Cabletron Systems 9F120-08 Technisches Dokument

9031372-01

SmartSwitch 9000

9F120-08 / 9F122-12 / 9F125-08

Local Management Appendix

Appendix

9F120-08 / 9F122-12 / 9F125-08

Module Speciﬁc Information

Introduction

This appendix contains local management information that is speciﬁc to the

9F120-08, 9F122-12 and 9F125-08 MicroLAN modules.

Default Interface Codes

The Default Interface ﬁeld on the General Conﬁguration Screen allows you to

enter a number (one through three). Each number represents a default interface

for the selected module. The table below lists the numbers you can enter, each

number’s corresponding interface, and a brief description of that interface. The

default for this ﬁeld is NONE, meaning no default interface selected.

Table 1. 9F12x-xx MicroLAN Module Default Interface Codes

Number Interface Description

1 SMB-1 1 mbps System Management Bus

2 SMB-10 10 mbps System Management Bus

3 FNB Flexible Network Bus (dual attached)

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

FNB Resource Conﬁguration Codes

All of the MicroLAN Modules described in this appendix physically attach to the

FNB-1 and the FNB-2 on the SmartSwitch 9000 backplane. By default, the module

inserts into four rings (the primary and secondary rings of the FNB-1 and the

FNB-2). The FNB Resource Conﬁguration Screen allows you to customize this

conﬁguration to your particular needs.

The FNB Resource Conﬁguration Screen allows you to:

• Select the rings (primary or secondary) of each FNB to which the module will

attach

• Determine whether the module will insert into those rings or bypass them

• Select the ring where the MAC will reside

The terms INSERT and BYPASS refer to relays that are located on the module.

INSERT causes a relay to connect the module’s front panel ports to the selected

ring. BYPASS causes a relay to disconnect the module’s front panel ports from the

selected ring.

INSERT:

BYPASS:

The FNB Resource Conﬁguration Screen lists all possible connections a module

can support on the FNB, displays the current connection, and allows you to

change the connection. Table 2 lists and describes the FDDI Connections from

which you can select.

Front FNB Ring

Relay

Panel

Ports

Front

Panel

Ports

FNB Ring

Relay

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes

Conﬁguration

ID FDDI Connections Description

1 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached, but not inserted, to

the primary ring on the FNB-1. The module is

attached, but not inserted, to the primary ring

on the FNB-2. The MAC resides on FNB-1.

2 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned off. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-1.

3 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned off. The MAC resides

on FNB-1.

4 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-1.

5 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned off. The switch that inserts the module

into the FNB-2 is turned off. The MAC resides

on FNB-2.

6 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned off. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-2.

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

7 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned off. The MAC resides

on FNB-2.

8 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-2.

9 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

10 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

11 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

12 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

13 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

14 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

15 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

16 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

17 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

18 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

19 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

20 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

21 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

22 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

23 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

24 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

25 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

26 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

27 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

28 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

29 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

30 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

31 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

32 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cabletron Systems Schalten Handbücher

Cabletron Systems

Cabletron Systems 9F122-12 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSTACK 10 ELS10-26 Bedienungsanleitung

Cabletron Systems

Cabletron Systems MMAC-Plus 9H423-28 Handbuch

Cabletron Systems

Cabletron Systems SMALL OFFICE CyberSwitch 150 Bedienungsanleitung

Cabletron Systems

Cabletron Systems FlowPoint 2100 12 Bedienungsanleitung

Cabletron Systems

Cabletron Systems MMAC-Plus 9H421-12 Handbuch

Cabletron Systems

Cabletron Systems ATX Bedienungsanleitung

Cabletron Systems

Cabletron Systems FN10 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSwitch 6500 Bedienungsanleitung

Cabletron Systems

Cabletron Systems TRMIM 24A TRMIM-24A Bedienungsanleitung

Cabletron Systems

Cabletron Systems 42T Bedienungsanleitung

Cabletron Systems

Cabletron Systems MMAC-Plus 9H531-18 Bedienungsanleitung

Cabletron Systems

Cabletron Systems ESXMIM Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartStack STS-8SU Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartCell 6A000 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSTACK ELS100-S24TX2M Bedienungsanleitung

Cabletron Systems

Cabletron Systems MRXI 10BASE-T Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSwitch 2500 Bedienungsanleitung

Cabletron Systems

Cabletron Systems ATX Bedienungsanleitung

Cabletron Systems

Cabletron Systems STHI Bedienungsanleitung

Cabletron Systems

Cabletron Systems 7F06-02 FDDI SmartSwitch Bedienungsanleitung

Cabletron Systems

Cabletron Systems 2208 Bedienungsanleitung

Cabletron Systems

Cabletron Systems MMAC-Plus 9T125-08 Bedienungsanleitung

Cabletron Systems

Cabletron Systems BRIM-A6 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung