Canon IMAGE STABILIZER ULTRASONIC EF300MM f/4L IS... Bedienungsanleitung

EF300mm f/4L IS USM

Instruction

ENG

COPY

ENG-1

The Canon EF300mm f/4L IS USM lens is a

high-performance telephoto zoom lens for EOS

cameras, and it is equipped with an Image

Stabilizer.

• "IS" stands for Image Stabilizer.

• "USM" stands for Ultrasonic Motor.

Features

1. The Image Stabilizer gives the equivalent

effect of a shutter speed two stops faster*.

The lens also has a second image stabilizer

mode that is optimized for following shots of

moving subjects.

2. UD lens elements for excellent imaging

performance.

3. Ultrasonic motor (USM) for quick and quiet

autofocusing.

4. Manual focusing is available after the subject

comes into focus in autofocus mode (ONE

SHOT AF).

5. The lens is compatible with Extender EF1.4X ll

and EF2X ll.

*Based on [1/focal length] second. Generally, it requires

a shutter speed [1/focal length] second or faster to

prevent camera shake.

Thank you for purchasing a Canon product.

Conventions used in this instruction

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

COPY

ENG-2

aSafety Precautions

•Do not look at the sun or a bright light source

through the lens or camera. Doing so could result

in loss of vision. Looking at the sun directly through

the lens is especially hazardous.

•Whether it is attached to the camera or not, do

not leave the lens under the sun without the

lens cap attached. This is to prevent the lens from

concentrating the sun’s rays, which could cause a

fire.

Handling Cautions

•If the lens is taken from a cold environment into

a warm one, condensation may develop on the

lens surface and internal parts. To prevent

condensation in this case, first put the lens into an

airtight plastic bag before taking it from a cold to

warm environment. Then take out the lens after it

has warmed gradually. Do the same when taking

the lens from a warm environment into a cold one.

•Do not leave the lens in excessive heat such as in

a car in direct sunlight. High temperatures can

cause the lens to malfunction.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such changes or

modifications should be made, you could be required to stop

operation of the equipment.

This equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Consult the dealer or an experienced radio/TV technician for

help.

This Class B digital apparatus complies with Canadian ICES-003.

COPY

ENG-3

Nomenclature

Built-in lens hood (→10)

Filter mounting

thread (→10)

Focusing ring (→4)

Focusing distance range selection

switch (→5)

Image stabilizer switch (→6)

Image stabilizer mode selector switch

(→6)

Focus mode switch (→4)

Distance scale (→5)

Contacts (→4)

Tripod mount (→9)

Lens mount index (→4)

Orientation locking knob (→9)

Distance index (→5)

For detailed information, reference page numbers are provided in parentheses (→**).

COPY

ENG-4

See your camera’s instructions for details on

mounting and detaching the lens.

•After detaching the lens, place the lens with the

rear end up to prevent the lens surface and

electrical contacts from getting scratched.

•If the contacts get soiled, scratched, or have

fingerprints on them, corrosion or faulty

connections can result. The camera and lens

may not operate properly.

•If the contacts get soiled or have fingerprints on

them, clean them with a soft cloth.

•If you remove the lens, cover it with the dust

cap. To attach it properly, align the lens mount

index and the

index of the dust cap as shown

in the diagram, and turn clockwise. To remove it,

reverse the order.

Mounting and Detaching the Lens

2. Setting the Focus

Mode

After autofocusing in ONE SHOT AF mode, focus

manually by pressing the shutter button halfway

and turning the focusing ring. (Full-time manual

focus)

To shoot in autofocus (AF) mode, set the focus

mode switch to AF.

To use only manual focusing (MF), set the focus

mode switch to MF, and focus by turning the

focusing ring. The focusing ring always works,

regardless of the focus mode.

COPY

ENG-5

Infinity Compensation Mark

To compensate for shifting of the infinity focus

point that results from changes in temperature.

The infinity position at normal temperature is the

point at which the vertical line of the L mark is

aligned with the distance indicator on the

distance scale.

For accurate manual focusing on subjects at

infinity distance, look through the viewfinder while

rotating the focusing ring.

Infinity compensation mark

Distance index

You can set the focusing distance range to

1.5 m/4.9 ft. to infinity or 3 m/9.8 ft. to infinity. By

setting the suitable focusing distance range, the

actual autofocusing time can be shorter.

Switching the Focusing

Distance Range

If you autofocus outside the set focusing distance

range, the lens may stop focusing at the start of

the focusing range; however, this is not a

malfunction. Press the shutter release button

halfway again.

COPY

ENG-6

You can use the image stabilizer in AF or MF mode.

5. Image Stabilizer Settings

Select the stabilizer mode.

•MODE 1: Corrects vibrations

in all directions. It is mainly

effective for shooting still

subjects.

•MODE 2: It compensates for

vertical camera shake during

following shots in a horizontal

direction, and compensates for

horizontal camera shake

during following shots in a

vertical direction.

When you press the shutter

button halfway, the Image

Stabilizer will start

operating.

•Make sure the image in the

viewfinder is stable, then press

the shutter button the rest of

the way down to take the

picture.

Set the STABILIZER switch

to .

•If you are not going to use the

image stabilizer function, set

the switch to .

COPY

ENG-7

6. Tips on Using the Image Stabilizer

•In semi-darkened areas such as indoors or

outdoors at night.

•In locations where flash photography is

prohibited, such as art museums and theater

stages.

•In situations where your footing is uncertain.

•In situations where fast shutter settings cannot

be used.

•When panning subjects in motion.

●MODE 1 ●MODE 2

The image stabilizer in this lens is effective for hand-held shots under the following conditions.

COPY

ENG-8

Tips on Using the Image Stabilizer

•The Image Stabilizer cannot compensate for a

blurred shot caused by a subject that moved.

•

Set the STABILIZER switch when you are

using a tripod. If the Stabilizer switch is set to ,

the image stabilizer function may introduce errors.

•

Set the STABILIZER switch to when you are

taking pictures using the Bulb setting (long

exposures). If the STABILIZER switch is set to ,

the image stabilizer function may introduce errors.

•The Image Stabilizer might not be fully effective

in the following cases:

•You shoot while riding on a bumpy road.

•You move the camera dramatically for a

panning shot in Mode 1.

•You shoot using techniques other than

following shots in Mode 2.

•The Image Stabilizer consumes more power

than normal shooting, so fewer shots can be

taken if you use the function.

•

The image stabilizer operates for about two

seconds even when your finger is off the shutter

button. Do not remove the lens while the stabilizer

is in operation. This will cause a malfunction

•

With the EOS-1V/HS, 3, ELAN 7E/ELAN 7/30/33,

ELAN 7NE/ELAN 7N/30V/33V, ELAN II/ELAN

IIE/50/50E, REBEL 2000/300, IX, and D30, the Image

Stabilizer will not work during self-timer operation.

•When using a tripod, set the STABILIZER switch

to prevent errors.

•The stabilizer is equally effective for hand-held

photography and photography with a monopod.

•The Image Stabilizer function also operates

when the lens is used with the EF12 II or EF25

II Extension Tube, and the EF1.4X II Extender.

•

With Extender EF2X II attached to the lens, the

Image Stabilizer will work with the following cameras:

EOS-1Ds Mark III, EOS-1Ds Mark II, EOS-1Ds,

EOS-1D Mark lll, EOS-1D Mark II N, EOS-1D

Mark II, EOS-1D, EOS 40D, 30D, 20D, 20Da, 10D,

5D, DIGITAL REBEL XSi/450D, DIGITAL REBEL

XTi/400D DIGITAL, DIGITAL REBEL XT/350D

DIGITAL, DIGITAL REBEL/300D DIGITAL, D60,

D30, EOS DCS1, DCS3, D2000, D6000, EOS-

1V/HS, EOS-1N/DP/HS/RS, 3, ELAN 7E/ELAN

7/30/33, ELAN 7NE/ELAN 7N/30V/33V, ELAN

II/ELAN IIE/50/50E, REBEL X/REBEL XS/500,

REBEL G/500N, REBEL 2000/300, REBEL

Ti/300V, REBEL T2/300X, REBEL K2/3000V, IX,

IX Lite/IX7, 3000/88, 5000/888

•Pictures may look distorted after being taken

depending on the camera, but this doesn't affect

shooting.

•If you set the camera’s Custom Function to

change the assigned button to operate the AF,

the Image Stabilizer will operate when you press

the newly assigned AF button.

COPY

ENG-9

7. Using the Tripod Mount

Adjusting the Revolving Mount

You can loosen the orientation lock-knob on the tripod mount to allow it to rotate as needed to fit a

particular camera model for switching between vertical and horizontal positions.

Detaching

Use the following procedures to remove and attach the tripod mount.

Loosen the orientation

locking knob.

Rotate the tripod mount and

align the mounting indicator

on the tripod mount with the

one on the lens.

Slide off the tripod collar

away from the rear of the

lens.

If the foot of the tripod mount overlaps the switch, loosen the orientation locking knob on the tripod mount to

move the foot.

COPY

Andere Handbücher für IMAGE STABILIZER ULTRASONIC EF300MM f/4L IS...

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon EF-M 22mm f/2 STM Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF 400mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF-S10-18mm f/4.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF 50mm f/1.8 STM Bedienungsanleitung

Canon

Canon EF-S60mm f/2.8 MACRO USM Bedienungsanleitung

Canon

Canon EF 100mm 1:2.0 MACRO Bedienungsanleitung

Canon

Canon EF-S18-55mm f/3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon RF 35mm F1.8 MACRO IS STM Bedienungsanleitung

Canon

Canon EF 28-70mm 1:2.8 L USM Bedienungsanleitung

Canon

Canon EF35mm f/1.4L II USM Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon CN8x15 Bedienungsanleitung

Canon

Canon C-8 Bedienungsanleitung

Canon

Canon CN-E14mm T3.1 L F Bedienungsanleitung

Canon

Canon EF 8-15mm f/4L Fisheye USM Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF 17-40mm f/4L USM Bedienungsanleitung

Canon

Canon EF-16 Bedienungsanleitung

Canon

Canon EF 200mm f/2L IS USM Bedienungsanleitung

Canon

Canon MP-E 65 mm 1:2.8 1-5x Bedienungsanleitung

Canon

Canon EF24-105MM F/4L IS USM Bedienungsanleitung

Canon

Canon EF-S10-18mm f/4.5-5.6 IS STM Bedienungsanleitung

Canon

Canon KH21ex5.7 IRSE Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung