Canon PIXMA MX420 Series Bedienungsanleitung

Installing Your Multifunction

to Your Network for the First Time

PIXMA MX420

Mac OS

Navigation Tips for Macintosh Users

To navigate this guide, please use the arrows on the MAC

keyboard or use the PAGE UP and Page DOWN keys.

Page UP

Page DOWN

LEFT

DOWN

RIGHT

Installing Your Multifunction

to Your Network for the First Time

PIXMA MX420

Mac OS

Preparing to Connect My Multifunction to My Network 4

Network Requirements 4

Important Information You Need Before Adding Your Multifunction 5

Adding Your Multifunction to Your Network 6

Installing the Drivers & Software 10

Registering the Printer & Scanner 17

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is

complete, and that the computer is connected to the network.

Notes on Network Connection

•The configuration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to your device's instruction manual or contact its manufacturer.

•The machine cannot be used over a wireless and wired connection at the same time.

Wireless Connection

Connect to your network environment over a wireless connection.

Preparing to Connect My Multifunction

To My Network

Preparing to Connect My Multifunction

To My Network

Be sure to prepare an access point.

Important Information You Need Before Adding Your Multifunction

The following information is required to connect to your access point or router.

•Access Point Name/Network Name:

Also referred to as SSID. A name to identify the specific access point.

•Network Key:

Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key.

A password required to set to prevent unauthorized access to communication.

Check your access point or router for the following information, and then write it down.

NOTE: For details on how to check the following information, refer to the manual of your access point or router, or contact its manufacturer.

An "Ad-hoc connection," which establishes a direct

connection to the computer over a wireless connection

without using an access point, is not supported.

Adding Your Multifunction to Your Network

Step One

Press the Setup button (A)

Step Two

Select Wireless LAN setup, and then press the OK button.

Adding Your Multifunction to Your Network

Step Four

Select Easy setup, and then press the OK button.

Step Three

Select Yes, then press the OK button.

When wireless connection is enabled, the Wi-Fi lamp (D)

lights blue.

Step Five

Select the access point name, then press the OK button.

NOTE: If you are living in an apartment, nearby access

points in use may be detected.

Step Six

When one of the following screens is displayed, enter the network

key using the Numeric buttons (E), then press the OK button.

If the following screen is not displayed, go to step 8

Press the button to switch character entry modes.

Network key entry is case-sensitive.

Be sure to enter upper and lower case letters of the alphabet

correctly

Adding Your Multifunction to Your Network

Step Eight

When the connected to the access point screen appears, press the

OK button.

The Setup menu screen returns.

NOTE: If Failed to connect to the access point. appears, press the OK

button, make sure that the network key is correct, then enter it again. If a

connection still cannot be established, refer to the printed manual:

Network Setup Troubleshooting.

Adding Your Multifunction to Your Network

Step Seven

Make sure that the network key is correct, and then

press the OK button.

Installing the Drivers & Software

To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The

installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of applications

to be installed.)

Installing the Drivers & Software

Step One

Turn on the computer, then insert the Setup

CDROM into the CD-ROM drive

Step Two

Double-click the Setup icon of the CD-ROM folder to proceed to the

following screen.

If the CD-ROM folder does not open automatically, double-click the

CD-ROM icon on the desktop.

Andere Handbücher für PIXMA MX420 Series

Inhaltsverzeichnis

Andere Canon Multifunktionsdrucker Handbücher

Canon

Canon imageClass MF5650 Bedienungsanleitung

Canon

Canon imageRUNNER 5570 Bedienungsanleitung

Canon

Canon imageCLASS D340 Bedienungsanleitung

Canon

Canon MB2700 series Einrichtungshandbuch

Canon

Canon PIXMA TS5055 Einrichtungshandbuch

Canon

Canon imageRUNNER 1025 Montageanleitung

Canon

Canon imagePROGRAF TX-4000 Einrichtungshandbuch

Canon

Canon PIXMA TS8300 Series Bedienungsanleitung

Canon

Canon G4000 series Einrichtungshandbuch

Canon

Canon 1238iF II Bedienungsanleitung

Canon

Canon MF515 Series Bedienungsanleitung

Canon

Canon iR3245 Produktinformationsblatt

Canon

Canon MX530 series Einrichtungshandbuch

Canon

Canon Pixma MP800R Bedienungsanleitung

Canon

Canon PIXMA MX310 series Bedienungsanleitung

Canon

Canon imageRUNNER 3530 Bedienungsanleitung

Canon

Canon PIXMA MG55500 Einrichtungshandbuch

Canon

Canon MF7280 - ImageCLASS B/W Laser Bedienungsanleitung

Canon

Canon 330 Bedienungsanleitung

Canon

Canon MF635Cx Series Bedienungsanleitung

Canon

Canon MP360 SERIES Bedienungsanleitung

Canon

Canon mg6400 series Einrichtungshandbuch

Canon

Canon imageRUNNER 2645i Bedienungsanleitung

Canon

Canon imageRUNNER ADVANCE 715iZ III Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung