BUNN® reserves the right to change specifications and product design without notice. Such revisions do not entitle
the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
For most current specifications and other info visit bunn.com.
Last Updated:
06/08/2021
Ultra-2 HP Black Manual Fill -Std Hdl
Patented beverage monitoring technology and reversing auger design ensure
consistent, great tasting frozen beverages
Two large product hoppers hold 3 gallons (11.4L) each to maximize serving
capacity
User interface communicates need for cleaning and maintenance, and provides
simple programming, cleaning and preventive maintenance guides to ensure
reliable operation and performance – minimizing down time and maximizing serving
capacity and profits
LED lighted merchandisers in hopper lids bring high visibility to front- of-house
applications
Standard Dispense Handle
Sanitation listings NSF 18 and NSF 6 (Dairy)
R452A refrigerant reduces impact on environment by lowering Global Warming
Potential (GWP)
Agency:
Specifications Additional Features
34000.0535Product #: R452A
Refrigerant:
None
Autofill: 4" Black LegsLegs:
Black
Finish:
TwoHoppers:
WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Height: 31.9" Width: 16.0" Depth: 24.5"
(81.0cm) (40.6cm) (62.2cm)
Electrical & Capacity
Volts* Amps Watts Cord
Attached Plug Type 8oz cups/hr
236ml cups/hr Input H²O
Temp. Phase # Wires
plus Ground Hertz
120 12 1440 Yes NEMA 5-15P - 60°F (15.5°C) 1 2 50/60
*When a BUNN is machine rated 120/208-240V, 120/208V or 120/240V, the higher voltage is the supply voltage needed to power the machine. The 120V is there to supply power to some components rated 120V in the machine, but it is not the supply voltage
and would not power the machine if the machine is marked with the before mentioned ratings.
Plumbing Requirements CAD Drawings
PSI kPa Fitting Supplied Water Flow Required (GPM)
- - - -
2D Revit KLC
•
