Canon EF 70-300mm f/4.5-5.6 IS USM Bedienungsanleitung

EF70-300mm f/4-5.6 IS USM

Instruction

ENG

COPY

ENG-1

Thank you for purchasing a Canon product.

Dedicated to EOS cameras, the Canon EF70-

300mm f/4-5.6 IS USM lens is a high-

performance telephoto zoom lens equipped

with an Image Stabilizer.

¡“IS” stands for Image Stabilizer.

¡“USM” stands for Ultrasonic Motor.

Features

1. The Image Stabilizer gives the equivalent

effect of a shutter speed three stops faster*.

The lens also has a second image stabilizer

mode that is optimized for following shots of

moving subjects.

2. UD lens elements for excellent imaging

performance.

3. The zoom ring can be fixed to keep the lens

at the shortest point.

4. Ultrasonic motor (USM) for quick and quiet

autofocusing.

5. A truly round aperture hole results in a nicer

background blur.

*Based on [1/focal length] second. Generally, it requires

a shutter speed [1/focal length] second or faster to

prevent camera shake.

Conventions used in this instruction

Warning to prevent lens or camera

malfunction or damage.

Supplementary notes on using the lens

and taking pictures.

COPY

ENG-2

aSafety Precautions

•Do not look at the sun or a bright light source

through the lens or camera. Doing so could result

in loss of vision. Looking at the sun directly through

the lens is especially hazardous.

•Whether it is attached to the camera or not, do

not leave the lens under the sun without the

lens cap attached. This is to prevent the lens from

concentrating the sun’s rays, which could cause a

fire.

Handling Cautions

•If the lens is taken from a cold environment into

a warm one, condensation may develop on the

lens surface and internal parts. To prevent

condensation in this case, first put the lens into an

airtight plastic bag before taking it from a cold to

warm environment. Then take out the lens after it

has warmed gradually. Do the same when taking

the lens from a warm environment into a cold one.

•Do not leave the lens in excessive heat such as in

a car in direct sunlight. High temperatures can

cause the lens to malfunction.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such changes or

modifications should be made, you could be required to stop

operation of the equipment.

This equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Consult the dealer or an experienced radio/TV technician for

help.

This Class B digital apparatus complies with Canadian ICES-003.

COPY

ENG-3

Image stabilizer mode selector switch (→7)

Zoom ring

lock lever (→6)

Contacts

(→4)

Focus mode switch (→4)

Image stabilizer switch (→7)

Hood mount (→5)

Lens mount index (→4)

Filter mounting

thread (→10)

Zoom ring (→5)

Focusing ring (→4)

Zoom position index (→5)

Nomenclature

For detailed information, reference page numbers are provided in parentheses (→ **).

COPY

ENG-4

Setting the Focus Mode

¡Do not touch the rotating parts of the lens while

autofocus is active.

¡Do not adjust focus manually when the focus

mode switch is set to AF.

To shoot in autofocus (AF) mode, set the focus

mode switch to AF.

To use only manual focusing (MF), set the focus

mode switch to MF, and focus by turning the

focusing ring.

See your camera’s instructions for details on

mounting and detaching the lens.

¡After detaching the lens, place the lens with the

rear end up to prevent the lens surface and

electrical contacts from getting scratched.

¡If the contacts get soiled, scratched, or have

fingerprints on them, corrosion or faulty

connections can result. The camera and lens

may not operate properly.

¡If the contacts get soiled or have fingerprints on

them, clean them with a soft cloth.

¡If you remove the lens, cover it with the dust

cap. To attach it properly, align the lens mount

index and the

index of the dust cap as shown

in the diagram, and turn clockwise. To remove it,

reverse the order.

Mounting and Detaching the Lens

COPY

ENG-5

4. Zooming

To zoom, turn the lens’ zoom ring.

Be sure to finish zooming before focusing.

Changing the zoom ring after focusing can affect

the focus.

3. Hood (Sold separately)

¡The front end of the lens rotates, so hold it when

attaching the hood.

¡Part of the picture may be blocked if the hood is

not attached properly.

¡When attaching or detaching the hood, grasp

the base of the hood to turn it. To prevent

deformation, do not grasp the rim of the hood to

turn it.

The ET-65B hood can keep unwanted light out of

the lens, and also protects the front of the lens

from rain, snow, and dust.

Attach and align the hood to the hood mount on

the front of the lens, and turn the hood as shown

by the arrow to secure it.

The hood can be reverse-mounted on the lens

for storage.

COPY

ENG-6

5. Fixing the Zoom Ring

The zoom ring can be fixed to keep the lens at the shortest point. This function is convenient for

carrying a camera on a strap because it prevents the lens from extending.

1Turn the zoom ring to

the widest position

(70mm).

2Slide the zoom ring

lock lever in the

direction indicated by

the arrow.

¡To release the zoom ring,

slide the zoom ring lock

lever in the direction

opposite to the arrow.

The zoom ring can only be locked at maximum wide angle.

COPY

ENG-7

6. Image Stabilizer

You can use the image stabilizer in AF or MF mode.

1Set the STABILIZER

switch to .

¡If you are not going to

use the image stabilizer

function, set the switch to

2Select the stabilizer

mode.

¡MODE 1: Corrects

vibrations in all

directions. It is mainly

effective for shooting still

subjects.

¡MODE 2: It compensates

for vertical camera shake

during following shots in

a horizontal direction,

and compensates for

horizontal camera shake

during following shots in

a vertical direction.

3When you press the

shutter button halfway,

the Image Stabilizer

will start operating.

¡Make sure the image in

the viewfinder is stable,

then press the shutter

button the rest of the way

down to take the picture.

COPY

ENG-8

7. Tips on Using the Image Stabilizer

The image stabilizer in this lens is effective for hand-held shots under the following conditions.

¡In semi-darkened areas such as indoors or

outdoors at night.

¡In locations where flash photography is

prohibited, such as art museums and theater

stages.

¡In situations where your footing is uncertain.

¡In situations where fast shutter settings cannot

be used.

¡When panning subjects in motion.

●MODE 1 ●MODE 2

COPY

ENG-9

Tips on Using the Image Stabilizer

¡When you use a tripod, the Image

Stabilizer should be turned off to save

battery power.

¡The stabilizer is equally effective for hand-

held photography and photography with a

monopod.

¡The image stabilizer function also

operates when the lens is used with an

Extension Tube EF12 ll or EF25 ll.

¡Pictures may look distorted after being

taken depending on the camera, but this

doesn't affect shooting.

¡If you set the camera’s Custom Function

to change the assigned button to operate

the AF, the Image Stabilizer will operate

when you press the newly assigned AF

button.

¡The Image Stabilizer cannot compensate

for a blurred shot caused by a subject that

moved.

¡Set the STABILIZER switch to when

you are taking pictures using the Bulb

setting (long exposures). If the

STABILIZER switch is set to , the

image stabilizer function may introduce

errors.

¡The Image Stabilizer might not be fully

effective in the following cases:

•You shoot while riding on a bumpy road.

•You move the camera dramatically for a

panning shot in Mode 1.

•You shoot using techniques other than

following shots in Mode 2.

¡The Image Stabilizer consumes more

power than normal shooting, so fewer

shots can be taken if you use the

function.

¡The image stabilizer operates for about

two seconds even when your finger is off

the shutter button. Do not remove the lens

while the stabilizer is in operation. This

will cause a malfunction.

¡With the EOS-1V/HS, 3, 30/33/Elan7/7E,

30V/33V/Elan7N/7NE, Elan ll/Elan ll

E/50/50 E, 300/Rebel2000, IX, and D30,

the Image Stabilizer will not work during

self-timer operation.

COPY

Andere Handbücher für EF 70-300mm f/4.5-5.6 IS USM

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon FK14.5-60 Bedienungsanleitung

Canon

Canon EF LENS TS-E24MM F/3.5L Bedienungsanleitung

Canon

Canon EF-S17-85mm f/4-5.6 IS USM Bedienungsanleitung

Canon

Canon EF 20-35mm 1:2.8L Bedienungsanleitung

Canon

Canon Digisuper 86 TELE Bedienungsanleitung

Canon

Canon Tele Super 55 Bedienungsanleitung

Canon

Canon EF 100-400mm f/4.5-5.6L IS USM Bedienungsanleitung

Canon

Canon EF17-40LU Bedienungsanleitung

Canon

Canon RF15-30mm F4.5-6.3 IS STM Bedienungsanleitung

Canon

Canon RF 24mm F1.8 MACRO IS STM Bedienungsanleitung

Canon

Canon EF55-200mm f/4.5-5.6 II USM Bedienungsanleitung

Canon

Canon EF 70-300mm f/4.5-5.6 IS USM Bedienungsanleitung

Canon

Canon KJ10EX4.5B IRSE Bedienungsanleitung

Canon

Canon EF-M 18-55mm f3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF35mm f/1.4L II USM Bedienungsanleitung

Canon

Canon EF24-105MM Bedienungsanleitung

Canon

Canon IMAGE STABILIZER ULTRASONIC EF300MM f/4L IS... Bedienungsanleitung

Canon

Canon EF 50mm 1:2.5 MACRO(COMPACT Bedienungsanleitung

Canon

Canon CN7x17 KAS S/E1 Bedienungsanleitung

Canon

Canon TL-30.5 Bedienungsanleitung

Canon

Canon EF 24mm f/1.4L II USM Bedienungsanleitung

Canon

Canon EF-M 22mm f/2 STM Bedienungsanleitung

Canon

Canon EF 50mm 1:1.8 II Bedienungsanleitung

Canon

Canon EF 20-35mm 1:3.5-4.5 USM Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung