Bush Hog ZERO TURN MOWERS Bedienungsanleitung

BUSH HOG®

ASSEMBLY ● OPERATION ● MAINTENANCE

199 $4.00 99221

ZERO TURN

MOWERS

Operator’s Manual

CONGRATULATIONS!

You have invested in the best implement of its type on the market today.

The care you give your Bush Hog implement will greatly determine your satisfaction

with its performance and its service life. We urge a careful study of this manual to provide

you with a thorough understanding of your new implement before operating, as well as

suggestions for operation and maintenance.

If your manual should become lost or destroyed, Bush Hog will be glad to provide you with

a new copy. Order from Bush Hog, P. O. Box 1039, Selma, Alabama 36702-1039.

As an authorized Bush Hog dealer, we stock genuine Bush Hog parts which are

manufactured with the same precision and skill as our original equipment. Our trained

service personnel are well informed on methods required to service Bush Hog equipment,

and are ready and able to help you.

Should you require additional information or assistance, please contact us.

YOUR AUTHORIZED

BUSH HOG DEALER

BECAUSE BUSH HOG MAINTAINS AN ONGOING

PROGRAM OF PRODUCT IMPROVEMENT, WE

RESERVE THE RIGHT TO MAKE IMPROVEMENTS IN

DESIGN OR CHANGES IN SPECIFICATIONS WITH-

OUT INCURRING ANY OBLIGATION TO INSTALL

THEM ON UNITS PREVIOUSLY SOLD.

BECAUSE OF THE POSSIBILITY THAT SOME

PHOTOGRAPHS IN THIS MANUAL WERE TAKEN OF

PROTOTYPE MODELS, PRODUCTION MODELS MAY

VARY IN SOME DETAIL. IN ADDITION, SOME

PHOTOGRAPHS MAY SHOW SHIELDS REMOVED

FOR PURPOSES OF CLARITY. NEVER OPERATE

THIS IMPLEMENT WITHOUT ALL SHIELDS IN PLACE.

ZERO TURN SERIES

TABLE OF CONTENTS

SECTION PAGE

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . 2

Dealer Preparation Check List . . . . . . . . . 3

Safety Precautions . . . . . . . . . . . . . . . . . . 4

Federal Laws and Regulations. . . . . . . . . 6

I INTRODUCTION AND DESCRIPTION . . 7

Introduction. . . . . . . . . . . . . . . . . . . . . . . . 7

Description . . . . . . . . . . . . . . . . . . . . . . . . 7

Specifications. . . . . . . . . . . . . . . . . . . . . . 8

II OPERATION. . . . . . . . . . . . . . . . . . . . . . . 9

General Safety . . . . . . . . . . . . . . . . . . . . . 9

Pre-Operation Checklist . . . . . . . . . . . . . 19

Operation . . . . . . . . . . . . . . . . . . . . . . . . . 9

Mowing Recommendations . . . . . . . . . . 11

Mower Deck Tilt-Up Procedure . . . . . . . 11

Lowering & Reattaching Deck . . . . . . . . 11

III MAINTENANCE. . . . . . . . . . . . . . . . . . . 13

Maintenance Schedule. . . . . . . . . . . . . . 13

SECTION PAGE

Engine . . . . . . . . . . . . . . . . . . . . . . . . . .14

Battery . . . . . . . . . . . . . . . . . . . . . . . . . .14

Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Mower Blades . . . . . . . . . . . . . . . . . . . . .14

Checking Gearbox Fluid . . . . . . . . . . . . .14

Changing Gearbox Fluid . . . . . . . . . . . .14

Neutral Adjustment . . . . . . . . . . . . . . . . .15

Drive Adjustments . . . . . . . . . . . . . . . . .15

Test Drive Operations . . . . . . . . . . . . . . .15

Leveling The Deck . . . . . . . . . . . . . . . . .15

Deck Belt Adjustment . . . . . . . . . . . . . .16

Deck Belt Replacement . . . . . . . . . . . . .16

Start Up Maintenance . . . . . . . . . . . . . .18

Troubleshooting . . . . . . . . . . . . . . . . . . .19

IV ASSEMBLY . . . . . . . . . . . . . . . . . . . . . .20

Wiring Schematics . . . . . . . . . . . . . . . . .23

Safety Decals . . . . . . . . . . . . . . . . . . . . .25

Torque Specifications . . . . . . . . . . . . . . .27

RETAIL CUSTOMER’S RESPONSIBILITY

UNDER THE BUSH HOG WARRANTY

It is the Retail Customer and/or Operator’s responsibility to read the Operator’s Manual, to

operate, lubricate, maintain and store the product in accordance with all instructions and

safety procedures. Failure of the operator to read the Operator’s Manual is a misuse of this

equipment.

It is the Retail Customer and/or Operator’s responsibility to inspect the product and to have

any part(s) repaired or replaced when continued operation would cause damage or exces-

sive wear to other parts or cause a safety hazard.

It is the Retail Customer’s responsibility to deliver the product to the authorized Bush Hog

Dealer, from whom he purchased it, for service or replacement of defective parts which are

covered by warranty. Repairs to be submitted for warranty consideration must be made with-

in forty-five (45) days of failure.

It is the Retail Customer’s responsibility for any cost incurred by the Dealer for traveling to or

hauling of the product for the purpose of performing a warranty obligation or inspection.

DANGER: Indicates an imminently

hazardous situation which, if not avoid-

ed, will result in death or serious injury.

This signal word is to be limited to the

most extreme situations.

WARNING: Indicates a potentially

hazardous situation which, if not

avoided, could result in death or

serious injury.

CAUTION: Indicates a potentially haz-

ardous situation which, if not avoided,

may result in minor or moderate injury. It

may also be used to alert against

unsafe practices.

BUSH HOG®

ZERO TURN MOWER LIMITED WARRANTY

✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯

Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an

authorized Bush Hog dealer, that the equipment be free from defects in material and workmanship for a period

of two (2) years from date of retail sale. The obligation of Bush Hog to the purchaser under this warranty is lim-

ited to the repair or replacement of defective parts.

Replacement or repair parts installed in the equipment covered by this limited warranty are warranted

for ninety (90) days from the date of purchase of such part or to the expiration of the applicable new equip-

ment warranty period, whichever occurs later. Warranted parts shall be provided at no cost to the user at an

authorized Bush Hog dealer during regular working hours. Bush Hog reserves the right to inspect any equip-

ment or parts which are claimed to have been defective in material or workmanship.

DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES

Bush Hog’s obligation under this limited warranty, to the extent allowed by law, is in lieu of all war-

ranties, implied or expressed, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE and any liability for incidental and consequential damages with respect to

the sale or use of the items warranted. Such incidental and consequential damages shall include but not be

limited to: transportation charges other than normal freight charges; cost of installation other than cost

approved by Bush Hog; duty; taxes; charges for normal service or adjustment; loss of crops or any other loss of

income; rental of substitute equipment, expenses due to loss, damage, detention or delay in the delivery of

equipment or parts resulting from acts beyond the control of Bush Hog.

THIS LIMITED WARRANTY SHALL NOT APPLY:

1. To transportation to and from dealership or service calls made by dealers, ie, driving time, towing,

pickup and delivery.

2. To vendor items which carry their own warranties, such as engines, batteries, tires, and tubes.

3. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident.

4. If parts not made or supplied by Bush Hog have been used in connection with the unit, if, in the sole judge-

ment of Bush Hog such use affects its performance, stability or reliability.

5. If the unit has been altered or repaired outside of an authorized Bush Hog dealership in a manner

which, in the sole judgement of Bush Hog, affects its performance, stability or reliability.

6. To normal maintenance service and normal replacement items such as gearbox lubricant, hydraulic fluid,

worn blades, or to normal deterioration of such things as belts and exterior finish due to use or

exposure.

7. To expendable or wear items such as teeth, chains, sprockets, belts, springs and any other items that in the

company’s sole judgement is a wear item.

NO EMPLOYEE OR REPRESENTATIVE OF BUSH HOG IS AUTHORIZED TO CHANGE THIS LIM-

ITED WARRANTY IN ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE IS MADE

IN WRITING AND SIGNED BY BUSH HOG’S SERVICE MANAGER, POST OFFICE BOX 1039, SELMA,

ALABAMA 36702-1039.

✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯✯

Record the model number, serial number and date

purchased. This information will be helpful to your

dealer if parts or service are required.

MAKE CERTAIN THE WARRANTY REGISTRATION

CARD HAS BEEN FILED WITH BUSH HOG/

SELMA, ALABAMA

MODEL NUMBER

SERIAL NUMBER

DATE OF RETAIL SALE

DEALER PREPARATION CHECK LIST

ZERO TURN

BEFORE DELIVERING MACHINE — The following check list should be completed.

Use the Operator’s Manual as a guide.

❒1. Engine has been serviced.

❒2. Battery fluid level is checked.

❒3. Low oil pressure warning buzzer checked for operation.

❒4. Kill switches checked for operation.

❒5. Assembly completed.

❒6. Gearbox filled with oil.

❒7. All fittings lubricated.

❒8. Hydraulic Reservoir filled with oil.

❒9. All shields in place and in good condition.

❒10. All fasteners torqued to specifications given in Torque Chart.

❒11. All decals in place and readable. (See decal page.)

❒12. Overall condition good (i.e. paint, welds)

❒13. Parking brake checked and adjusted, if necessary.

❒14. Steering checked and adjusted, if necessary.

❒15. Check tire pressure.

❒16. Operators manual has been delivered to owner and he has been instructed

on the safe and proper use of the cutter.

Dealer’s Signature

Purchaser’s Signature

THIS CHECKLIST TO REMAIN IN OWNER’S MANUAL

It is the responsibility of the dealer to complete the procedures listed

above before delivery of this implement to the customer.

IMPORTANT SAFETY PRECAUTIONS

This symbol is used to call attention to safe-

ty precautions that should be followed by

the operator to avoid accidents. When you

see this symbol, carefully read the message

that follows and heed its advice. Failure to

comply with safety precautions could result

in serious bodily injury.

In addition to the design and configuration of equipment, hazard control and accident prevention are depen-

dent upon the awareness, concern, prudence and proper training of personnel in the operation, transport,

maintenance and storage of equipment. Lack of attention to safety can result in accident, personal injury,

reduction of efficiency and worst of all—loss of life. Watch for safety hazards and correct deficiencies prompt-

ly. Use the following safety precautions as a general guide to safe operations when using this machine.

Additional safety precautions are used throughout this manual for specific operating and maintenance proce-

dures. Read this manual and review the safety precautions often until you know the limitations.

ACCIDENT PATTERNS TO AVOID

1. CONTACT WITH THE ROTATING BLADE - This accident usually happens when the operator is clear

ing the discharge chute of grass, (especially when the grass is wet), or when the operator adjusts the

machine without turning it off and waiting for the blades to completely stop.

2. PROPELLED OBJECTS - Sticks, rocks, wires, and other objects can be propelled out through the dis-

charge chute or from under the mower housing. Bystanders are particularly vulnerable.

3. GRASS CATCHER OR GUARD - The mower shall not be operated without either the entire grass catch-

er or guard in place.

4. OVERTURNING - This happens when riding mowers are used on steep slopes, embankments or hills.

The operator in these cases can come in contact with blades or sustain injuries during a fall.

5. MOWER RUNNING OVER THE VICTIM - This usually happens when a riding mower is driven in reverse.

The accident victims are most often young children whom, unseen by the operator of the mower, were in

the area being mowed.

WE SHARE YOUR DESIRE TO PROTECT YOURSELF, YOUR FAMILY, YOUR FRIEND AND YOUR

NEIGHBORS FROM ACCIDENTAL INJURY. OBSERVING AND ENFORCING THE FOLLOWING GUIDE

LINES WILL HELP TO INSURE THE SAFETY OF EVERYONE.

SAFETY INSTRUCTIONS AND RECOMMENDATIONS

1. PEOPLE WHO OPERATE, SERVICE, OR ARE OTHERWISE ASSOCIATED with the Zero Turning

Radius Mower should be trained in its proper use and warned of its dangers. Before operating, adjusting,

or servicing the Zero Turning Radius Mower they should read and understand this entire manual and the

owner’s engine manual.

2. AVOID CONTACT WITH MOVING PARTS. Keep hands and feet from under mowing deck and away

from blades at all times. Turn engine (motor) off if you must unclog the chute.

3. AVOID HILLS AND SLOPES. Use extreme caution when mowing up or down slopes. NEVER mow

across the face of a slope. If a slope must be ascended, drive up the slope; back down when descend-

ing. Reduce speed and use caution to start, stop and maneuver. To prevent loss of control on a slope,

avoid sharp turns, sudden changes in direction, and sudden stops and starts.

4. DISENGAGE POWER TO MOWER BEFORE BACKING UP. Do not mow in reverse unless absolutely

necessary and then only after turning around and observing the entire area behind the mower. Go slowly.

Most “running over victim” accidents occur in reverse.

5. BEGINNING OPERATORS SHOULD LEARN HOW TO STEER the Zero Turning Radius Mower before

attempting to mow. Start with slow engine speed and drive without the blades engaged in open area until

comfortable with the machine.

6. KNOW HOW TO STOP QUICKLY. Know the location and operation of every control, especially how to brake and

how to disengage the mower blades.

SAFETY CONTINUED

7. DO NOT MOVE THE CONTROL LEVERS from forward position to reverse position rapidly. The speed

and/or direction of travel is affected instantly by movement of the Control Levers.

8. DO NOT ALLOW CHILDREN TO OPERATE MOWER. Do not allow others who have not had instruc-

tions to operate mower.

9. ALWAYS TURN ENGINE OFF AND REMOVE KEY before leaving mower to prevent children and

inexperienced operators from starting the engine. Never leave the mower unattended with engine run

ning. Always wait for all moving parts and all sounds to stop before leaving operator’s seat. Always set

the parking brake on an unattended mower.

10. WEAR STURDY, ROUGH-SOLED WORK SHOES AND CLOSE-FITTING SLACKS AND SHIRTS.

Never operate mower in bare feet, sandals or sneakers.

11. WEAR PERSONAL PROTECTIVE EQUIPMENT such as, but not limitied to, protection for eyes, ears, feet, hands

and head when operating or repairing equipment. Do not wear loose clothing or jewelry that may catch on equip-

ment moving parts.

12. NEVER CARRY PASSENGERS.

13. KNOW THE AREA YOU ARE TO MOW. Watch for hidden dangers such as rocks, roots, sticks, holes,

bumps, and drop-offs, etc. Before mowing, pick up all debris in area to be mowed. Sharp and hard

objects can be propelled at a high speed and can act like shrapnel. Walk through tall grass BEFORE

MOWING to make sure there are no hidden dangers. Mow higher than desired in tall grass to expose

any hidden objects and/or obstacles, clean the area, and then mow to the desired height.

14. BE SURE THE AREA IS CLEAR of other people before mowing. Stop machine if anyone enters the area.

15. NEVER REFUEL A MOWER INDOORS. Allow the engine time to cool before refueling. Unseen vapors may be

ignited by a spark. Always clean up spilled gasoline. Never run the engine indoors in a garage

or any other closed building. Allow engine to cool before storing in any enclosure. The engine exhaust

and gasoline fumes are dangerous.

16. NEVER REMOVE THE FUEL CAP or add gasoline to a running or hot engine or an

engine that has not been allowed to cool for several minutes after running. Always make sure the gas

cap is in place.

17. DO NOT SMOKE AROUND THE MOWER or the gasoline storage container. Gasoline fumes can easi-

ly ignite.

18. KEEP GASOLINE IN A WELL-VENTILATED AREA away from your living quarters and in tightly

capped safety cans. Never store mower with gasoline in the tank inside a building where fumes may

reach open flame or spark.

19. DISENGAGE BLADE, STOP ENGINE, ENGAGE PARKING BRAKE AND REMOVE IGNITION KEY before any ser-

vicing. Be sure all moving parts and all sounds have stopped. Let engine cool and disconnect the spark plugs so the

engine cannot start by accident. A SLIGHT ROTATION OF THE BLADES COULD START THE ENGINE.

20. KEEP ALL NUTS, BOLTS, AND SCREWS TIGHT to be sure equipment is in safe working condition, espe-

cially blade bolts.

21. VEHICLE SHOULD BE STOPPED AND INSPECTED FOR DAMAGE after striking a foreign object and

the damage should be repaired before restarting and operating the equipment. Stop immediately and

check for damage or loose parts if mower should start vibrating.

22. DISENGAGE BLADES BEFORE DRIVING ACROSS WALKS or projecting objects.

23. KEEP SAFETY DEVICES AND GUARDS IN PLACE. If any of the safety switches become inoperable,

have them repaired immediately.

24. DO NOT STEP OR STAND ON THE MOWER HOUSING. Step or stand only on the tread areas on the deck.

25. WATCH OUT FOR TRAFFIC near roadways and when crossing roads.

26. THIS MACHINE IS NOT MEANT FOR HIGHWAY OR STREET USE. It is not a recreational vehicle and it should not

be operated as such.

27. DO NOT USE MOWER WHEN GRASS IS WET OR SLIPPERY.

28. MOW ONLY DURING DAYLIGHT.

29. ALWAYS DISENGAGE THE MOWER BLADE CLUTCH when transporting.

30. If your tractor is equipped with ROPS (Roll-Over Protection Structure), you must wear your seat belt.

IMPORTANT FEDERAL LAWS AND REGULATIONS* CONCERNING

EMPLOYERS, EMPLOYEES AND OPERATIONS.

*(This section is intended to explain in broad terms the concept and effect of the following federal laws and

regulations. It is not intended as a legal interpretation of the laws and should not be considered as such).

U.S. Public Law 91-596 (The Williams-Steiger Occupational and Health Act of 1970) OSHA

This Act Seeks:

“...to assure so far as possible every working man and woman in the nation safe and healthful working

conditions and to preserve our human resources...”

DUTIES

Sec. 5 (a) Each employer—

(1) shall furnish to each of his employees employment and a place of employment

which are free from recognized hazards that are causing or are likely to cause

death or serious physical harm to his employees;

(2) shall comply with occupational safety and health standards promulgated under

this Act.

(b) Each employee shall comply with occupational safety and health standards

and all rules, regulations and orders issued pursuant to this Act which are

applicable to his own actions and conduct.

OSHA Regulations

Current OSHA regulations state in part: “At the time of initial assignment and at least annually thereafter, the

employer shall instruct every employee in the safe operation and servicing of all equipment with which the

employee is, or will be involved.” These will include (but are not limited to) instructions to:

Keep all guards in place when the machine is in operation;

Permit no riders on equipment;

Stop engine, disconnect the power source, and wait for all machine movement to stop before

servicing, adjusting, cleaning or unclogging the equipment, except where the machine must be

running to be properly serviced or maintained, in which case the employer shall instruct employees

as to all steps and procedures which are necessary to safely service or maintain the equipment.

Make sure everyone is clear of machinery before starting the engine, engaging power, or operating

the machine.

Child Labor Under 16 Years Old

Some regulations specify that no one under the age of 16 may operate power machinery. It is your

responsibility to know what these regulations are in your own area or situation. (Refer to U.S. Dept. of

Labor, Employment Standard Administration, Wage & Home Division, Child Labor Bulletin #102.)

INTRODUCTION

We are pleased to have you as a Bush Hog cus-

tomer. Your Bush Hog Zero Turn Mower has been

carefully designed to give maximum service with

minimum down time. This manual is provided to give

you the necessary operating and maintenance

instructions for keeping your mower in top operating

condition. Please read this manual thoroughly.

Understand what each control is for and how to use

it. Observe all safety precautions decaled on the

machine and noted throughout the manual for safe

operation of implement. If any assistance or addition-

al information is needed, contact your authorized

Bush Hog dealer. Optional equipment such as Roll

Over Protection Systems, Seat Belts or Front Blade

Assemblies are covered in their individual instruc-

tions, which come with the kits.

NOTE:

All references made to right, left, front, rear, top or bot-

tom is as viewed facing the direction of forward travel

with implement properly attached to power unit.

DESCRIPTION

The Zero Turn is intended for use on large lawns and

other maintained areas where a smooth, even cut is

The mower deck is driven by a power take-off

(PTO) shaft from the engine. An electrically con-

trolled clutch is used to engage/disengage the PTO.

The mower attachment is available in three sizes;

48”, 54”, and 60” cut. The mower has three uplift

blades, driven by the input gearbox through a single

V-belt controlled by a spring loaded tensioner.

desired and superior maneuverability is needed. The

tractor unit consists of either an 18 hp Kohler, 22 hp

Kohler, 25 hp Kohler, or 22 hp water cooled

Kawasaki, two cylinder engine, and a power take-off

(PTO) shaft. The engine has a pressurized oil lubri-

cation system with spin-on type filter, fused electron-

ic ignition, electric start and a 5 gallon fuel tank.

Two hydrostatic pumps and two wheel motors are

used for propelling and steering. The pumps are belt

driven by the engine output shaft. One lever for each

drive controls both speed and direction. This inde-

pendent control of each drive wheel coupled with

continuously variable speed selection gives the Zero

Turn mower exceptional maneuverability.

SECTION I

INTRODUCTION AND DESCRIPTION

CONTROLS

SAFETY INTERLOCK SYSTEM

Your Bush Hog Zero Turn is equipped with a Safety

Interlock System that is designed to help prevent

possible serious injuries. Understanding and main-

taining this system is vital, for safe operation.

To Start Engine:

1. Blades (PTO) must be disengaged.

2. Control levers in neutral (swung out).

3. Parking brake on.

4. Operator in seat.

The Engine Will Kill If:

1. The operator leaves the seat with:

a. The control levers out of neutral (swung in).

b. The blades are engaged.

c. The parking brake is off.

d. All of the above.

2. The park brake is on before the control levers

are in neutral (swung out).

DO NOT OPERATE MOWER IF SAFETY SWITCH-

ES ARE NOT OPERATING PROPERLY.

CONTROL LOCATIONS

①Ignition Key - On right hand control console.

②Engine Throttle - On right hand control console.

③Two Steering/Speed Control Levers - In front of

seat at side. (Not shown below)

④PTO Clutch Switch - On right hand control

console.

⑤Parking Brake Lever - On left hand control con-

sole. (Not shown below)

⑥Blade Height Adjust Lever - Right side of deck. (Not

shown below)

⑦Choke - On right hand control console.

⑧Hydrostatic Pump Bypass Valve - Right sides of

pumps. (Not shown below)

Light Switch - On right hand control console.

➉ Hour Meter - On right hand control console.

Warning Light - On right hand control console.

TRACTOR SPECIFICATIONS

Width - All Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49”

Height - Kohler Models (Top of seat back) . . . . . . . . . 46”

Kawasaki (Top of seat back) . . . . . . . . . . . . . 46”

All Models with ROPS . . . . . . . . . . . . . . . . . . 72”

Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . Approx. 5 gallons

Hydrostatic Fluid Reservoir . . . . . . . . . Approx. 3 gallons

Hydrostatic Pumps- All Models . . (2) Hydro-Gear pumps

Engine - Zero Turn 18 18 h.p. Kohler Command

Zero Turn 22 22 h.p. Kohler Command

Zero Turn 25 25 h.p. Kohler Command

Zero Turn 22W 22 h.p. Water Cooled Kawasaki

Tires - All Models - Front . . . . . . . . . . . . . . . . 410/350 x 4

Drive . . . . . . . . . Turf 20 - 10.00 x 10

Bar 21 - 11.00 x 10

Knobby 20 - 11.00 x 10

Rear (Single Wheel) . . . 13 - 6.50 x 6

(Dual Wheels) . . . . 13 - 6.50 x 6

DECK SPECIFICATIONS

ITEM D 48-1 D54-1 D 60-1

Cutting width 48” 54” 60”

Cutting Heigh ------------------ 1.00” to 5.00”-------------

Blades 17” 19” 21”

Overall width

including chute 63-1/2” 66-1/2” 73-1/2”

Material thickness - skirt -------------7 GA.---------------

- deck -----------10 GA.--------------

Reinforcement plate ------------------7 GA.---------------

Spindle bearings ----------------------25 mm--------------

①② ④ ⑦

WARNING

DO NOT OPERATE MACHINE UNLESS

INTERLOCK SYSTEM FUNCTIONS PROP-

ERLY. FAILURE TO HEED THIS WARNING

MAY RESULT IN SERIOUS INJURY, DEATH

OR EQUIPMENT DAMAGE.

⑨

11 ➉

Inhaltsverzeichnis

Andere Bush Hog Rasenmäher Handbücher

Bush Hog

Bush Hog 2814 Bedienungsanleitung

Bush Hog

Bush Hog 50045565 Bedienungsanleitung

Bush Hog

Bush Hog HDZ2661VG Bedienungsanleitung

Bush Hog

Bush Hog Tough SQ84T SQUealer Bedienungsanleitung

Bush Hog

Bush Hog HDTH5 Bedienungsanleitung

Bush Hog

Bush Hog HDTH7 Bedienungsanleitung

Bush Hog

Bush Hog MID MOUNT ZERO TURN SERIES Bedienungsanleitung

Bush Hog

Bush Hog FTH 600 Bedienungsanleitung

Bush Hog

Bush Hog HM2008 Bedienungsanleitung

Bush Hog

Bush Hog RDTH SERIES RDTH 60 Gebrauchs- und Pflegehandbuch

Bush Hog

Bush Hog Zero Turn Professional Series Bedienungsanleitung

Bush Hog

Bush Hog BH400 Series Bedienungsanleitung

Bush Hog

Bush Hog DHM Series Bedienungsanleitung

Bush Hog

Bush Hog HDTH8 Bedienungsanleitung

Bush Hog

Bush Hog BBC 48 Bedienungsanleitung

Bush Hog

Bush Hog ATH 900 Bedienungsanleitung

Bush Hog

Bush Hog HDZ-3 Series Bedienungsanleitung

Bush Hog

Bush Hog 3510R Bedienungsanleitung

Bush Hog

Bush Hog HDE-4 Series Bedienungsanleitung

Bush Hog

Bush Hog HDZ-4 Series Bedienungsanleitung

Bush Hog

Bush Hog RDTH84 Bedienungsanleitung

Bush Hog

Bush Hog BH200 Series Bedienungsanleitung

Bush Hog

Bush Hog estate series Bedienungsanleitung

Bush Hog

Bush Hog RMB 1445 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung