-GB-LD Handbuch

Sure Vend

Sure Vend 673 Bedienungsanleitung

Cornelius

Cornelius 2 Flavor Post-Mix Cold Coffee Dispenser Quest... Bedienungsanleitung

Nostalgia Electrics

Nostalgia Electrics KEG7000SS Bedienungsanleitung

Servend

Servend SV-200 Bedienungsanleitung

EdgeStar

EdgeStar VBR440 Bedienungsanleitung

Cornelius

Cornelius A.B.S. Unit Bedienungsanleitung

CDS AUTOMATEN

CDS AUTOMATEN ML-16C2-C Bedienungsanleitung

Siemens

Siemens GA 3000 Gebrauchsanweisung

Cornelius

Cornelius FCB V4 Technische Daten

Selbach

Selbach Fruit Juice dispenser Bedienungsanleitung

Taylor

Taylor C302NP Bedienungsanleitung