Canon ImageRUNNER ADVANCE C5560 Bedienungsanleitung

Troubleshooting Guide

imageRUNNER ADVANCE

C5560 Series

April, 2017

OIP Field Quality Assurance Div.

New Arrival Information

[Regarding Troubleshooting Guide]

Please be advised of the release of Troubleshooting Guide for image RUNNER ADVANCE C5560 Series.

Troubleshooting Guide is a booklet compiled from FAQs issued by Canon Inc.

[Additional case(s)]

There is no additional case at April, 2017.

Contents

Image Faults......................................................................................................... 1

Image displacement when using ADF due to broken grounding sheet...............................................1

Horizontal white line appears at 120mm from the leading edge of the sheet with a Bk halftone

image...............................................................................................................................................2

Horizontal lines with 94mm pitch on a halftone image........................................................................ 3

Image failure occurring repeatedly at the same interval (xx pitch)...................................................... 4

Faulty Feeding......................................................................................................6

Poor stacking/wrinkles/tear of paper due to inappropriate position of the aligning plate of the

processing tray unit (Inner Finisher-G1/H1).....................................................................................6

Malfunction........................................................................................................... 9

Toner leakage from the bottom of the process unit due to the spring in the shutter coming off..........9

"Insert the toner container" is displayed caused by half-insertion of the front door SW connectors.. 10

Points to note when installing the rail unit (Inner Finisher-H1).......................................................... 14

Jam (Delivery options).......................................................................................15

0211/0212/110A jam code caused by disengaged timing belt (Buffer Pass Unit).............................15

Error Code.......................................................................................................... 19

E583-8001/E583-8002 due to malfunction of the front/rear tray auxiliary guides(Staple/

Booklet Finisher_Y1)..................................................................................................................... 19

Image Faults

Copier Color | iR-ADV C5560/C5550/C5540/C5535 Series | imageRUNNER ADVANCE C5535, imageRUNNER ADVANCE C5535F,

imageRUNNER ADVANCE C5535i, imageRUNNER ADVANCE C5540, imageRUNNER ADVANCE C5540F, imageRUNNER ADVANCE

C5540i, imageRUNNER ADVANCE C5550, imageRUNNER ADVANCE C5550F, imageRUNNER ADVANCE C5550i, imageRUNNER

ADVANCE C5560, imageRUNNER ADVANCE C5560F, imageRUNNER ADVANCE C5560i

Copier Color | iR-ADV C5255/C5250/C5240/C5235 Series | iR_ADV C5235I, iR_ADV C5255, iR_ADV C5255F, iR_ADV C5255I, iR_ADV C5250,

iR_ADV C5250F, iR_ADV C5250I, iR_ADV C5240, iR_ADV C5240F, iR_ADV C5240I, iR_ADV C5235, iR_ADV C5235F, iR_ADV C5240A, iR_

ADV C5235A

Image displacement when using ADF due to broken grounding

sheet

For CE

[Symptom]

When reading single-sided pages from ADF consecutively, image displacement [a] may occur on output images.

"[b] indicates the feed direction."

[Cause]

The machine malfunction and it result in the above symptom when not properly grounded because the grounding sheet [a] located

in the stream read glass unit [1] of the reader unit is broken or torn.

[Service work]

1) Prepare a new stream read glass (FL3-4769-000) and replace the old one.

2) Output the image having shown the symptom, and check that the symptom does not occur.

If the symptom does not improve, then check other factors.

[Service part] FL3-4769-000 Stream read glass

Copier Color | iR-ADV C5560/C5550/C5540/C5535 Series | imageRUNNER ADVANCE C5535, imageRUNNER ADVANCE C5535F,

imageRUNNER ADVANCE C5535i, imageRUNNER ADVANCE C5540, imageRUNNER ADVANCE C5540F, imageRUNNER ADVANCE

C5540i, imageRUNNER ADVANCE C5550, imageRUNNER ADVANCE C5550F, imageRUNNER ADVANCE C5550i, imageRUNNER

ADVANCE C5560, imageRUNNER ADVANCE C5560F, imageRUNNER ADVANCE C5560i

Horizontal white line appears at 120mm from the leading edge of

the sheet with a Bk halftone image

For CE

[Symptom]

When a halftone image is printed out in Bk mode with the setting of Heavy 1 (106-128g/m2), a horizontal white line [a] may appear

at 120mm from the leading edge of the sheet.

The arrow [b] indicates the direction of feeding.

[Cause]

The above mentioned symptom occurs when a sheet of paper rushes into the secondary transfer roller, its impact is propagated

through the ITB to the drum and the speed of the drum fluctuated.

Due to the difference in the primary transfer engagement/disengagement operation, setting up Bk mode Heavy1 (106-128g/m2)

exposes the symptom.

[Service work]

Print out after setting Paper Settings to Heavy2 (129-150gmm2).

Copier Color | iR-ADV C5560/C5550/C5540/C5535 Series | imageRUNNER ADVANCE C5535, imageRUNNER ADVANCE C5535F,

imageRUNNER ADVANCE C5535i, imageRUNNER ADVANCE C5540, imageRUNNER ADVANCE C5540F, imageRUNNER ADVANCE

C5540i, imageRUNNER ADVANCE C5550, imageRUNNER ADVANCE C5550F, imageRUNNER ADVANCE C5550i, imageRUNNER

ADVANCE C5560, imageRUNNER ADVANCE C5560F, imageRUNNER ADVANCE C5560i

Horizontal lines with 94mm pitch on a halftone image

For CE

Symptom

Horizontal lines with 94mm pitch [a] may occur when a halftone image is output.

The arrow [b] indicates the direction of feeding.

[Reference] In this symptom, the horizontal lines may occur as bunches of plural lines[c]/diagonal lines [d] / lines with dropped

part [e].

[Cause]

The inside of main body infinitesimally vibrates when the main body is operating.

The friction force of surface of the drum becomes uneven due to the vibration which the drum gets.

Therefore the several thousand paper feeding may make the difference of shaved surface condition of the drum.

Since there are different shaved conditions on the surface of the drum, uneven potential is generated at the each point and then

cause the foregoing symptom.

The shaved condition on the drum surface becomes even gradually with the advancement of life of the drum, and then the

symptom will be improved.

[Service work]

1) Select Settings/Registration > Adjustment/Maintenance > Maintenance > Clean Inside Main unit, and press "Start" button.

[Reference] The cleaning takes about 130 sec.

2) Output the image having shown the symptom, and check that the symptom does not occur.

If the improvement of the symptom is not sufficient, a couple of implementations of Procedure 1) are required.

3) Output the image having shown the symptom, and check that the symptom does not occur.

If the symptom does not improve, check other causes.

Copier Color | iR-ADV C5560/C5550/C5540/C5535 Series | imageRUNNER ADVANCE C5535, imageRUNNER ADVANCE C5535F,

imageRUNNER ADVANCE C5535i, imageRUNNER ADVANCE C5540, imageRUNNER ADVANCE C5540F, imageRUNNER ADVANCE

C5540i, imageRUNNER ADVANCE C5550, imageRUNNER ADVANCE C5550F, imageRUNNER ADVANCE C5550i, imageRUNNER

ADVANCE C5560, imageRUNNER ADVANCE C5560F, imageRUNNER ADVANCE C5560i

Image failure occurring repeatedly at the same interval (xx pitch)

For CE

[Symptom]

Repeating image failure [a] whose intervals are same pitch may occur.

The arrow [b] indicates the direction of feeding.

[Cause]

The image failure occurs when rollers have foreign matters or flaws.

[Service work]

Check the rollers or Belts of a) to j) below.

No Interval (xx pitch) Parts Parts No

a 34.9mm Developing Cylinder

FM1-N370 (DEVELOPING ASSEMBLY, Y)

FM1-N371 (DEVELOPING ASSEMBLY, M)

FM1-N372 (DEVELOPING ASSEMBLY, C)

FM1-N373 (DEVELOPING ASSEMBLY, BK)

b 94.2mm Photosensitive Drum Drum Unit

c 44.0mm Charging Roller Drum Unit

d 55.0mm Primary Transfer Roller FC0-0257

e 50.3mm Secondary Transfer Inner Roller FL0-4164

f 77.7mm Secondary Transfer Roller FE4-8322

g 893.1mm ITB FM1-N265

h 101.7mm ITB Drive Roller FC8-4403

i 94.2mm Fixing Film

FM1-N253 (100V : Film Assembly)

FM1-N254 (120V : Film Assembly)

FM1-N255 (230V : Film Assembly)

j 94.2mm Fixing Pressure Roller FM1-N252 (Pressure Roller Kit)

a) When the interval is 34.9 mm pitch, check Developing Cylinder [a] in Developing Assembly (FM1-N370/-N371/-N372/-N373).

b) When the interval is 94.2 mm pitch, check Drum [b].

[Note] If the failure occurs in all the colors, checkFixing Film [i] or Fixing Pressure Roller [j].

c) When the interval is 44 mm pitch, check Charging Roller [c] of the Drum Unit.

d) When the interval is 55.0 mm pitch, check Primary Transfer Roller [d] (FC0-0257).

e) When the interval is 50.3 mm pitch, check Secondary Transfer Inner Roller [e] (FL0-4164).

f) When the interval is 77.7 mm pitch, check Secondary Transfer Roller [f] (FE4-8322).

g) When the interval is 893.1 mm pitch, check ITB (Intermediate Transfer Belt) [g] (FM1-N265).

[Note] When the paper whose size is A3 or 11x17 is used, the image failure occurs at a frequency of once in 2 sheets.

h) When the interval is 101.7 mm pitch, check ITB Drive Roller [h] (FC8-4403).

i) When the interval is 94.2 mm pitch, check Fixing Film [i] in Film Assembly (FM1-N253/-N254/-N255).

[Note] If the failure occurs only for any color of Y/M/C/BK, check Photosensitive Drum of the Drum unit.

j) When the interval is 94.2 mm pitch, check Fixing Pressure Roller [j] in Pressure Roller Kit (FM1-N252).

[Note] If the failure occurs only for any color of Y/M/C/BK, check Photosensitive Drum of the Drum unit.

Faulty Feeding

Copier Color | iR-ADV C3330/C3325/C3320 Series | imageRUNNER ADVANCE C3320F, imageRUNNER ADVANCE C3320i, imageRUNNER

ADVANCE C3320, imageRUNNER ADVANCE C3320L, imageRUNNER ADVANCE C3325, imageRUNNER ADVANCE C3325i, imageRUNNER

ADVANCE C3330, imageRUNNER ADVANCE C3330F, imageRUNNER ADVANCE C3330i

Copier Color | iR-ADV C5560/C5550/C5540/C5535 Series | imageRUNNER ADVANCE C5535, imageRUNNER ADVANCE C5535F,

imageRUNNER ADVANCE C5535i, imageRUNNER ADVANCE C5540, imageRUNNER ADVANCE C5540F, imageRUNNER ADVANCE

C5540i, imageRUNNER ADVANCE C5550, imageRUNNER ADVANCE C5550F, imageRUNNER ADVANCE C5550i, imageRUNNER

ADVANCE C5560, imageRUNNER ADVANCE C5560F, imageRUNNER ADVANCE C5560i

Poor stacking/wrinkles/tear of paper due to inappropriate position

of the aligning plate of the processing tray unit (Inner Finisher-G1/

H1)

For CE

[Symptom]

When taking copy with single sheet output using inner finisher, this may lead to a poor stacking [A] or wrinkles/tear [B] at the

center of the trailing edge of paper due to unfinished delivery of paper to the tray.

The arrow [a] indicates the direction of feeding.

[Cause]

A poor adjustment of the aligning plate of the processing tray unit encumbers a proper delivery of paper and this ends in the

aforementioned symptom.

[Service work]

When the above mentioned symptom has occurred, adjust the width of the aligning plate following the procedure below.

1) Select the paper to be set in the processing tray unit from Service Mode.

In case of A4 size : Service mode > SORTER > ADJUST > INF-ALG1

In case of LTR size : Service mode > SORTER > ADJUST > INF-ALG2

[Note] The paper size used for the width adjustment of the alignment plate is A4 size or LTR size.

2) Enter -50 in the section for entering the adjusted value [a] of the target paper and press OK [b] (the image below is the case

of A4)

[Note] This operation stops the alignment plate at the alignment position +5.0mm.

3) Set one sheet of paper [1] in the processing tray unit, fit it to the edge [b] of the rear alignment plate [2], and then measure the

gap [a] between the edge of the front alignment plate [3] and the paper with a scale.

[Note] Since the alignment plate is installed a bit tilting toward the delivery direction, set the paper to be fitted to the edge (on the

delivery side).

4) Enter the gap value measured in the above step 3) in the calculation formula below, enter the calculated adjusted value [a]

and press OK [b].

Adjusted value = gap (mm) x 10 - 50

[Note] Correspondence table of measured gap value and adjusted value.

Gap mm (measured value) adjusted value

2.0 - 30

Andere Handbücher für imageRUNNER ADVANCE C5560

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Multifunktionsdrucker Handbücher

Canon

Canon Pixma MP800R Bedienungsanleitung

Canon

Canon imagePROGRAF TX-4000 Einrichtungshandbuch

Canon

Canon imageRUNNER 6020 Series Bedienungsanleitung

Canon

Canon imageRUNNER 7200 Bedienungsanleitung

Canon

Canon IMAGERUNNER 1610 Bedienungsanleitung

Canon

Canon PIXMA MX452 Bedienungsanleitung

Canon

Canon 1238iF II Bedienungsanleitung

Canon

Canon PIXMA MP810 Bedienungsanleitung

Canon

Canon FY8-13HW-000 Bedienungsanleitung

Canon

Canon imageCLASS D1650 Bedienungsanleitung

Canon

Canon ImageCLASS MF5730 Benutzerhandbuch

Canon

Canon MG5200 series Bedienungsanleitung

Canon

Canon MultiPASS F50 Bedienungsanleitung

Canon

Canon PIXMA MG3220 series Bedienungsanleitung

Canon

Canon PIXMA MX850 Bedienungsanleitung

Canon

Canon imagePROGRAF TX-2000 Betriebsanleitung

Canon

Canon PIXMA MG5450 Bedienungsanleitung

Canon

Canon imageRUNNER 3300E Bedienungsanleitung

Canon

Canon imageCLASS D1150 Bedienungsanleitung

Canon

Canon imageRUNNER ADVANCE C5255 Bedienungsanleitung

Canon

Canon PIXMA MG5600 Series Bedienungsanleitung

Canon

Canon imageCLASS MF4880dw Sicherheitsleitfaden

Canon

Canon PIXMA MX300 Bedienungsanleitung

Canon

Canon ImageCLASS MF4690 Installations- und Betriebshandbuch

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung

Canon imageRUNNER ADVANCE C5560 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken