Bushnell LYNX 260401 Bedienungsanleitung

06-14

Model: 260401

JUMELLES POUR VISION NOCTURNE

PRISMÁTICOS PARA VISIÓN NOCTURNA

NACHTSICHT-FERNGLAS

BINOCOLO PER VISIONE NOTTURNA

NIGHT VISION BINOCULARS

ENGLISH 4

FRANÇAIS 12

ESPAÑOL 20

DEUTSCH 28

ITALIANO 36

ENGLISH

SPECIFICATIONS

Magnification: 2.5 X

Objective Size: 40 mm

Vertical Resolution: 36 lines/mm

Viewing Range* 4–600 ft. / 1.2-183 m

Range of Built-In Infrared Illuminator Up to 90 yards

Field of View: 94 feet at 100 yards / 31 meters at 100 meters

Battery Type: AAA (2)

Operating Time: Up to 70 hours without IR /20 hours with IR illuminator on

Temperature Range: -22 to 104 º F / -30 to 40 º C

Eyepiece Adjustment: +/- 4 diopter

Length: 6.5 inches / 165 mm

Width: 6.3 inches / 160 mm

Height: 3.0 inches / 76 mm

Weight: 18.0 oz / 510 g

* Maximum distance at which a human figure can be recognized under ideal viewing conditions;

defined as clear conditions (no fog, dust, etc.) under the light of 1/4 moon.

Congratulations on the purchase of your Bushnell Night Vision Product. Bushnell Night Vision products are comprised of high quality

image intensifier tubes and optics. Bushnell Night Vision products amplify existing light, allowing you to see in dark conditions too

dark for the naked eye.

HOW NIGHT VISION WORKS

Bushnell Night Vision products collect and amplify existing light through the objective lens, which is then focused on the image

intensifier. Inside the intensifier, a photocathode is “excited” by the light and converts the photon energy into electrons. These

electrons accelerate across an electrostatic field inside the intensifier and strike a phosphor screen (like a green monochrome TV

screen) which emits an image that you can see. It is the acceleration of electrons, which provides gain and enhances the image.

This is a Generation I (analog) night vision device.

Your Night Vision device is ideal for a variety of professional and recreational uses including the following:

• Wildlife Observation

• Astronomy

• Boating / Marine Use

• Police / Law Enforcement

• Search and Rescue

• Security

• Property Management

CAUTION: As with any analog night vision device based on light intensifier tube technology, DO NOT REMOVE THE LENS CAPS AND

OPERATE THE DEVICE IN BRIGHT LIGHT (DAYLIGHT). Turning on the device's power with the lens covers removed in brightly lit

environments (outdoors or indoors) can potentially damage your night vision unit, beyond repair if the light level is very high and/

or exposure time is extended. The objective lens caps have a pinhole opening to admit a small amount of light for testing purposes.

GETTING STARTED

Installing Batteries

This device operates on two AAA batteries (alkaline or lithium). To install, rotate

the battery cover in a clockwise direction, to the "open" position as shown in

the lower right photo. Insert the batteries into the battery compartment so that

the positive (+) and negative (-) terminals of the batteries facing you match the

markings above the OPEN arrow ("-" on left side, "+" on right side). Replace the

battery cover carefully, rotating it counter-clockwise back to the closed position.

Use and Testing

Make sure the batteries have been installed according to the instructions above.

If you wish to test your night vision device in a lighted area, be sure the

objective lens caps are covering both objective lenses prior to pressing the

“ON” button. The objective lens caps have a pinhole opening to admit a small

amount of light for testing purposes.

If testing or using the device in the dark, remove the objective lens caps and

activate the device by pushing the “ON” button. The power indicator LED above

the battery cover will light.

To focus, select an object at the approximate distance for the area that you

intend to view. Adjust each eyepiece diopter setting until the image appears the

sharpest for your eyesight. After your initial diopter setting, the front (objective)

lenses are now utilized for focusing: adjust the front lenses clockwise when you

need to focus on closer objects, counter clockwise for more distant objects. If

you are unable to focus on very close objects, the eyepieces may then be used

as well for fine adjustments only.

Battery Cover

Closed Position

Battery Cover

Open Position

Power Indicator

POWER BUTTONIR BUTTON

IR ILLUMINATOR

EYEPIECE

DIOPTER

OBJECTIVE LENS

(MAIN) FOCUS

Using the Infrared Illuminator

Your Night Vision device offers a Built-In Infrared Illuminator. This allows you to see in complete darkness where no ambient

light source, such as moonlight, is available. If the subject is to be viewed in a completely dark area, activate the infrared

illuminator by pressing the IR button. In brighter areas turn off the IR illuminator by pressing it again to maximise battery life.

CAUTION: This device can be used in extreme cold weather. However, when the unit is brought back into a warm environment, you

must wait approximately 5 hours to allow it to adjust to the change in temperature before using the unit again. If this is not done,

damage could occur due to condensation that may have accumulated on the internal circuitry of the unit.

Spots In The Image

You may see spots in the image. These vary from device to device and are very small cosmetic blemishes inside the intensifier tubes.

These are normal for "Gen 1" analog technology Night Vision devices and are NOT a defect.

TROUBLESHOOTING

Device will not turn on.

Check that the batteries are installed properly. Replace the batteries with new ones. Check the battery contacts to ensure they are

clean and free of corrosion. If the power indicator LED is lit, make sure the objective covers are removed before viewing in dark

conditions.

Image is not focused.

Adjust the Eyepiece diopter rings for your vision. Use the Objective Lens focusing controls to adjust for subjects at different distances.

If still no improvement, clean the lenses; they may be foggy or dusty.

Visibility decreases or disappears.

Bright light sources such as headlights may cause visibility to degrade or disappear completely. Turn the Power OFF and turn

the binocular away from the light source. The unit will restore itself in 1 or 2 minutes. Conditions such as fog or extremely dark

environments will decrease visibility.

Image flashes.

The image may flash when used in a bright environment. It may also flash during the first few seconds of use in dark environments.

CARE AND MAINTENANCE

Your Bushnell Night Vision device was designed to provide many years of reliable service.

To ensure that you get the most enjoyment out of your Night Vision device, always obey the following warning and precautions:

• Do not point this device toward any light source greater than 1 lux such as car headlights, for an extended period of time.

• This device utilizes an internal flash protection system which minimizes potential damage, but long-term exposure to bright lights

can damage the unit. Any such damage may void your warranty.

• This device was designed to be self-contained. Do not open the body of the device or otherwise attempt to service this device.

• Always store the device in a dry, well-ventilated room.

• Remove the batteries if the device is to be stored for longer than 2 months.

• Keep the device away from any heating and air conditioning vents or other heating devices, direct sunlight, and moisture.

• Avoid dropping or otherwise shocking the unit. Although designed for rugged outdoor use, this device incorporates a sophisticated

optical system, which could be damaged in extreme cases of misuse.

• The device is weather-resistant, not waterproof, and should never be submerged or subjected to a direct stream of water.

• Clean the optical lenses with professional lens cleaning supplies.

• Clean the exterior of the device with a soft clean cloth.

Class 1 LED product per IEC 60825-1/nov 1993, appendix EN 60825-1A11/oct1996

ONE YEAR LIMITED WARRANTY

Your Bushnell®product is warranted to be free of defects in materials and workmanship for one year after the date of

purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that

you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling,

installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.

Any return made under this warranty must be accompanied by the items listed below:

1) A check/money order in the amount of $10.00 to cover the cost of postage and handling

2) Name and address for product return

3) An explanation of the defect

4) Proof of Date Purchased

5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage

prepaid to the address listed below:

IN U.S.A. Send To: IN CANADA Send To:

Bushnell Outdoor Products Bushnell Outdoor Products

Attn.: Repairs Attn.: Repairs

9200 Cody 140 Great Gulf Drive, Unit # B

Overland Park, Kansas 66214 Vaughan, Ontario L4K 5W5

For products purchased outside the United States or Canada please contact your local dealer for applicable warranty

information. In Europe you may also contact Bushnell at: Bushnell Germany GmbH

European Service Centre

Mathias-Brüggen-Str. 80

D-50827 Köln

GERMANY

Tél: +49 221 995568-0

Fax: +49 221 995568-20

This warranty gives you specific legal rights.

You may have other rights which vary from country to country.

Inhaltsverzeichnis

Sprachen:

Andere Bushnell Fernglas Handbücher

Bushnell

Bushnell Night Vision 26-2036 Bedienungsanleitung

Bushnell

Bushnell Compact Instant Replay 11-8323 Bedienungsanleitung

Bushnell

Bushnell 260650 Bedienungsanleitung

Bushnell

Bushnell 13-1250 Bedienungsanleitung

Bushnell

Bushnell Equinox Z 260501 Bedienungsanleitung

Bushnell

Bushnell MARINE Binoculars Bedienungsanleitung

Bushnell

Bushnell FUSION X Bedienungsanleitung

Bushnell

Bushnell Cabelas 20-3125 Bedienungsanleitung

Bushnell

Bushnell ImageView 11-8200 Bedienungsanleitung

Bushnell

Bushnell IMAGE VIEW 111024 Bedienungsanleitung

Bushnell

Bushnell 161001CM Bedienungsanleitung

Bushnell

Bushnell trophy XLT Bedienungsanleitung

Bushnell

Bushnell 62-0726 Bedienungsanleitung

Bushnell

Bushnell PowerView 14-1042 Bedienungsanleitung

Bushnell

Bushnell 11 0834 Bedienungsanleitung

Bushnell

Bushnell Night Vision 26-0400 Bedienungsanleitung

Bushnell

Bushnell ImageView 118330 Bedienungsanleitung

Bushnell

Bushnell Image View 111026 Bedienungsanleitung

Bushnell

Bushnell Marine 13-7507 Bedienungsanleitung

Bushnell

Bushnell Image View 11-8321 Bedienungsanleitung

Bushnell

Bushnell ImageView 18-0832 Bedienungsanleitung

Bushnell

Bushnell 23-2811 Bedienungsanleitung

Bushnell

Bushnell ImageView 118328 Bedienungsanleitung

Bushnell

Bushnell 137570 Bedienungsanleitung

Beliebte Fernglas Handbücher anderer Marken

Celestron

Celestron VistaPix 72218 Bedienungsanleitung

Levenhuk

Levenhuk Atom Digital DNM200 Bedienungsanleitung

ATN

ATN PS-15 Bedienungsanleitung

Bresser

Bresser TOPAS 7x50 Bedienungsanleitung

Berger & Schroter

Berger & Schroter LN-G3-B50 Bedienungsanleitung

Leica

Leica geovid 8x42 HD-R Bedienungsanleitung

Noblex

Noblex NF 8 x 42 inception Bedienungsanleitung

Newcon Optik

Newcon Optik AN Series Bedienungsanleitung

PHOTONIS

PHOTONIS VYPER Bedienungsanleitung

ATN

ATN 6015-WPT Bedienungsanleitung

Famous Trails

Famous Trails ViewCatcher DCB 822 Bedienungsanleitung

AGM

AGM EXPLORATOR FSB50-640 Bedienungsanleitung

Opticron

Opticron Marine-3 7x50 BIF.GA Installationsanleitung

Kayoba

Kayoba 009129 Bedienungsanleitung

Vixen

Vixen ARENA Series Bedienungsanleitung

MAGINON

MAGINON NVB 60 Bedienungsanleitung

Leica

Leica Geovid 56 Bedienungsanleitung

Leica

Leica GEOVID PRO Bedienungsanleitung