CAHORS Digital STM 17 HD Bedienungsanleitung

CAHORS Digital –CS 60022

46003 Cahors Cedex 9 –FRANCE

www.groupe-cahors.com

STM 17 HD

DVB-S2+T2/C Compact Meter

User Manual

Ref 0145131R13

CAHORS Digital –CS 60022 
46003 Cahors Cedex 9 –FRANCE 
www.groupe-cahors.com 
User`s Manual 
1/19 
DVB COMBO METER 
 
1. Main Features .............................................................................................................................................................................2 
2. Buttons and Indicators ................................................................................................................................................................ 3 
3. How to measure .......................................................................................................................................................................... 4 
4. Home menu.................................................................................................................................................................................5 
5. Satellite........................................................................................................................................................................................ 5 
5.1 Satellite Measure............................................................................................................................................................5 
5.2 LNB Setting ....................................................................................................................................................................6 
5.3 Edit Satellite ................................................................................................................................................................... 8 
5.4. Spectrum Chart .............................................................................................................................................................9 
5.5. Constellation..................................................................................................................................................................9 
5.6 Angle Calculation .........................................................................................................................................................10 
5.7 TP Control ....................................................................................................................................................................12 
6. Terrestrial .................................................................................................................................................................................. 13 
6. 1 Terrestrial Measure .....................................................................................................................................................13 
6.2 Auto Scan.....................................................................................................................................................................14 
6. 3 Spectrum Chart ...........................................................................................................................................................14 
6.4 Scope ...........................................................................................................................................................................14 
6.5 RF Channel List............................................................................................................................................................ 14 
6.6 Setting ..........................................................................................................................................................................14 
7. Cable TV ...................................................................................................................................................................................15 
7.1 Cable measure .............................................................................................................................................................15 
7.2 Tilt.................................................................................................................................................................................15 
7.3 Spectrum Chart ............................................................................................................................................................16 
8. System Setting ..........................................................................................................................................................................16 
9. Accessories...............................................................................................................................................................................16 
10. Trouble shooting .....................................................................................................................................................................17 
11. Technical Specification ...........................................................................................................................................................18 
Please refer to the following notes before use. 
 • Please read this user manual carefully to be able to safely use and maintain your meter. 
 •The technical specifications and operation guides in this manual are subject to changes 
 without notice. 
 • Before using the first time, please charge the battery for 3 hours. 
 •Please use the special adapter for charging attached with the meter, do not use it for 
 other product 
 • In case of any technical questions, please contact your local dealer. 

CAHORS Digital –CS 60022

46003 Cahors Cedex 9 –FRANCE

www.groupe-cahors.com

User`s Manual

2/19

1. MAIN FEATURES

Support DVB-S/DVB-S2/DVB-T/DVB-T2/DVB-C

LNB short-circuit protection and indicator.

Extremely fast and accurate with high sensitivity.

320*240 color LCD display with controllable back light.

Database editable by user easily.

Signal lock audible notification: on/off.

Firmware can be upgraded by USB port.

Database can be edited on PC and downloaded by USB port.

Power-supply100-240V/50/60Hz 12V, 1000Am.

Ultra-long standby, low power consumption.

Fast charging Li-ion battery can last around 3 hours DVB-S/S2

Real time Spectrum-Analyzer and transponder message detected

Constellation diagram with 8PSK, QPSK, 16APSK, 32APSK.

Angle calculation of azimuth and elevation.

Azimuth and elevation measurement.

Satellite alignment system.

Power, C/N, BER, Modulation mode display.

DisEqC1.0, DisEqC1.2 and USALS supported.

Auto DisEqC identification for DisEqC1.0

SCR/SCD2 supported.

Cable identification for Quattro LNB easily DVB-T/T2

Power, VBER, SNR and CBER display.

Spectrum analyzer

SCOPE Display

Channel Auto Scan DVB-C

DVB-C(QAM) : Power, CBER, PBER, SNR and Symbol Rate display

Spectrum analyzer

Tilt Display

CAHORS Digital –CS 60022

46003 Cahors Cedex 9 –FRANCE

www.groupe-cahors.com

User`s Manual

3/19

2. BUTTONS AND INDICATORS

1. LNB INPUT: Signal input port, connects directly to antenna using coaxial cable.

2. LCD Screen: Show menus and parameters.

3. Charge Light:

Red: the battery is being charged.

Blue: the battery is full.

4. Warn Light: Flash if LNB is short connected

5. Working Light:

Green: the meter is in working status

6. Function Keys:

F1: Turn on/off the screen display

F2:Enable/disable deep when pressing keys

CAHORS Digital –CS 60022

46003 Cahors Cedex 9 –FRANCE

www.groupe-cahors.com

User`s Manual

4/19

F3: Enter to TP control menu in Satellite Measure menu

F4: Enter to Auto DiSEqC function in Satellite Measure menu

7. Navigation Keys:

/:Move focus or change value.

/:Move focus or change value

8. MENU: Go into main menu or exit from the current menu

9. OK: Confirm

10 . : Turn the meter on/off, press and hold for 2 seconds to power on

the meter.

11. Charging: Connect with the charger cord for charging the equipment.

12. Reset: Reset the meter

3. HOW TO MEASURE

Power on the meter, select the system to measure or select system setting to set parameters for the device in the

HOME menu.

In all menus, press [/] button to navigate, press [/] button to change the value of focused item, press

[OK] button to confirm your select, edit value or enter a list to select a wanted item, press [MENU] button to enter

or exit menus.

How to measure satellite signal:

1. Connect the signal cable to F-Type, Female jack.

2. Enter Satellite submenu.

3. Calculate the elevation and azimuth according to your local position in Calculate Angels menu. Set or adjust

your dish to the right position.

4. Set the LNB parameters according to your field environment in LNB Setting menu. Make sure all the things

are correct.

5. Enter to Satellite Measure menu, select the correct satellite and a normal transponder to check the signal is

locked or not.

According to all the output values, such as strength, quality, CNR and power level, you can accurate your dish to

get the best quality signal. And also you can analyzer the signal in Spectrum Chart menu and Constellation menu

to help you to learn the locked signal well. User can edit the satellite position and transponder in Satellite Edit

menu.

How to measure terrestrial signal:

1. Connect the signal cable to IEC-Type, Female jack first.

2. Make sure set Antenna Power to ON in System Setting menu if your antenna needs power supply.

3. Analyze the signal in Terrestrial Measure menu.

4. Analyze the scope in Scope menu and the spectrum in Spectrum Chart menu.

CAHORS Digital –CS 60022

46003 Cahors Cedex 9 –FRANCE

www.groupe-cahors.com

User`s Manual

5/19

How to measure cable signal:

1. Connect the signal cable to IEC-Type, Female jack first.

2. Analyze the signal in cable Measure menu.

3. Analyze the TILT in TILT menu and the spectrum in Spectrum Chart menu.

Please refer below descriptions if you want to learn all functions.

4. HOME MENU

The meter will enter this menu first during power on. Press [/]

to switch items or [OK] to enter submenus.

Satellite: Submenu for DVB-S/S2 system.

Terrestrial: Submenu for DVB-T/T2 system.

Cable TV: Submenu for DVB-C system.

System Setting: Submenu for system parameters setting. Such as language, auto

power off and so on.

5. SATELLITE

The submenu for DVB-S/S2 functions. User can read the parameters of the live signal, analyze the spectrum

chart, get the constellation chart, calculate the angles for a special satellite or edit the parameters of satellites.

5.1 SATELLITE MEASURE

The device will show the strength and quality of the live signal.

And also BER, CNR, modulator type, FEC and power level

S2-Q-4/5: The modulator type,

FEC and DVB system of the signal.

036.0°E Eutelsat 36: The current satellite. Press [/] to switch between satellites

and press [OK] to enter satellite list to select satellite. Press [OK]

button to select the focused satellite and press [MENU] to exit

from edit menu. All the other parameters on the menu will be refreshed

according to the selected satellite.

CAHORS Digital –CS 60022

46003 Cahors Cedex 9 –FRANCE

www.groupe-cahors.com

User`s Manual

6/19

12322/V/27500: The current transponder. Press [/] to switch between

transponders and press [OK] to enter edit. Press [/] to

move curse and [/] to change value of each focused item in edit menu.

9750-10600: The LNB type. Press [/] to switch between LNB types and

press [OK] to enter list to select type.

22K: The 22k parameter. Press [/] button to switch between

Auto, Off and On.

13V: The power parameter of the LNB. Press [/] button to

switch between Auto, Off, 13v and 18v.

Lock : The lock status.

CNR: The CNR value of signal.

PWR: The power level of signal.

BER: The BER value of signal.

Str: The strength of signal.

Qlt: The quality value of signal.

5.2 LNB SETTING

All the LNB parameters are set in this menu. Such

as LNB type, LNB power, 22k, Diseqc type and

motor type.

042.0°E Turksat3/4A: The current satellite. Press [/] to switch between satellites and press [OK]

to enter satellite list to select satellite. Press [OK] button to select the focused satellite and press

[MENU] to exit from edit menu. All the other parameters on the menu will be refreshed according to the

selected satellite.

11096/H/30000: The current transponder. Press [/] to switch between

transponders and press [OK] to enter edit. Press [/]

to move curse and [/] to change value of each focused

item in edit menu.

UNIVERSAL: The LNB type. Press [/] to switch between LNB types and

press [OK] to enter list to select type.

22K: The 22k parameter. Press [/] button to switch between

Auto, Off and On.

CAHORS Digital –CS 60022

46003 Cahors Cedex 9 –FRANCE

www.groupe-cahors.com

User`s Manual

7/19

Pwr: The power parameter of the LNB. Press [/] button to

switch between Auto, Off, 13v and 18v.

None: The Diseqc port setting for Diseqc 1.0 and 1.1. Press [/]

button to switch between ports or press [OK] button to select

port in the list.

Fixed: Set the motor type. Press [/] to switch between Fixed,

USALS and Diseqc 1.2.

5.2.1 USALS Setting:

Press [OK] to enter USALS SETUP menu on Position Type if

the type sets to USALS parameters

042.0°E Turksat3/4A: The current satellite. Press [/] to switch between satellites

and press [OK] to enter satellite list to select satellite. Press [OK]

button to select the focused satellite and press [MENU] to exit

from edit menu. All the other parameters on the menu will be refreshed

according to the selected satellite.

My Longitude: The longitude of local. Press [OK] to enter edit mode, then

press [/] to change the value and [/] to move curse.

Press [OK] again to exit edit mode

My Latitude: The latitude of local. Press [OK] to enter edit mode, then

press [/] to change the value and [/] to move curse.

Press [OK] again to exit edit mode

Move to center: Press [OK] to move the dish to central position.

Move to position: Press [OK] to confirm to move to setting position

5.2.2 Diseqc 1.2 Setting:

Press [OK] to enter Diseqc 1.2 setting menu on Position Type

if the type sets to Diseqc 1.2

Move single step: Move the motor by step. Press [/] to move to west or east

Move incessantly: Move the motor incessantly. Press [/] to move to west or

east

CAHORS Digital –CS 60022

46003 Cahors Cedex 9 –FRANCE

www.groupe-cahors.com

User`s Manual

8/19

Move to centre: Press [OK] to move to centre point

Limit east: Set the move limit to east

Limit west: Set the move limit to west

Save and Commit: Press [OK] to save current position

Str.: The strength of signal

Qlt.: The quality of signal

5.3 EDIT SATELLITE

The parameters of satellite, such as Orbit Position and Transponder

can be edit in this menu. All the satellites will be listed in this menu.

Press [/] buttons to move curse in list and press [OK] button to

edit.

Press [OK] button to edit the name or the orbit position of current

satellite in the dialog. And then press [/] to move curse and

[/] to change value of each focused item in edit menu.

Press [/] button to switch between satellite and transponder

list.

Press [F3] to add new transponder. Press [F4] to enter delete

dialog, press [OK] to confirm to delete or press [MENU] to cancel.

And press [OK] button to edit selected transponder. And then press

[/] to move curse and [/] to change value of each focused

item in edit menu.

CAHORS Digital –CS 60022

46003 Cahors Cedex 9 –FRANCE

www.groupe-cahors.com

User`s Manual

9/19

5.4. SPECTRUM CHART

This menu will show the spectrum chart of setting frequency range

on current cable line. Press [/] to switch curser focus between

Start Frequency, LNB Type, End Frequency, LNB Power/22K and

Current Frequency Mark.

--K: Show the 22k status. -–K: 22k off;

22k: 22k on

--V: Show the RF power output status. The values are: 13V, 18V and OFF(--V)

40~70~100: The range of power level. And the range is 0 ~ 100

: The current frequency curse, press [/] to set the current frequency.

03500: The start frequency of the spectrum chart. Press [OK] to edit it.

mark: The power level value of current frequency

04000: The end frequency of the spectrum chart. Press [OK] to edit it.

cur: The current frequency

05150: The current LNB type mode.

Press [/] to switch between LNB types.

Press [OK] button to check whether the current frequency can be

locked or not. A dialog will show the locked transponder once it

locks.

5.5. CONSTELLATION

Move the curse to Constellation icon and press OK to select

satellite and transponder for constellation analyzer. See the figure

below:

042.0°E Turksat3/4A: The current satellite. Press [/] to switch between

satellites and press [OK] to enter satellite list to select satellite.

Press [OK] button to select the focused satellite and press

[MENU] to exit from edit menu. All the other parameters on the

menu will be refreshed according to the selected satellite.

11096/H/30000: The current transponder, press [/] to switch between

transponders

Inhaltsverzeichnis

Andere CAHORS Digital Messgerät Handbücher

CAHORS Digital

CAHORS Digital STM 26 HD Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung