Canon EF 400mm f/4 DO IS USM Bedienungsanleitung

EF400mm f/4 DO IS II USM

Instructions

ENG

COPY

ENG-1

Thank you for purchasing a Canon product.

Canon’s EF400mm f/4 DO IS II USM is a high-

performance super telephoto lens, for use with EOS

cameras, which includes a newly-developed DO lens

(Gapless Dual-Layer Diffractive Optical Element) and

is designed to be compact and lightweight.

 “DO” stands for Diffractive Optics.

 “IS” stands for Image Stabilizer.

 “USM” stands for Ultrasonic Motor.

Features

1. An optimal combination of DO elements

providing good compensation of chromatic

aberration and an aspherical element

providing good compensation of aberrations,

giving superior deﬁnition as well as achieving

compactness.

2. The Image Stabilizer gives the equivalent effect

of a shutter speed 4 stops* faster (when using

an EOS-1D X).

Also, a third Image Stabilizer mode effective for

shooting irregularly moving subjects.

3. SWC (Subwavelength Structure Coating)

reduces ﬂare and ghosting.

4. Using a ﬂuorine coating on the foremost and

rearmost lens surfaces allows adhered dirt to be

removed more easily than before.

5. Ultrasonic motor (USM) for fast, quiet autofocus.

6. Manual focusing is available after the subject

comes into focus in autofocus mode (ONE SHOT

AF).

7. An AF stop button to pause autofocus whenever

desired.

8. A power focus mode enables smooth focus

change.

9. A focus preset function for advance storage

of focusing positions in memory to allow

instantaneous focusing.

10.Can be used with EF1.4× III/EF2× III extenders.

11.Attachment slot provided for wire-type security

lock, located under the cover for the orientation

locking knob.

12.Tight seal structure provides excellent dustproof

and drip-proof performance. However, it is unable

to provide complete protection from dust and

moisture.

13.Designed for lighter weight with parts made of

magnesium alloy.

* Based on CIPA (Camera & Imaging Products

Association) standards.

COPY

ENG-2

Safety Precautions

 Do not look at the sun or a bright light source

through the lens or camera. Doing so could result in

loss of vision. Looking at the sun directly through the

lens is especially hazardous.

 Do not point the lens or camera at the sun or

photograph it. This is because the lens concentrates

the sun’s rays even when the sun is outside the image

area or when shooting with backlight, which could cause

malfunction or ﬁre.

 Whether it is attached to the camera or not, do not

leave the lens under the sun without the lens cap

attached. This is to prevent the lens from concentrating

the sun’s rays, which could cause a ﬁre.

 When the lens is mounted on a camera, be sure to also

hold the camera by the lens, including when mounting

on a tripod. Only holding by the camera could result in

scratches on the camera body or the lens itself. The lens

may also detach from its mount and fall, causing injury.

 Do not use a strap attached to the camera.The mount

may break, resulting in the lens falling off and causing

injury or in scratches on the camera. Be sure to use the

camera with a dedicated strap attached correctly to the

strap mount on the lens. (Refer to “Attaching the strap”.)

 Do not stand on top of the lens case.You may fall and

injure yourself.

 Do not pile lens cases on top of one another as they

may fall and cause injury.

Conventions used in this instruction

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

Handling Cautions

 If the lens is taken from a cold environment into a

warm one, condensation may develop on the lens

surface and internal parts. To prevent condensation

in this case, ﬁrst put the lens into an airtight plastic bag

before taking it from a cold to warm environment.Then

take out the lens after it has warmed gradually. Do the

same when taking the lens from a warm environment

into a cold one.

 Do not leave the lens in excessive heat such as in a car

in direct sunlight. High temperatures can cause the

lens to malfunction.

COPY

ENG-3

Shooting Precautions

As a characteristic of the diffractive optics with this lens,

colored ﬂare may occasionally appear around the light

source depending on shooting conditions.

 For scenes where a light source is inside the screen,

colored ﬂare may occasionally appear as a halo of light

around the light source or appear fanning out from the

light source.

 For scenes where a light source is outside the screen,

colored ﬂare may occasionally appear partially inside

the screen.You can reduce or prevent these issues

with the following steps according to the scene you are

shooting.

• Attach a lens hood.

• Use your hand or paneling, an umbrella, etc. to block

the light source and placed so that they do not appear

in the screen.

Usage Precautions

 When using this lens, please check the Canon website

for the latest camera ﬁrmware. If the camera’s ﬁrmware

is not the latest version, be sure to update to the latest

ﬁrmware.

 For details on updating ﬁrmware, please check the

Canon website.

COPY

ENG-4

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Do not make any changes or modiﬁcations to the equipment

unless otherwise speciﬁed in the instructions. If such changes

or modiﬁcations should be made, you could be required to

stop operation of the equipment.

This equipment has been tested and found to comply with

the limits for a class B digital device, pursuant to part 15

of the FCC Rules.These limits are designed to provide

reasonable protection against harmful interference in a

residential installation.This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Safety Precautions

CAN ICES-3(B)/NMB-3(B)

COPY

ENG-5

Nomenclature

 For detailed information, reference page numbers are provided in parentheses (→**).

Distance scale (→ 15)

Orientation locking knob (→18)

Security slot (covered) (→18)

Strap mount (→6)

Focus mode switch (→7)

Contacts (→6)

Lens mount index (→6)

Drop-in ﬁlter (→19)

Image stabilizer mode selector switch (→12)

Focus preset switch (→9)

Focusing distance range

selector switch (→7)

Tripod mount (→18)

Focus preset button (→9)

Image stabilizer switch (→ 12)

Rubber ring (→6)

AF stop button

(→8)

Hood mount (→15)

Playback ring

(→10)

Focusing ring (→7)

COPY

ENG-6

1. Mounting and Detaching the Lens

See your camera’s instructions for details on

mounting and detaching the lens. The lens mount has a rubber ring for enhanced

dust- and water-resistance.The rubber ring may

cause slight abrasions around the camera’s lens

mount, but this will not cause any problems. If the

rubber ring becomes worn, it is replaceable by a

Canon Service Center at cost.

Attaching the strap

Thread the end of the strap through the strap

mount on the lens and then back through the

clasp on the strap. Pull the strap tight and check

that there is no slack in the clasp.

 After detaching the lens, place the lens with

the rear end up to prevent the lens surface and

contacts from getting scratched.

 If the contacts get soiled, scratched, or have

ﬁngerprints on them, corrosion or faulty

connections can result.The camera and lens

may not operate properly.

 If the contacts get soiled or have ﬁngerprints on

them, clean them with a soft cloth.

 If you remove the lens, cover it with the dust cap.

To attach it properly, align the lens mount index

and the index of the dust cap as shown in

the diagram, and turn clockwise.To remove it,

reverse the order.

COPY

ENG-7

Switching the Focusing

Distance Range

Ranges

FULL

(3.3 m/10.83 ft. - ∞)

3.3 m/10.83 ft. – 8 m/26.25 ft.

8 m/26.25 ft. - ∞

Setting the Focus Mode

After autofocusing in ONE SHOT AF mode, focus

manually by pressing the shutter button halfway

and turning the focusing ring. (Full-time manual

focus)

 To shoot in autofocus (AF) mode, set the focus

mode switch to AF.

 To shoot in manual focus (MF) mode, set the

focus mode switch to MF, and focus by turning

the focusing ring.The focusing ring always

works, regardless of the focus mode.

 To shoot in power focus (PF) mode, set the

focus mode switch to PF when the focus

preset switch (p. 9) is at OFF. For detailed

information, see “6. Power Focus (PF) Mode”

(p. 11).

You can set the focusing distance range with a

switch. By setting a suitable focusing distance

range, the actual autofocusing time will be

shorter.

COPY

ENG-8

4. AF Stop Button

The AF stop function also works in AI Servo AF

mode.

Angle positioning of the AF stop button is

adjustable by a Canon Service Center at cost.

 With the EOS 630/600, RT, A2/A2E/5, or 10S/10

set to the AI Servo AF mode and continuous

shooting, AF will not resume even after you

let go of the AF stop button. Press the shutter

release button halfway to resume AF.

 With the EOS A2/A2E/5 and 10S/10 set to the

Sports mode, AF will not resume even after you

let go of the AF stop button. Press the shutter

release button halfway to resume AF.

 You can change the functions of the AF stop

button using the camera’s Custom Function. For

details, please refer to the camera’s instructions.

During autofocus operation, you can press the

AF stop button to temporarily pause autofocus.

If the shutter button is still pressed halfway when

the AF stop button is released, autofocusing will

continue as before.

COPY

ENG-9

5. Focus Preset

By presetting any focusing distance, you can instantly focus at that point even while you are

shooting a different subject.This function operates in any of the AF, PF, and MF modes.

< How to Set >

Press the focus preset

button.

 The focused distance will be

preset.

 If the focus preset switch was

set to , the beeper will

sound once.

Press the shutter button

halfway or turn the focusing

ring to focus the distance

you want to preset.

Set the focus preset switch

to ON or .

COPY

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon KJ10EX4.5B IRSE Bedienungsanleitung

Canon

Canon EF-S10-18mm f/4.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF-S 18-13Smm f Bedienungsanleitung

Canon

Canon EF 100-400mm f/4.5-5.6L IS USM Bedienungsanleitung

Canon

Canon 9519B008AA Bedienungsanleitung

Canon

Canon EOS 5D Mark IV + 70-200mm Bedienungsanleitung

Canon

Canon EF200 mm Bedienungsanleitung

Canon

Canon KH21ex5.7 IRSE Bedienungsanleitung

Canon

Canon EF35mm f/1.4L USM Bedienungsanleitung

Canon

Canon CN7x17 KAS S/E1 Bedienungsanleitung

Canon

Canon EF-S18-55mm f/3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF 24mm f/2.8 IS USM Bedienungsanleitung

Canon

Canon RF 24mm F1.8 MACRO IS STM Bedienungsanleitung

Canon

Canon EF 17-35mm 1:2.8 L USM Bedienungsanleitung

Canon

Canon EF28-135mm f/3.5-5.6 IS USM Bedienungsanleitung

Canon

Canon EF-555-250mm f/4-5.6 IS STM Bedienungsanleitung

Canon

Canon EF40mm f/2.8 STM Bedienungsanleitung

Canon

Canon EF 100mm f/2.8 Macro USM Bedienungsanleitung

Canon

Canon EF50mm f/1.0L USM Bedienungsanleitung

Canon

Canon EF 28mm 1:2.8 Bedienungsanleitung

Canon

Canon EF-S18-135mm f/3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF24-70mm f/2.8L USM Bedienungsanleitung

Canon

Canon EF-S 55-250mm f/4-5.6 IS Bedienungsanleitung

Canon

Canon EF-M15-45mm F3.5-6.3 IS STM Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Panasonic

Panasonic LUMIX G X Vario 45-175mm f/4.0-5.6 Bedienungsanleitung

Nikon

Nikon AF-S VR 24-120 f/3.5-5.6G IF-ED Bedienungsanleitung

Rokinon

Rokinon DS50M-C Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung