Canon RF 14-35mm F4 L IS USM Bedienungsanleitung

ENG

Instructions

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Canon RF 14-35mm

f/4L IS USM o cerca il tuo prodotto tra le migliori offerte di Obiettivi per Fotocamere

ENG-1

Thank you for purchasing a Canon product.

Canon RF14-35mm F4 L IS USM is a wide

zoom lens for use with EOS R series cameras.

z“IS” stands for Image Stabilizer.

z“USM” stands for Ultrasonic Motor.

Conventions used in these instructions

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

Camera Firmware and

Camera Applications

Please use the latest versions of firmware and

applications with the camera in use. For details on

whether the firmware and applications in use are the

latest version or not, and for details on updating them,

please check the Canon website.

If the camera’s* firmware is not a compatible

version, the following limitations will apply.

zMagnified view functionality is not available.

zIn some cases, the camera malfunction may

occur.

* Applies to the following camera models:

EOS R and EOS RP

ENG-2

Precautions to ensure that the camera is used

safely. Read these precautions thoroughly. Make

sure all details are observed in order to prevent

risks and injury to the user and other people.

Warning

Details pertaining to risks that may

result in death or serious injury.

zDo not look directly at the sun or other strong

light sources through a lens. This may result in

loss of sight.

zDo not leave a lens in the sun without the lens

cap attached. The lens may concentrate entering

sunlight and cause a malfunction or fire.

Caution

Details pertaining to risks that may

result in injury or damage to other

objects.

zDo not leave the product in places exposed to

extremely high or low temperatures. The product

may cause burns or injury when touched.

Safety Precautions

ENG-3

Handling Precautions

zDo not leave the product in excessive heat such as

in a car in direct sunlight. High temperatures can

cause the product to malfunction.

zIf the lens is taken from a cold environment into a

warm one, condensation may develop on the lens

surface and internal parts. To prevent condensation

in this case, first put the lens into an airtight

plastic bag before taking it from a cold to warm

environment. Then take out the lens after it has

warmed gradually. Do the same when taking the

lens from a warm environment into a cold one.

zIn order to optimize aperture control, there are

occasions in which the aperture blades will move

during zooming and focusing, even when the

aperture value is set for aperture-priority AE or

manual exposure, etc.

zPlease also read any lens related handling

precautions listed in your camera’s instruction

manual.

General Precautions

ENG-4

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such

changes or modifications should be made, you could be

required to stop operation of the equipment.

This equipment has been tested and found to comply with

the limits for a class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

CAN ICES-3 (B) / NMB-3 (B)

ENG-5

Focusing ring (→ 7)

Control ring (→ 8)

Hood mount (→ 11)

Filter mounting thread (→ 12)

Focus mode switch (→ 7)

Image stabilizer switch (→ 9)

Zoom ring (→ 7)

Rubber ring (→ 6)

Contacts (→ 6)

Lens mount (→ 6)

Lens mount index (→ 6)

Zoom position index (→ 7)

z For detailed information, reference page numbers are provided in parentheses (→ **).

Nomenclature

ENG-6

Lens mount index

Lens release button Dust cap

Attaching the Lens

Align the lens mount indexes of the lens and

camera, and turn the lens clockwise until you

hear a click.

Detaching the Lens

Turn the lens counterclockwise while pressing

the camera’s lens release button. Detach the

lens once it has stopped turning.

Please refer to the camera's instructions for

details.

zSet the camera’s power switch to OFF when

attaching or detaching the lens.

zAttach the lens cap before detaching the lens

from the camera.

zAfter detaching the lens, place the lens with the

rear end up and attach the dust cap to prevent

the lens surface and contacts from getting

scratched. Make sure the lens and dust cap

mount indexes are aligned when attaching the

dust cap.

zContacts that are scratched, soiled, or have

fingerprints on them may result in faulty

connections or corrosion, which may lead to

malfunctions. If the contacts get soiled, clean

them with a soft cloth.

zThe lens mount has a rubber ring to improve

dust-resistance and water-resistance

performance. This rubber ring may cause

friction marks to appear around the camera’s

lens mount, although this will have no effect on

usage.

zRubber rings can be replaced at Canon Service

Center. (chargeable)

1. Attaching and Detaching the Lens

ENG-7

Setting the Focus Mode

3. Zooming

To zoom, turn the lens’ zoom ring.

zBe sure to finish zooming before focusing.

Zooming after focusing can affect the focus.

zBlurring may temporarily occur if the zoom ring is

quickly turned.

Focusing ring

Focus mode switch

To shoot in autofocus (AF) mode, set the focus

mode switch to AF.

To use only manual focusing (MF), set the focus mode

switch to MF, and focus by turning the focusing ring.

zQuickly turning the focusing ring may result in

delayed focus.

zThe lens’ focusing ring is electronic.

When AF operation is set to [ONE SHOT],

manual focus is possible after autofocusing

has been completed by continuing to press the

shutter button halfway. However, the camera

settings need to be changed. Please refer to the

camera's instructions for details.

ENG-8

The control ring can be assigned the functions

that are commonly used with cameras, such as

shutter speed and aperture settings.

Control ring

The click action of the control ring allows you to

have a sense of how much it is being turned.

Please refer to the camera’s instructions for

details on how to use the control ring.

zThere are cases in which the sound of control

ring operations may be recorded when shooting

movies.

zThe clicking sensation of the control ring can

be removed by the Canon Service Center.

(chargeable)

4. Control Ring

ENG-9

Set the image stabilizer switch to ON when you

want to use the Image Stabilizer.

zThis function provides image stabilization

appropriate for shooting conditions (such as

shooting still subjects and panning shots).

zThe Image Stabilizer will work in combination

with cameras with in-body Image Stabilizer.

zSet the image stabilizer switch to OFF when

you are not going to use the Image Stabilizer.

5. Image Stabilizer

zThe Image Stabilizer cannot compensate for a

blurred shot caused by a subject that moved.

zThe Image Stabilizer may not be fully effective if

you shoot from a violently shaking vehicle or other

transportation.

zWhen using a tripod, it is recommended that you

set the image stabilizer switch to OFF.

zEven with a monopod, the Image Stabilizer will

be as effective as during hand-held shooting.

However, depending on the shooting conditions,

there are cases in which the Image Stabilizer

effect may be less effective.

Inhaltsverzeichnis

Andere Canon Kamerazubehör Handbücher

Canon

Canon VFL-2 Bedienungsanleitung

Canon

Canon POWER WINDER A2 Bedienungsanleitung

Canon

Canon WFT-E7 Bedienungsanleitung

Canon

Canon TIMER REMOTE CONTROLLER TC-80N3 Bedienungsanleitung

Canon

Canon Easydive Leo3 Bedienungsanleitung

Canon

Canon LM-V1 Bedienungsanleitung

Canon

Canon motor drive mf Bedienungsanleitung

Canon

Canon Speedlite 299T Bedienungsanleitung

Canon

Canon F-1 Bedienungsanleitung

Canon

Canon Film Chamber 250 Bedienungsanleitung

Canon

Canon EF 25 Bedienungsanleitung

Canon

Canon Macro Twin Light MT-26EX-RT Montageanleitung

Canon

Canon VI-L Bedienungsanleitung

Canon

Canon DU-82 Bedienungsanleitung

Canon

Canon BU-47H 1AM Bedienungsanleitung

Canon

Canon Extender EF 1.4x II Bedienungsanleitung

Canon

Canon EF 600mm 1:4.0 L USM Bedienungsanleitung

Canon

Canon EXTENDER EF 2.0x Bedienungsanleitung

Canon

Canon EOS C300 Bedienungsanleitung

Canon

Canon RF85/1.2 L USM Bedienungsanleitung

Canon

Canon PD-82K Bedienungsanleitung

Canon

Canon SPEEDLITE 270EX II Bedienungsanleitung

Canon

Canon BG-E7 Bedienungsanleitung

Canon

Canon RECEIVER LC-4R Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung

Custom Brackets

Custom Brackets Digital PRO-M Bedienungsanleitung

Vivo

Vivo MOUNT-LT01C Bedienungsanleitung