Canon RF 24-50mm F4.5-6.3 IS STM Bedienungsanleitung

ENG

Instructions

ENG-1

Thank you for purchasing a Canon product.

Canon RF24-50mm F4.5-6.3 IS STM is a

standard zoom lens for use with EOS R series

cameras.

z“IS” stands for Image Stabilizer.

z“STM” stands for Stepping Motor.

Conventions used in these instructions

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

Camera Firmware and Camera

Applications

Please use the latest versions of firmware and

applications with the camera in use. For details on

whether the firmware and applications in use are the

latest version or not, and for details on updating them,

please check the Canon website.

If the camera’s* firmware is not a compatible

version, the following limitations will apply.

zMagnified view functionality is not available.

zIn some cases, the camera malfunction may

occur.

* Applies to the following camera models:

EOS R and EOS RP

ENG-2

Precautions to ensure that the camera is used

safely. Read these precautions thoroughly. Make

sure all details are observed in order to prevent

risks and injury to the user and other people.

Warning

Details pertaining to risks that may

result in death or serious injury.

zDo not look directly at the sun or other strong

light sources through a lens. This may result in

loss of sight.

zDo not leave a lens in the sun without the lens

cap attached. The lens may concentrate entering

sunlight and cause a malfunction or fire.

Caution

Details pertaining to risks that may

result in injury or damage to other

objects.

zDo not leave the product in places exposed to

extremely high or low temperatures. The product

may cause burns or injury when touched.

Do not insert your hand or fingers into the

product. This may result in injury.

Safety Precautions

ENG-3

Handling Precautions

zDo not leave the product in excessive heat such as

in a car in direct sunlight. High temperatures can

cause the product to malfunction.

zIf the lens is taken from a cold environment into a

warm one, condensation may develop on the lens

surface and internal parts. To prevent condensation

in this case, first put the lens into an airtight

plastic bag before taking it from a cold to warm

environment. Then take out the lens after it has

warmed gradually. Do the same when taking the

lens from a warm environment into a cold one.

zThe lens interior may appear to waver, but this

does not indicate a defect or failure, and will not

cause any problems in use.

zIn order to optimize aperture control, there are

occasions in which the aperture blades will move

during zooming and focusing, even when the

aperture value is set for aperture-priority AE or

manual exposure, etc.

zPlease also read any lens related handling

precautions listed in your camera’s instruction

manual.

General Precautions

Shooting Precautions

zFocus again after recovering from the auto power

off status.

zTo maintain the focus position in the shooting-ready

status, set [Auto power off] to [Disable] on the

camera.

ENG-4

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such

changes or modifications should be made, you could be

required to stop operation of the equipment.

This equipment has been tested and found to comply with

the limits for a class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

CAN ICES-3 (B) / NMB-3 (B)

ENG-5

Focusing/Control ring (→ 8)

Hood mount (→ 13)

Filter mounting

thread (→ 14)

Zoom ring (→ 7, 10)

Image stabilizer switch (→ 11)

Lens mount index (→ 6)

Focus mode/control selector switch (→ 8)

Zoom position index (→ 7, 10)

Contacts (→ 6)

Lens mount (→ 6)

Lens retracted position index(→ 7)

z For detailed information, reference page numbers are provided in parentheses (→ **).

Nomenclature

ENG-6

Lens mount index

Lens release button Dust cap

Attaching the Lens

Align the lens mount indexes of the lens and

camera, and turn the lens clockwise until you

hear a click.

Detaching the Lens

Turn the lens counterclockwise while pressing

the camera’s lens release button. Detach the

lens once it has stopped turning.

Please refer to the camera’s instructions for

details.

zSet the camera’s power switch to OFF when

attaching or detaching the lens.

zAttach the lens cap before detaching the lens

from the camera.

zAfter detaching the lens, place the lens with the

rear end up and attach the dust cap to prevent

the lens surface and contacts from getting

scratched. Make sure the lens and dust cap

mount indexes are aligned when attaching the

dust cap.

zContacts that are scratched, soiled, or have

fingerprints on them may result in faulty

connections or corrosion, which may lead to

malfunctions. If the contacts get soiled, clean

them with a soft cloth.

1. Attaching and Detaching the Lens

ENG-7

The lens is fitted with a retraction mechanism.

This enables the length of the lens to be shortened in comparison to when shooting.

Shooting is not possible when the lens is stored.

Observe the following procedure to set the lens in the position for shooting.

Retracting Lens

1Rotate the zoom ring from the shooting

position in the opposite direction to the

white arrow.

2Continue rotating after it exceeds the

wide-angle position (24 mm).

3Rotate it to the end to align the lens

retraction position indicator with the

zoom indicator and store it.

zTake care to avoid catching your fingers, etc.,

between the lens extender and Focusing/Control

ring.

2. Shooting Preparations and Retracting Lens

Preparations from Retraction to Shooting

Rotate the zoom ring in the direction of the white

arrow until you hear a click to set the lens in the

preparatory shooting position.

zIf the lens retraction position indicator is aligned

with the zoom indicator, add slight pressure to

rotate the zoom ring in the direction of the arrow.

ENG-8

3. Focusing/Control ring

The focusing/control ring can be used as either a

focusing ring or a control ring.

Focusing/Control ring

Focus mode/control selector switch

Use as a Focusing Ring

Set the focus mode/control selector switch to AF

or MF.

To shoot in autofocus (AF) mode, set the focus

mode/control selector switch to AF. Table*1

To use only manual focusing (MF), set the focus

mode/control selector switch to MF, and focus by

turning the focusing ring (focusing/control ring).

Table*2

Table: List of Focus Mode and Focusing/Control

Ring Functions Using the Focus Mode/

Control Selector Switch

Focus mode/

Control selector switch

*1 AF *3 CONTROL *2 MF

Focus mode AF *4 AF/ *5 MF MF

Focusing/

control ring

functions

Focusing ring

Control ring

Focusing ring

Use as a Control Ring

Set the focus mode/control selector switch to

CONTROL. Table*3

Set the control ring function using the camera’s

menu. The control ring can be assigned the

functions that are commonly used with cameras,

such as shutter speed and aperture settings.

Please refer to the camera’s instructions for

details on how to use the control ring.

ENG-9

zDelayed focus may occur if the focusing ring

(focusing/control ring) is quickly turned.

zSetting the focus mode/control selector switch to

CONTROL will fix the focus mode as AF. Table*4

However, depending on the camera used, it is

possible to switch the focus mode to MF on the

camera. Table*5

Please refer to the camera’s instructions for

details.

Focusing/Control ring

zThe lens’ focusing ring (focusing/control ring) is

electronic.

zWith a camera capable of electronic full-time

manual focus, manual focusing is possible

in both One-Shot AF and Servo AF modes.

However, the camera settings need to be

changed.

zWhen AF operation is set to One-Shot AF,

manual focus is possible after autofocusing

has been completed by continuing to press the

shutter button halfway (electronic manual focus

function). However, the camera settings need to

be changed.

zWhen movie recording, the AF speed will be

slower than the still photo shooting mode. It is

possible to adjust the AF speed on the camera

by setting Movie Servo AF to [Enable].

Please refer to the camera’s instructions for

details.

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon EF 100mm f/2.8L MARCO IS USM Bedienungsanleitung

Canon

Canon CN8x15 Bedienungsanleitung

Canon

Canon EF300mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF500mm f/4L IS II USM Bedienungsanleitung

Canon

Canon EF500mm f/4L IS II USM Bedienungsanleitung

Canon

Canon RF 35mm F1.8 MACRO IS STM Bedienungsanleitung

Canon

Canon EF-M 55-200mm f/4.5-6.3 IS STM Bedienungsanleitung

Canon

Canon EF35mm f/2 IS USM Bedienungsanleitung

Canon

Canon 4318C002 Bedienungsanleitung

Canon

Canon CN-E30-300mm T2.95-3.7 LS Bedienungsanleitung

Canon

Canon RF 24-105mm F4-7.1 IS STM Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF-S17-55MM F/2.8 IS USM Bedienungsanleitung

Canon

Canon EF 50mm 1:1.8 II Bedienungsanleitung

Canon

Canon EF 135mm f/2.8 Bedienungsanleitung

Canon

Canon EF 50mm f/1.8 STM Bedienungsanleitung

Canon

Canon EF100mm 1:2.0 Bedienungsanleitung

Canon

Canon EF-S10-18mm f/4.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF35mm f/1.4L USM Bedienungsanleitung

Canon

Canon EF 28-80mm 1:2.8-4.0L USM Bedienungsanleitung

Canon

Canon KH16ex5.7 IRSE Bedienungsanleitung

Canon

Canon EF-S24mm f/2.8 STM Bedienungsanleitung

Canon

Canon CN20x50 Series Bedienungsanleitung

Canon

Canon EF 50mm 1:1.0L Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung