Cabletron Systems 9F241-12 Technisches Dokument

9031587-01

SmartSwitch 9000

9F241-12

Local Management Appendix

Appendix

9F241-12 Module Speciﬁc

Information

Introduction

This appendix contains local management information that is speciﬁc to the

9F241-12 MicroLAN module.

Module Interfaces

The 9F241-12 MicroLAN Module has four interfaces. Table 1 lists the indentifying

number, name, and description of each interface.

FNB Resource Conﬁguration Codes

The 9F241-12 MicroLAN Module physically attaches to the FNB-1 and the FNB-2

on the SmartSwitch 9000 FNB backplane. By default, the module inserts into both

FNB-1 and the FNB-2. The FNB Resource Conﬁguration Screen allows you to

customize this conﬁguration to your particular needs.

Table 1. 9F241-12 MicroLAN Module Interfaces

Interface

Number Interface

Name Interface

Description

1 SMB-1 1 Mbps System Management Bus

2 SMB-10 10 Mbps System Management Bus

3 FNB-1 Flexible Network Bus (dual attached)

4 FNB-2 Flexible Network Bus (dual attached)

9F241-12 Module Speciﬁc Information

The FNB Resource Conﬁguration Screen allows you to:

• Select the rings (either primary or secondary) of each FNB to which the module

will attach its MAC

• Determine whether the module will insert into those rings or bypass those

rings

The terms INSERT and BYPASS refer to relays that are located on the module.

INSERT causes a relay to connect the module’s front panel ports to the selected

FNB rings. BYPASS causes a relay to disconnect the module’s front panel ports

from the selected FNB rings.

Front FNB Ring

Relay

Panel

Ports

Front

Panel

Ports

FNB Ring

Relay

INSERT:

BYPASS:

9F241-12 Module Speciﬁc Information

The FNB Resource Conﬁguration Screen lists all possible connections a module

can support on the FNB, displays the current connection, and allows you to

change the connection. Table 2 lists and describes the FDDI connections from

which you can select.

Table 2. 9F241-12 FNB Resource Conﬁguration Codes

Conﬁguration

ID FDDI Connections Description

1FNB 1 Pri. (MAC1) Byp.,

FNB 2 Pri. (MAC2) Byp.

The module is attached, but not inserted, to

the primary ring on the FNB-1. The module is

attached, but not inserted, to the primary ring

on the FNB-2. MAC-1 resides on the primary

of FNB-1; MAC-2 resides on the primary of

FNB-2.

2FNB 1 Pri. (MAC1) Byp.,

FNB 2 Pri. (MAC2) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned off. The switch that inserts the module

into the FNB-2 is turned on. MAC-1 resides on

the primary of FNB-1; MAC-2 resides on the

primary of FNB-2.

3FNB 1 Pri. (MAC1) Ins.,

FNB 2 Pri. (MAC2) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned off. MAC-1 resides on

the primary of FNB-1; MAC-2 resides on the

primary of FNB-2.

4FNB 1 Pri. (MAC1) Ins.,

FNB 2 Pri. (MAC2) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned on. MAC-1 resides on

the primary of FNB-1; MAC-2 resides on the

primary of FNB-2.

5FNB 1 Pri. (MAC1) Byp.,

FNB 2 Sec. (MAC2) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned off. MAC-1

resides on the primary of FNB-1; MAC-2

resides on the secondary of FNB-2.

9F241-12 Module Speciﬁc Information

6FNB 1 Pri. (MAC1) Byp.,

FNB 2 Sec. (MAC2) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned on. MAC-1

resides on the primary of FNB-1; MAC-2

resides on the secondary of FNB-2.

7FNB 1 Pri. (MAC1) Ins.,

FNB 2 Sec. (MAC2) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned off. MAC-1

resides on the primary of FNB-1; MAC-2

resides on the secondary of FNB-2.

8FNB 1 Pri. (MAC1) Ins.,

FNB 2 Sec. (MAC2) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned on. MAC-1

resides on the primary of FNB-1; MAC-2

resides on the secondary of FNB-2.

9FNB 1 Sec. (MAC1) Byp.,

FNB 2 Pri. (MAC2) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. MAC-1

resides on the secondary of FNB-1; MAC-2

resides on the primary of FNB-2.

10 FNB 1 Sec. (MAC1) Byp.,

FNB 2 Pri. (MAC2) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. MAC-1

resides on the secondary of FNB-1; MAC-2

resides on the primary of FNB-2.

Table 2. 9F241-12 FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F241-12 Module Speciﬁc Information

11 FNB 1 Sec. (MAC1) Ins.,

FNB 2 Pri. (MAC2) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. MAC-1

resides on the secondary of FNB-1; MAC-2

resides on the primary of FNB-2.

12 FNB 1 Sec. (MAC1) Ins.,

FNB 2 Pri. (MAC2) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. MAC-1

resides on the secondary of FNB-1; MAC-2

resides on the primary of FNB-2.

13 FNB 1 Sec. (MAC1) Byp.,

FNB 2 Sec. (MAC2) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. MAC-1

resides on the secondary of FNB-1; MAC-2

resides on the secondary of FNB-2.

14 FNB 1 Sec. (MAC1) Byp.,

FNB 2 Sec. (MAC2) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. MAC-1

resides on the secondary of FNB-1; MAC-2

resides on the secondary of FNB-2.

Table 2. 9F241-12 FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F241-12 Module Speciﬁc Information

15 FNB 1 Sec. (MAC1) Ins.,

FNB 2 Sec. (MAC2) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. MAC-1

resides on the secondary of FNB-1; MAC-2

resides on the secondary of FNB-2.

16 FNB 1 Sec. (MAC1) Ins.,

FNB 2 Sec. (MAC2) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. MAC-1

resides on the secondary of FNB-1; MAC-2

resides on the secondary of FNB-2.

Table 2. 9F241-12 FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F241-12 Module Speciﬁc Information

Module Speciﬁc Conﬁguration Screen

In the FNB Resource Conﬁguration Screen, you determine which Master ports are

attached to which FNB/MAC. The default is:

• All M ports are on FNB-1 and MAC-1 is on the primary ring

• No M ports are on FNB-2, and MAC-2 is on the primary ring

Figure 1. 9F241-12 Module Speciﬁc Conﬁguration Screen

If you have a conﬁguration that has one or both FNBs bypassed, the PATH ﬁeld

will display either MAC-1 or MAC-2.

NOTE

SmartSwitch 9000 LOCAL MANAGEMENT

Module Specific Configuration

Module Name: 9F241-12 Firmware Revision: 01.50.15

Slot Number: 11 BOOTPROM Revision: 01.01.02

FNB 1 Pri. (MAC1) Ins., FNB 2 Pri. (MAC2) Ins.

PORT# PATH CONNECT STATE

1 [FNB-1] CON

2 [FNB-1] CON

3 [FNB-1] CON

4 [FNB-1] CON

5 [FNB-1] CON

6 [FNB-1] CON

7 [FNB-1] CON

8 [FNB-1] CON

9 [FNB-1] CON

10 [FNB-1] CON

11 [FNB-1] CON

12 [FNB-1] CON

SAVE RETURN

9F241-12 Module Speciﬁc Information

Assigning an FNB Ring to a Module’s M-Port

To assign an FNB ring to a module’s M-port:

1. Use the arrow keys to highlight the

PATH

ﬁeld next to the desired port.

2. Press the

SPACE BAR

to toggle to the desired ring (either MAC-1 or MAC-2).

3. Press the

Return

key. Repeat

steps 1 - 3

to assign an FNB ring to other M-

ports.

4. Use the arrow keys to highlight

SAVE

at the bottom of the screen and then

press the

Return

key.

When the message “SAVED OK” appears, the edits you have made are saved.

If you exit without saving, the message “NOT SAVED -- PRESS SAVE TO

KEEP CHANGES” appears. If you exit without saving, your edits will be lost.

5. Use the arrow keys to highlight

RETURN

and then press the

Return

key.

Andere Handbücher für 9F241-12

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cabletron Systems Netzwerk-Hardware Handbücher

Cabletron Systems

Cabletron Systems WPIM-DDS Programmierhandbuch

Cabletron Systems

Cabletron Systems HSIM-FE6 Bedienungsanleitung

Cabletron Systems

Cabletron Systems 9E132-15 Technisches Dokument

Cabletron Systems

Cabletron Systems IRBM/LM Bedienungsanleitung

Cabletron Systems

Cabletron Systems TRMIM-22 Bedienungsanleitung

Cabletron Systems

Cabletron Systems 9A426-01 Bedienungsanleitung

Cabletron Systems

Cabletron Systems Cabletron BRIM-F6 Bedienungsanleitung

Cabletron Systems

Cabletron Systems MMAC-Plus 9E423-24 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SWPIM-E1 Bedienungsanleitung

Cabletron Systems

Cabletron Systems WPIM-S/T Bedienungsanleitung

Cabletron Systems

Cabletron Systems WPIM T1 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SWPIM-BRI Bedienungsanleitung

Cabletron Systems

Cabletron Systems HSIM HSIM-G01 Bedienungsanleitung

Cabletron Systems

Cabletron Systems TPXMIM-20 Bedienungsanleitung

Cabletron Systems

Cabletron Systems KBU64 Rackmount Bedienungsanleitung

Cabletron Systems

Cabletron Systems NBR-220 Bedienungsanleitung

Cabletron Systems

Cabletron Systems NBR-220 Programmierhandbuch

Cabletron Systems

Cabletron Systems ATX Handbuch

Cabletron Systems

Cabletron Systems WPIM-DI Montage- und Wartungsanleitung

Cabletron Systems

Cabletron Systems MMAC-Plus 9G536-04 Bedienungsanleitung

Cabletron Systems

Cabletron Systems Environmental Module TM 9C300-1 Bedienungsanleitung

Cabletron Systems

Cabletron Systems Netlink FRX8000 Montageanleitung

Cabletron Systems

Cabletron Systems BRIM-A6DP Bedienungsanleitung

Cabletron Systems

Cabletron Systems FDCMIM-24 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung