Callaway Micro Bedienungsanleitung
© 2016 CALLAWAY GOLF COMPANY. Callaway Golf and the
Chevron device are trademarks of Callaway Golf Company.
IZZO Golf is an ofcial licensee of Callaway Golf Company.
Micro RANGEFINDER
INTRODUCTION
The Callaway Micro Laser Rangender delivers the benets of both
laser and prism technology within one ultra compact, lightweight
device. For courses that have agsticks with built-in reectors, prism
mode is ideal for quickly acquiring the distance to the pin with minimal
effort and a high degree of accuracy. To acquire distances to other
objects, laser mode allows you to scan the landscape for distances to
hazards, trees, front of the green, etc. When playing a course without
agstick reectors, simply stay in laser mode throughout the round
and engage P.A.T. (Pin Acquisition Technology) to lock onto the ag
quickly and accurately.
2INTRODUCTION
INCLUDES
A. CR2 - 3VOLT LITHIUM BATTERY
B. Carry Case
C. Cleaning Cloth
Product Callaway Micro Rangender
Model Micro
Dimensions 3.5" x 2.5" x 1.5 "
Weight 3.74 oz.
Battery CR2 3 -Volt Lithium Battery
Display LCD Display
Max Range 5-600 yd
Range To Flag 5-300 yd (Prism Mode)
Accuracy +/- 1 yd
Unit of Measure Yards/Meters
Weather Resistant Protected against light rain
To view the instructional video, please visit:
www.callawaydmd.com/micro-laser-rangender
ENGLISH 3
SPECIFICATIONS
BATTERY INSTALLATION
The Laser Rangender uses a replaceable CR2 3-volt lithium
battery. To install, remove the battery cap located on the side of the
device. Insert battery negative end rst (at end) and close battery cap.
1. Lift hatch tab.
2. Turn counterclockwise to open.
3. Insert battery into chamber (negative end rst).
4. Replace battery cap and tighten by turning clockwise.
NOTE: If the Low Battery Icon is present on LCD display, there are
approximately 200 ranges left from the time the Low Battery Icon rst
appears until the battery is completely drained. The Low Battery Icon
will ash if the battery life is very low. In this case, the battery needs to
be replaced before next use.
4BATTERY INSTALLATION
ENGLISH 5
RANGEFINDER DIAGRAM
A. Aiming Scope
B. Power Button
C. Mode Button (M)
D. LCD Screen
E. Battery Chamber
LCD DISPLAY
A. Distance
B. Unit of Measure (Y or M)
C. Mode Indicator
D. Low Battery Indicator
163
LASER
Y
6HOW TO USE
HOW TO USE
1. While holding the rangender out in
front of you, PRESS and RELEASE the
Power Button to power on the Laser.
Note: Be sure to use both eyes while
looking through the Aiming Scope with
the rangender out in front of you, (DO
NOT aim by bringing the rangender
close to one eye.
2. Align the Red Dot inside the Aiming
Box and aim at your target. PRESS and
RELEASE the Power Button again to
re the laser.
3. The device will make a “beep” sound
and the distance will be displayed on
the LCD Screen.
Note: There could be a slight delay
(1 or 2 sec.) before the distance is
displayed.
158
PIN
Y
INCORRECT
ENGLISH 7
MEASUREMENT MODES
To change modes, PRESS and RELEASE the Mode Button (M).
1. Laser - Standard Laser Mode is recommended when measuring
distances to larger objects.
2. Pin -P.A.T. (Pin Acquisition Technology) Mode is best used
when measuring the distance to a agstick or smaller objects.
3. Prism -Prism Mode is ideal for courses that have agsticks with
NOTE: Prism Mode will only work properly when aiming at a agstick
with a built-in reector.
- - -
LASER
Y
- - -
PIN
Y
- - -
PRISM
Y
1. Laser Mode 2. Pin Mode 3. Prism Mode
built-in reectors. Be sure to aim in the general direction
of the built-in reector. For example, if the built-in reector
is located in the middle of the agstick, then aim the laser
towards the middle of the agstick (see diagram on Page 8).
4. Scanning - To measure distances to multiple targets in succession,
HOLD the Power Button. Measurements will change as you scan
the landscape and change targets. Scanning should only be used
while in Laser or Pin Mode.
NOTE: While scanning in P.A.T. Mode, the measurement will only
change when a shorter distance is measured. This is useful when
measuring the distance to a agstick when there are trees or other
objects in the background.
5. Unit of Measure - To change the unit of measure from Yards (“Y”)
to Meters, PRESS Power Button to power on, then HOLD Mode
Button (M). The unit of measure is indicated by a “Y” or “M”
shown directly to the right of the distance displayed.
PRISM MODE DIAGRAM
NOTE: The closer you are to the Pin, the more accurately you will
have to aim the Rangender in the direction of the built in reector.
8HOW TO USE
Reector located in
Middle of Pin
Reector located on
Top of Pin
ENGLISH 9
OPERATIONAL NOTES
1. The maximum measurement range is 5-600 yards to random
objects and 5-300 yards to a agstick with, +/- 1 yard accuracy.
NOTE: Maximum range can depend on several factors, including
target characteristics and environmental conditions. For instance,
longer maximum distances may be obtained to targets that are
large in size, brightly colored, or have a reective nish. Ranging
capability can also be affected by the angle to the target and
lighting conditions.
2. Auto Shutoff - To conserve battery life, the device will
automatically power off when idle for more than 5 seconds.
3. Weather Conditions - Heavy rain and thick fog can potentially
limit the maximum range of the device.
4. Weather Resistant - The device is protected against light rain.
MAINTENANCE
1. To clean, use only a soft, clean cloth to prevent scratches.
2. Do not submerge in liquid or apply any cleaning products.
3. Do not store in extremely hot/cold temperatures (<50°F - >110° F).
4. Store in carrying case when not in use.
Inhaltsverzeichnis
Sprachen:
Andere Callaway Messgerät Handbücher
Callaway
Callaway CSi PRO Bedienungsanleitung
Callaway
Callaway 350TL Bedienungsanleitung
Callaway
Callaway LS Bedienungsanleitung
Callaway
Callaway 200 S Bedienungsanleitung
Callaway
Callaway Hybrid Bedienungsanleitung
Callaway
Callaway 300 Bedienungsanleitung
Callaway
Callaway EZ Bedienungsanleitung
Callaway
Callaway Micro Pro Bedienungsanleitung
Callaway
Callaway XLS Bedienungsanleitung
Callaway
Callaway 200 S Bedienungsanleitung
Callaway
Callaway 250+ Bedienungsanleitung
Callaway
Callaway 300 PRO Bedienungsanleitung
Callaway
Callaway Micro Pro Bedienungsanleitung
Callaway
Callaway ProXS Bedienungsanleitung
Callaway
Callaway CSi PRO Bedienungsanleitung
Callaway
Callaway 300 PRO Bedienungsanleitung
Callaway
Callaway 350TL Bedienungsanleitung
Callaway
Callaway TOUR-S Bedienungsanleitung
Callaway
Callaway LS Bedienungsanleitung
Callaway
Callaway XLS Bedienungsanleitung
