Bushnell Neo Handheld Bedienungsanleitung

User

Manual

Model #

368050/368050C Lit # 98-1353/05-10

Section 1:

Introduction

Welcome 4

Important Information 5

Package Contents / Additional Requirements 6

Battery Information 7

Section 2: Using the Neo Sync Application

Download the Software 8

Install the Software 9

About the Sync App / Before You Launch the Sync App 10

Downloading Courses 11

Sending Courses to Your Neo 13

Settings 14

Section 3: Playing Golf With Your Neo

Controls and Parts Reference 15

Button Functions 16

Start Up / Main Menu 17

Play Golf Mode 18

Button Functions 19

Shot Distance Feature 19

The Play Menu 20

Map Course Page 21

Course Name Function 21

Map GPS Point Function 22

Other Main Menu Pages 23

Settings Page 24

Section 4: Troubleshooting Problems 26

Table of Contents

Dear Valued Consumer:

We sincerely hope you will nd your Bushnell Neo both enjoyable and easy

to use. Knowing the exact distance for each shot will assist you in lowering

your score and enhance your overall golng experience.

This User Manual was created for you to get the most out of your new device.

It only takes a few minutes to read, after which you can immediately begin

using the Bushnell Neo and enjoying its many features.

Also, please be sure to set up your iGolf.com membership (using the Neo

Sync application as described in this manual). As a member, you have access

to all the features and benets iGolf.com has to oer, including access to an

extensive database of GPS enabled golf course les for use on your Bushnell

Neo.

Thank you for choosing Bushnell.

Welcome

Introduction

Important Information

Introduction

Legal Disclaimer

Additional Information

By using this product, you agree that Bushnell Outdoor Products will not be

held legally responsible for any injury or damage to you or any person or

property caused by the user’s improper operation and/or poor judgment

while using this product.

Note: See the Warranty statement for other limitations on our liability.

The Global Positioning System (GPS), a network of 32 satellites orbiting Earth,

is operated and maintained by the U.S. government. This GPS device requires

at least 3 satellites to be acquired to accurately determine your position. Any

change made to the system by the government could aect the accuracy

and performance of this product.

Package Contents

1 - Bushnell Neo

1 - Belt Clip

1 - USB Cable

1 - AC/DC 5V Adapter

1 - Quick Start Guide

Additional Requirements*

PC with Windows 7, Vista, XP or 2000

or Mac with OS X, version 10.4.x or later **

Available USB port

*Required to transfer course data les.

**Windows is a registered trademark of Microsoft Corporation in the United States and

other countries. Mac and Mac OS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

Note: earlier versions of the Neo also included a CD-Rom containing the Sync App and

Drivers. This CD is no longer included or necessary, as the latest software for your Neo

is now provided as a le download at www.bushnell golfgps.com as described in this

manual.

Package Contents – Additional Requirements

Introduction

Battery Information

This product contains an internal rechargeable lithium-ion battery. Under

normal operating conditions, a new battery will last 14-16 hours on a

full charge. However, battery life is diminished due to a variety of factors

including temperature and backlight usage. All rechargeable batteries lose

their eective charge length over time.

The internal battery can be charged by connecting the included USB cable

to the device and a computer. Alternatively, the battery can be charged by

connecting the USB cable to the device and using the included adapter to

plug the charger into a standard 110V wall outlet. The battery should be

charged for at least six hours before using the Neo for the rst time.

Battery Information

Introduction

Using the Neo Sync Application

Download the Software

Follow these instructions to assist in the proper and complete installation

of the Neo Sync software application on your computer. Conrm the Neo is

NOT connected with the USB cable to your computer before beginning the

installation.

1. Go to www.bushnellgolfgps.com. Make sure you have the latest

version & update of Java for Windows* (link provided-click to

download).

2. Click Download and Install Software and Save the le (zip folder)

to your desktop. You will automatically receive the correct le

contents for your computer OS.

* Mac Users: use the Software Update feature (in the Apple menu) to ensure

you have the most up-to-date version of Java for your Mac.

DOWNLOAD

1-JAVA

2-Sync

App

Using the Neo Sync Application

Install the Software

1. “Unzip”* the downloaded le and open the folder inside. Double

click Bushnell_Neo_Installer.exe to run the Neo Sync App installer.

2. Click “USB Driver Setup” to install the required driver.

3. Click “Sync Application”to install the Sync software.

*Free software to decompress zip les is available on the internet if it was not included

with your PC or Mac.

1-Unzip downloaded folder

and run the Installer

INSTALL

2-USB Driver

3-Sync App

Introduction

The Bushnell Neo Sync application provides the user with all the tools

required to let the Neo communicate with your Windows or Mac computer*.

Using this interface, the user can control every aspect of golf course le

management.

* Compatible with Windows 7, Vista, XP ,2000 and Mac OSX

*Windows is a registered trademark of Microsoft

Corporation.

Mac and Mac OS are trademarks of Apple Inc.,

registered in the U.S. and other countries.

Using the Neo Sync Application

About the Sync App

Before You Launch the Sync App

1. Charge the Neo for at least 6 hours using the supplied AC adapter

& USB cable (the Neo’s battery will also be charged whenever it is

connected to a computer, but this will take longer to fully charge it for

the rst time).

2. Connect the cable to a USB port on your computer.

3. Insert other end of the cable into the USB port on the Neo (under the

rubber plug on the left side-see photo above).

4. Hold the Power button for approximately 2 seconds, until the display

shows “Bushnell Neo”.

5. A “USB Mode” message will appear on the Neo’s display when it is

ready to accept data, and the Sync App

will indicate “Connected” (at top left).

Inhaltsverzeichnis

Andere Bushnell Messgerät Handbücher

Bushnell

Bushnell 201042 Bedienungsanleitung

Bushnell

Bushnell Sport 850 Bedienungsanleitung

Bushnell

Bushnell Medalist 201354 Bedienungsanleitung

Bushnell

Bushnell Tour X Bedienungsanleitung

Bushnell

Bushnell 20-0880 Bedienungsanleitung

Bushnell

Bushnell Tour Z6 Bedienungsanleitung

Bushnell

Bushnell Pro 1M Bedienungsanleitung

Bushnell

Bushnell 20-2018 Bedienungsanleitung

Bushnell

Bushnell Pro X7 Jolt Bedienungsanleitung

Bushnell

Bushnell 202204 Bedienungsanleitung

Bushnell

Bushnell Neo+ Handheld Bedienungsanleitung

Bushnell

Bushnell 20-5103 Bedienungsanleitung

Bushnell

Bushnell YARDAGE PRO LEGEND Bedienungsanleitung

Bushnell

Bushnell PRIME Bedienungsanleitung

Bushnell

Bushnell Tour Z6 Jolt Slope Bedienungsanleitung

Bushnell

Bushnell neo 368050 Bedienungsanleitung

Bushnell

Bushnell Hybrid 201951 Bedienungsanleitung

Bushnell

Bushnell 20-0001 Bedienungsanleitung

Bushnell

Bushnell Gforce 1300 ARC 201965 Bedienungsanleitung

Bushnell

Bushnell TOUR V4 SHIFT Bedienungsanleitung

Bushnell

Bushnell Yardage Pro Laser Bedienungsanleitung

Bushnell

Bushnell Hybrid 201951 Bedienungsanleitung

Bushnell

Bushnell TOUR V3 Bedienungsanleitung

Bushnell

Bushnell Legend 1200 ARC Rangefinder Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung