Canon PIXMA MP990 Montage- und Wartungsanleitung

Installing Your Multifunction

to Your Network for the First Time

PIXMA MP990 / PIXMA MP640 / PIXMA MP560

Mac OS

Navigation Tips for Macintosh Users

To navigate this guide, please use the arrows on the MAC

keyboard or use the PAGE UP and Page DOWN keys.

Page UP

Page DOWN

LEFT

DOWN

RIGHT

Installing Your Multifunction

to Your Network for the First Time

PIXMA MP990 / PIXMA MP640 / PIXMA MP560

Mac OS

Preparing to Connect My Multifunction to My Network 4

Network Requirements 4

Important Information You Need Before Adding Your Multifunction 5

Adding Your Multifunction to the Network 6

Confirm Connection Status 10

Downloading & Installing the Drivers 13

Download ingthe Driver 13

Installing the Driver 16

Adding the Machine 22

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is

complete, and that the computer is connected to the network.

Notes on Network Connection

•The configuration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to your device's instruction manual or contact its manufacturer.

•The machine cannot be used over a wireless and wired connection at the same time.

Wireless Connection

Connect to your network environment over a wireless connection.

Preparing to Connect My Multifunction

To My Network

Preparing to Connect My Multifunction

To My Network

Be sure to prepare an access point.

Important Information You Need Before Adding Your Multifunction

The following information is required to connect to your access point or router.

•Access Point Name/Network Name:

Also referred to as SSID. A name to identify the specific access point.

•Network Key:

Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key.

A password required to set to prevent unauthorized access to communication.

Check your access point or router for the following information, and then write it down.

NOTE: For details on how to check the following information, refer to the manual of your access point or router, or contact its manufacturer.

An "Ad-hoc connection," which establishes a direct

connection to the computer over a wireless connection

without using an access point, is not supported.

Adding Your Multifunction to Your Network

Step One

Use the Easy-Scroll Wheel* (A) to select Settings, and

then press the OK button.

*Easy-Scroll Wheel location varies according to model.

MP640 pictured in examples below.

Step Two

Select Wireless LAN setup, and then press the OK button.

Adding Your Multifunction to Your Network

Step Four

Select Easy settings, and then press the OK button.

Step Three

Select Yes, then press the OK button.

When wireless connection is enabled, the Wi-Fi lamp**

(B) lights blue.

**Wi-Fi lamp location varies according to model.

Step Six

When one of the following screens is displayed, enter the network

key you wrote down, then press the OK button.

If the following screen is not displayed, go to Step Eight.

Use the Easy-Scroll Wheel to select the character. Use the button

to move the cursor to the right.

IMPORTANT: Enter upper and lower case letters of the alphabet

correctly.

Adding Your Multifunction to Your Network

Step Five

Select the access point name you wrote down, then

press the OK button.

NOTE: If you are living in an apartment, nearby access

points in use may be detected.

Adding Your Multifunction to Your Network

Step Eight

When the completion screen appears, press the OK button, then

press the HOME*** button (C).

***HOME button location varies depending on model.

The standby screen returns.

NOTE: If Failed to connect to the access point. appears, press the OK

button, make sure that the network key is correct, then enter it again. If a

connection still cannot be established, refer to the printed manual: Network

Setup Troubleshooting.

Step Seven

Make sure that the network key is correct, and

then press the OK button.

Step One

Press the HOME*** button (A), select Settings using the

Easy-Scroll Wheel (B), and then press the OK button.

***HOME button location varies depending on model.

IMPORTANT: Confirm connection status after installing

the machine in the target location.

Adding Your Multifunction to Your Network

Confirm Connection Status

Step Two

Select Device settings, and then press the OK button.

Andere Handbücher für PIXMA MP990

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Multifunktionsdrucker Handbücher

Canon

Canon PIXMA MP610 Series Bedienungsanleitung

Canon

Canon imageRUNNER ADVANCE C9280 PRO Bedienungsanleitung

Canon

Canon MB2100 Series Einrichtungshandbuch

Canon

Canon MultiPASS F50 Montage- und Wartungsanleitung

Canon

Canon imageCLASS MF4450 Sicherheitsleitfaden

Canon

Canon MB5000 Series Einrichtungshandbuch

Canon

Canon Color imageRUNNER C2880 Bedienungsanleitung

Canon

Canon PIXMA MX700 Series Bedienungsanleitung

Canon

Canon 2711B019AB Bedienungsanleitung

Canon

Canon MG5200 series Bedienungsanleitung

Canon

Canon Color imageRUNNER LBP5360 Bedienungsanleitung

Canon

Canon PIXMA MG5420 Bedienungsanleitung

Canon

Canon imageCLASS MF5630 Bedienungsanleitung

Canon

Canon PIXMA MX925 Series Bedienungsanleitung

Canon

Canon imageRUNNER 2202N Bedienungsanleitung

Canon

Canon PIXMA MP160 Bedienungsanleitung

Canon

Canon PIXMA MX350 Bedienungsanleitung

Canon

Canon PIXMA MX727 Referenzhandbuch

Canon

Canon Color imageRUNNER C1022 Bedienungsanleitung

Canon

Canon iPF5100 - imagePROGRAF Color Inkjet Printer Bedienungsanleitung

Canon

Canon imageCLASS D1120 Bedienungsanleitung

Canon

Canon imageRUNNER 5075 Bedienungsanleitung

Canon

Canon PIXMA MP228 Bedienungsanleitung

Canon

Canon imageRUNNER 7200 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung