Campbell IRGASON Bedienungsanleitung
Revision: 08/2021
Copyright © 2010 – 2021
Campbell Scientific, Inc.
Product Manual
Table of contents
1. Introduction 1
2. Precautions 1
3. Initial inspection 2
4. Overview 2
5. Specifications 3
5.1 Measurements 3
5.2 Output signals 6
5.3 Physical description 8
5.4 Power requirements during power up and operation 11
6. Installation 11
6.1 Orientation 11
6.2 Mounting 12
6.3 Wiring and connections 15
7. Settings 19
7.1 Factory defaults 20
7.2 Bandwidth 20
7.3 SDM address 21
7.4 Unprompted output 21
7.5 Unprompted output rate 21
7.6 RS-485 baud rate 21
7.7 Analog output 21
7.8 ECMon update rate 21
7.9 Temperature sensor 22
7.10 Fixed temperature value 22
7.11 Pressure sensor 22
7.11.1 Pressure gain 22
7.11.2 Pressure offset 22
7.11.3 Fixed pressure value 23
7.12 Pressure differential enable 23
7.13 Heater control 23
Table of Contents - i
7.14 ECMon 24
7.15 Device Configuration Utility 26
8. EC100 outputs 27
8.1 SDM output 27
8.2 USB or RS-485 output 28
8.3 Analog outputs 30
9. Maintenance 31
9.1 Routine maintenance 31
9.2 Wick maintenance 32
9.2.1 Sonic wicks 32
9.2.2 Gas analyzer wicks 33
9.3 Gas analyzer window cleaning 34
9.4 Zero and span 34
9.5 Replacing desiccant and scrubber bottles 40
9.6 Factory recalibration 41
10. Data collection and data processing 42
10.1 Data collection and processing with EasyFluxDL 43
10.2 Data logger programming with CRBasic 45
10.2.1 EC100() instruction 46
10.3 EC100Configure() instruction 49
10.3.1 ConfigCmd 11 zero-and-span control 51
10.3.2 ConfigCmd 18 heater voltage 52
10.4 Example CRBasic program 53
11. Theory of operation 54
11.1 IRGASON sonic anemometer 54
11.1.1 Wind speed 54
11.1.2 Temperature 55
11.2 IRGASON gas analyzer 56
12. References 57
Appendix A. Filter bandwidth and time delay 58
Appendix B. Sonic anemometer orientation 61
B.1 Determining true north and sensor orientation 61
B.2 Online magnetic declination calculator 62
Table of Contents - ii
1. Introduction
The IRGASON, U.S. Des. Patent No. D680455, is an in situ, open-path, mid-infrared absorption
gas analyzer integrated with a three-dimensional sonic anemometer. The gas analyzer provides
measurements of absolute densities of carbon dioxide and water vapor, while the sonic
anemometer measures orthogonal wind components.
Before using the IRGASON please study:
lPrecautions (p. 1)
lInitial inspection (p. 2)
lInstallation (p. 11)
More details are available in the remaining sections.
2. Precautions
lDANGER:
oThe scrubber bottles of all IRGASON instruments shipped prior to July 2017 contain
the strong oxidizing agents sodium hydroxide (caustic soda, NaOH) and anhydrous
magnesium perchlorate (Mg(ClO4)2). If you are handling or exchanging the scrubber
bottles (see Replacing desiccant and scrubber bottles (p. 40)), use the following
precautions. IRGASON instrument shipped after July 2017, contain a 13X molecular
sieve instead.
nAvoid direct contact with the chemicals.
nEnsure your work area is well ventilated and free of reactive compounds,
including liquid water.
nStore used chemical bottles in a sealed container until disposal.
nDispose of chemicals and bottles properly.
nSafety Data Sheets (SDS) are provided in Safety data sheets (SDS) (p. 67). SDS
are updated periodically by chemical manufacturers. Obtain current SDS at
www.campbellsci.com .
IRGASON® Integrated CO2/H2O Open-Path Gas Analyzer and 3D Sonic Anemometer 1
lWARNING:
oDo not carry the IRGASON by the arms or the strut between the arms. Always hold it
by the block, where the upper and lower arms connect.
oHandle the IRGASON carefully. The optical source may be damaged by rough
handling, especially while the analyzer is powered.
oOvertightening bolts will damage or deform the mounting hardware.
lCAUTION:
oGrounding the EC100 measurement electronics is critical. Proper grounding to earth
(chassis) will ensure maximum ESD (electrostatic discharge) protection and improve
measurement accuracy.
oDo not connect or disconnect the gas analyzer or sonic connectors while the EC100 is
powered.
oThe SDM, USB, and RS-485 output options include IRGASON diagnostic data. Be
aware that the absence of diagnostic data in the analog output option could make
troubleshooting difficult and may lead to the user not being aware of potential
problems with the instrumentation (see EC100 outputs (p. 27)).
oResting the analyzer on its side during the zero-and-span procedure may result in
measurement inaccuracy.
oWhen cleaning the gas-analyzer window, make sure the alcohol and any residual
water completely evaporate before proceeding with the zero-and-span procedure
(see Gas analyzer window cleaning (p. 34)).
3. Initial inspection
Upon receipt of the IRGASON, inspect the packaging and contents for damage. File damage
claims with the shipping company.
4. Overview
The IRGASON is an in situ, open-path, mid-infrared absorption analyzer integrated with a three-
dimensional sonic anemometer. The gas analyzer provides measurements of absolute densities
of carbon dioxide and water vapor, while the sonic anemometer measures orthogonal wind
components.
IRGASON® Integrated CO2/H2O Open-Path Gas Analyzer and 3D Sonic Anemometer 2
The IRGASON is measured and controlled by the EC100 electronics, which synchronizes gas and
wind data, essential for valid flux calculations using the eddy-covariance method. The EC100
electronics also uses inputs from an included temperature thermistor probe and a barometer.
“IRGASON” and “EC100” are often used interchangeably in this manual.
The IRGASON has been optimized for remote eddy-covariance flux applications, addressing
issues of aerodynamics, power consumption, spatial displacement, and temporal synchronicity.
Specifically, its unique design contains no obstructions surrounding the sample volume; it
operates with only 5W of power at room temperature; it has no spatial displacement between
the sample volumes of the gas analyzer and the sonic anemometer; and the EC100
synchronously samples data from the gas analyzer and sonic anemometer.
5. Specifications
5.1 Measurements
Features
lTo compute carbon dioxide and water vapor fluxes using the eddy-covariance method, the
IRGASON measures:
oabsolute carbon dioxide
owater vapor densities
othree-dimensional wind speed
osonic air temperature
oair temperature
obarometric pressure
These measurements are required to compute carbon dioxide and water vapor fluxes using the:
lStandard outputs:
oux, uy, and uzorthogonal wind components
osonic temperature (based on the measurement of c, the speed of sound)
osonic diagnostic flags
oCO2density, H2O density
IRGASON® Integrated CO2/H2O Open-Path Gas Analyzer and 3D Sonic Anemometer 3
ogas analyzer diagnostic flags
oair temperature, air pressure
oCO2signal strength, H2O signal strength
oAir temperature and air pressure are auxiliary sensor inputs
Data logger compatibility: CR6
CR1000
CR3000
CR5000
Measurement
Rate: 60 Hz
Output bandwidth1/:5, 10, 12.5, or 20 Hz
Data logger-prompted output rate: 1 to 60 Hz
Output rate1/:10, 25 or 50 Hz
Operating temperature: –30 to 50 °C
Gas analyzer
Measurement precision2/
CO2density: 0.2 mgCO2·m–3 (0.15 µmolCO2·mol–1)
H2O density: 0.00350 gH2O·m–3 (0.006 mmolH2O·mol–1)
Factory calibrated range
CO2:0 to 1000 µmolCO2·mol–1
H2O: 0 mmolH2O·mol–1 to 37 °C dewpoint
Analyzer temp: –30 to 50 °C
Baro pressure: 70 to 106 kPa
CO2performance
Zero max drift3/:±0.55 mgCO2·m–3·°C–1 (±0.3 μmolCO2·mol·°C–1)
Gain Drift: ±0.1% of reading·µmolCO2·mol–1 °C–1 (maximum)
Sensitivity to H2O: ±1.1 x 10–4 µmolCO2·mol–1 mmolH2O (max)
IRGASON® Integrated CO2/H2O Open-Path Gas Analyzer and 3D Sonic Anemometer 4
H2O performance
Zero max drift3/:±0.037 gH2O·m–3·°C–1 (±0.05 mmolH2O·mol–1·°C–1)
Gain Drift: ±0.3% of reading·mmolH2O mol–1 °C–1 (maximum)
Sensitivity to CO2:±0.1 mmolH2O·mol–1 µmolCO2–1 (maximum)
Sonic measurement precision4/
ux:1 mm·s–1
uy:1 mm·s–1
uz:0.5 mm·s–1
Sonic temperature: 0.025 °C
Sonic accuracy5/
Offset error
ux, uy:< ±8 cm·s–1
uz:< 4 cm·s–1
Gain error
Wind vector ±5° horizontal: < ±2% of reading
Wind vector ±10° horizontal: < ±3% of reading
Wind vector ±20° horizontal: < ±6% of reading
Sonic reporting range
Full scale wind: ±65.553 m/s
Sonic temperature: –50 to 60 °C
Auxiliary sensors6/
Barometer
Basic barometer
Accuracy
–30 to 0 °C: ±3.7 kPa at –30 °C, falling linearly to ±1.5 kPa at 0 °C
0 to 50 °C: ±1.5 kPa
Measurement rate: 10 Hz
IRGASON® Integrated CO2/H2O Open-Path Gas Analyzer and 3D Sonic Anemometer 5
Optional enhanced barometer
Manufacturer: Vaisala
Model: PTB110
Accuracy
–30 to 0 °C: ±0.15 kPa
Measurement rate: 1 Hz
IRGASON temperature sensor
Manufacturer: BetaTherm
Model: 100K6A1A Thermistor
Accuracy: ±0.15 °C (–30 to 50 °C)
1/ user selectable
2/ noise rms, assumes:
l25 °C
l85 kPa
l14 g·m–3 H2O
l597 mg·m–3 CO2
l20 Hz bandwidth
3/ – 30 to 50 °C
4/ noise rms
5/ assumes:
l–30 to 50 °C
lwind speed <30 m·s–1
lazimuth angles between ±170°
6/ refer to manufacturer’s product brochure or manual for details
5.2 Output signals
Features
lEC100 electronics outputs data using:
oCS SDM
oRS-4857/
IRGASON® Integrated CO2/H2O Open-Path Gas Analyzer and 3D Sonic Anemometer 6
Andere Handbücher für IRGASON
2
Inhaltsverzeichnis
Andere Campbell Messgerät Handbücher
Campbell
Campbell 247 Bedienungsanleitung
Campbell
Campbell 020C Bedienungsanleitung
Campbell
Campbell CMP3-L Bedienungsanleitung
Campbell
Campbell CR10XTCR Bedienungsanleitung
Campbell
Campbell Norsonic 140 Bedienungsanleitung
Campbell
Campbell LP02 Bedienungsanleitung
Campbell
Campbell CMP6-L Bedienungsanleitung
Campbell
Campbell 108 Bedienungsanleitung
Campbell
Campbell OTT ADC Referenzhandbuch
Campbell
Campbell CMP3 Bedienungsanleitung
Campbell
Campbell EC155 Bedienungsanleitung
Campbell
Campbell 107 Bedienungsanleitung
Campbell
Campbell Nor150 Bedienungsanleitung
Campbell
Campbell TGA200 Bedienungsanleitung
Campbell
Campbell LI200RX Bedienungsanleitung
Campbell
Campbell DataView II Bedienungsanleitung
Campbell
Campbell CS616 Bedienungsanleitung
Campbell
Campbell CNR4 Bedienungsanleitung
Campbell
Campbell SR20-T2 Bedienungsanleitung
Campbell
Campbell CS650 Bedienungsanleitung
