Bushnell NIGHT WATCH 263230CL Bedienungsanleitung

INSTRUCTION

MANUAL Model #: 263230CL

Lit. #: 98-1588/03-10

NIGHT WATCH

3 x32

DIGITAL NIGHT VISION

w/ Color LCD

412 13

PARTS AND CONTROLS REFERENCE

Red "IR On" LED

Green "Power On" LED

Orange "Auto O" LED

Indicator LEDs

detail

Congratulations on the purchase of your Bushnell® Night Watch Digital Color Night Vision. Comprised of high quality electronics

and optics, this Bushnell Night Watch unit is a hand-held digital night vision viewing system that utilizes a low-light charge coupled

device (CCD) sensor providing images comparable to generation 2 & 3 resolution. Day and Night time images are magnified and

displayed on a Color LCD micro display screen, which provides a color image when ambient light conditions are high enough,

and a desaturated color or neutral, monochrome image (not the typical "green screen" night vision) under lower ambient

light conditions. The Digital Color Night Vision also contains an RCA video output port which allows live transmission to video

camcorders, computer lap tops / monitors, and television screens.

HOW DIGITAL NIGHT VISION WORKS

Bushnell Digital Night Vision products collect existing light through the objective lens. The light is then processed through a highly

sensitive CCD sensor and transferred to the micro liquid crystal display (color LCD). Images viewed on the LCD are magnified 3

times. An infrared illuminator provides a light source to enable viewing in total darkness.

The Bushnell Night Watch Digital Color Night Vision unit is ideal for camping, caving, scouting, maritime navigation, and observing

wildlife under the veil of darkness, patrolling warehouses and similar surveillance operations where light is scarce.

OPERATING INSRUCTIONS

1. Slide the battery compartment door (2) open in the direction of the white arrow. Insert two CR123 batteries (3v lithium, not

included) into the battery compartment. Be sure to observe the correct battery polarity, as shown on the left. The "+" end of the

top battery should be facing out (towards the battery door), and the "-" end of the lower battery should be facing out.

2. Remove the front lens cover. When finished using the unit, replace the cover to protect the objective lens (1) and IR light (7).

3. Press the ON/OFF switch (3) to power the device on. A green LED light (4) indicates that the power is on. To extend battery life, the

unit will normally turn off automatically after 2 minutes (if no buttons are pressed). To cancel this auto-off function, briefly press

and release the IR switch (8) on the top of the unit. The power will then remain on until you turn it off manually with the ON/OFF

switch. The orange light on the lower half of the power indicator light (4) will glow if the unit is in auto-off mode (default), and will

turn off if you cancel the auto-off function. If the batteries become weak, the green power indicator LED will blink.

4. View through the eyepiece (5) and select an object to focus on.

5. To focus the image, first rotate the eyepiece rubber ring (5) until the edges of the LCD display appear sharp to your vision. Next,

rotate the objective lens focus wheel (6) until the object is in focus and the view is clearest. At this point, the display focus (eyepiece

ring) is set for your individual eyesight and will not require further adjustment when viewing objects at different distances. When

changing the viewing distance, simply rotate the main focus wheel (6) until the image is in focus.

6. The Digital Night Vision has a light level sensor on the front of the unit (14) which detects low light conditions and automatically

turns on an infrared illuminator (7) to improve image quality. When the IR light is on, this is indicated by the red LED (9) above the

power indicator. You can also turn the IR illuminator on manually anytime, even if ambient light levels are high, by pressing and

holding the IR switch (8) for a at least two seconds (when you release the switch, you will see the red IR illuminator LED indicator,

confirming the IR illuminator is on now).

7. To increase the brightness of the IR illuminator, press the "+" key (10). This can be used to extend your viewing distance. To decrease

the brightness of the IR illuminator, press the "-" key. This can be helpful in improving the LCD display viewing quality (by avoiding

"wash out") in very low light conditions or complete darkness.

8. While moving from viewing one object to another object, it might be necessary to rotate the objective lens focus wheel and adjust

the IR illuminator brightness in order to achieve the best image quality.

9. The Digital Night Vision includes a video output ("TV Out") jack (13). This port allows one to transmit images to an external video

monitor or video recorder. Plug the output video cable into the video output jack ("TV Out"). When the Digital Color Night Vision

is connected to compatible (NTSC) video equipment, the image produced by the unit can be monitored and/or recorded.

10. The Digital Color Night Vision also includes a 6 volt auxiliary power input jack (12). To connect the Digital Night Vision to a

household outlet, use the included 6 volt AC power adapter. Note that this feature is not intended to recharge batteries of any type,

and should not be used for that purpose. It simply provides an option for an external power source.

NOTE: When the batteries are inserted and the external power source is turned on, the device operates on the external power

source. If you unplug the external power source, and you want to use the battery source, you have to press the ON button (3) to

make the device operate.

NOTE: A standard tripod mounting socket is provided on the bottom of the unit. Remove the round rubber plug near the center of

the bottom face of the unit and set it aside.

TROUBLESHOOTING

Unit will not turn on

1. Check that the batteries are installed correctly (2). If the batteries are installed correctly and the batteries are good, then the green

LED indicator light should be on steadily.

2. Check that the power button (3) has been pressed.

Power does not stay on

1. Replace the batteries when they become weak.

2. The unit normally turns off automatically after 2 minutes to conserve battery power. To defeat this, briefly press the IR switch.

Image is not focused.

1. Adjust the objective focus wheel (6) and eyepiece display focus (5).

2. Make sure you are not too close to the object you are viewing.

CARE AND MAINTENANCE

Your Bushnell Digital Night Vision device was designed to provide many years of reliable service. To ensure that you get the most

enjoyment out of your Digital Night Vision device, always obey the following warnings and precautions.

• Donotopenthebodyofthedeviceorotherwiseattempttoservicethisdevice.

• Alwaysstorethedeviceinadry,wellventilatedroom.

• Keepthedeviceawayfromanyheatingandairconditioningventsorotherheatingdevices,directsunlight,andmoisture.

• Avoiddroppingorotherwiseshockingtheunit.Althoughdesignedforruggedoutdooruse,thisdeviceincorporatesasophisticated

digital circuitry which could be damaged in extreme cases of misuse.

• Cleantheopticallenswithaprofessionallenscleaningsupplies.

• Cleantheexteriorofthedevicewithasoftcleancloth.

• AvoidremovingtheeyepieceastheLCDdisplaycouldbecomedamaged.

• Donotleavethedeviceindirectsunlightorrain.

• Removethebatteriesifthedevicewillnotbeusedforlongerthanafewweeks.

For any other problems or questions, please contact Bushnell Customer Service at:

(800) 423-3537 • www.bushnell.com

TWO-Year LIMITED WARRANTY

Your Bushnell®product is warranted to be free of defects in materials and workmanship for two years after the date of

purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that

you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling,

installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.

Any return made under this warranty must be accompanied by the items listed below:

1) A check/money order in the amount of $10.00 to cover the cost of postage and handling

2) Name and address for product return

3) An explanation of the defect

4) Proof of Date Purchased

5) Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage

prepaid to the address listed below:

IN U.S.A. Send To: IN CANADA Send To:

Bushnell Outdoor Products Bushnell Outdoor Products

Attn.: Repairs Attn.: Repairs

8500 Marshall Drive 25A East Pearce Street, Unit 1

Lenexa, Kansas 66214 Richmond Hill, Ontario L4B 2M9

For products purchased outside the United States or Canada please contact your local dealer for applicable warranty

information. In Europe you may also contact Bushnell at: Bushnell Germany GmbH

European Service Centre

Mathias-Brüggen-Str. 80

D-50827 Köln

GERMANY

Tél: +49 221 995568-0

Fax: +49 221 995568-20

This warranty gives you specific legal rights.

You may have other rights which vary from country to country.

SPECIFICATIONS

Magnification: 3x

Objective Size: 32 mm

Battery Type: Two CR123 (3v, lithium) batteries (not included)

Viewing Range: 1-328 ft. / .3-100m

Field of View: 70 ft @ 100 yds / 23m @ 100m

Operating Temperature Range: 14-104 / -10 ~ 40 C (Humidity >90%)

Dimensions: 5.9 x 3.8 x 2.0 in. / 150 x 95 x 51 mm

Weight: 13.4 oz. /380g

Tripod Mountable: Yes

Video Out: NTSC video standard.

Note: low ambient light operation may create low signal levels.

External AC Power Adapter: 6V DC, 1A, plug polarity=positive tip

FCC Note:

is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. ese limits are designed

to provide reasonable protection against harmful interference in a residential installation. is equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

· Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver

· Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

· Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO

THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT.

Specications and designs are subject to change without any notice or obligation on the part of the manufacturer.

(800)423-3537•www.bushnell.com

Inhaltsverzeichnis

Andere Bushnell Fernglas Handbücher

Bushnell

Bushnell 137570 Bedienungsanleitung

Bushnell

Bushnell IMAGE VIEW 118322 Bedienungsanleitung

Bushnell

Bushnell 137501 Bedienungsanleitung

Bushnell

Bushnell EQUINOX Z Bedienungsanleitung

Bushnell

Bushnell ENGAGE X-10x42 Bedienungsanleitung

Bushnell

Bushnell PowerView 14-1042 Bedienungsanleitung

Bushnell

Bushnell ImageView 11-8200 Bedienungsanleitung

Bushnell

Bushnell Model 26-0542 Bedienungsanleitung

Bushnell

Bushnell 26-04002.5x42 Bedienungsanleitung

Bushnell

Bushnell 161001CM Bedienungsanleitung

Bushnell

Bushnell 11 0834 Bedienungsanleitung

Bushnell

Bushnell 205105; 205106 Bedienungsanleitung

Bushnell

Bushnell NatureView Bedienungsanleitung

Bushnell

Bushnell 190125 Bedienungsanleitung

Bushnell

Bushnell ImageView 98-0917/04-09 Bedienungsanleitung

Bushnell

Bushnell ENGAGE X Bedienungsanleitung

Bushnell

Bushnell LEGEND BB842W Bedienungsanleitung

Bushnell

Bushnell Spectator Sport Series Bedienungsanleitung

Bushnell

Bushnell Legend E Series Bedienungsanleitung

Bushnell

Bushnell Spectator Bedienungsanleitung

Bushnell

Bushnell NatureView Bedienungsanleitung

Bushnell

Bushnell 260140 Bedienungsanleitung

Bushnell

Bushnell 201930 Bedienungsanleitung

Bushnell

Bushnell ImageView 118328 Bedienungsanleitung

Beliebte Fernglas Handbücher anderer Marken

Celestron

Celestron VistaPix 72218 Bedienungsanleitung

Levenhuk

Levenhuk Atom Digital DNM200 Bedienungsanleitung

ATN

ATN PS-15 Bedienungsanleitung

Bresser

Bresser TOPAS 7x50 Bedienungsanleitung

Berger & Schroter

Berger & Schroter LN-G3-B50 Bedienungsanleitung

Leica

Leica geovid 8x42 HD-R Bedienungsanleitung

Noblex

Noblex NF 8 x 42 inception Bedienungsanleitung

PHOTONIS

PHOTONIS VYPER Bedienungsanleitung

ATN

ATN 6015-WPT Bedienungsanleitung

Famous Trails

Famous Trails ViewCatcher DCB 822 Bedienungsanleitung

AGM

AGM EXPLORATOR FSB50-640 Bedienungsanleitung

Opticron

Opticron Marine-3 7x50 BIF.GA Installationsanleitung

Kayoba

Kayoba 009129 Bedienungsanleitung

Vixen

Vixen ARENA Series Bedienungsanleitung

MAGINON

MAGINON NVB 60 Bedienungsanleitung

Leica

Leica Geovid 56 Bedienungsanleitung

Leica

Leica GEOVID PRO Bedienungsanleitung

Celestron

Celestron LandScout Bedienungsanleitung