Canon EF500mm f/4L IS II USM Bedienungsanleitung

EF500mm f/4L IS II USM

EF600mm f/4L IS II USM

Instructions

ENG

COPY

ENG-1

Thank you for purchasing a Canon product.

Canon’s EF500mm f/4L IS II USM and EF600mm

f/4L IS II USM are high-performance super-

telephoto lenses, for use with EOS cameras.

“IS” stands for Image Stabilizer.

“USM” stands for Ultrasonic Motor.

Features

1. The Image Stabilizer gives the equivalent effect

of a shutter speed four stops* faster.

Also, a third Image Stabilizer mode effective for

shooting irregularly moving subjects.

2. Use of ﬂuorite lens elements giving superior

deﬁnition.

3. SWC (Subwavelength Structure Coating)

reduces ﬂare and ghosting.

4. Using a ﬂuorine coating on the foremost and

rearmost lens surfaces allows adhered dirt to be

removed more easily than before.

5. Ultrasonic motor (USM) for fast, quiet autofocus.

6. Manual focusing is available after the subject

comes into focus in autofocus mode (ONE

SHOT AF).

7. An AF stop button to pause autofocus whenever

desired.

8. A power focus mode enables smooth focus

change.

9. A focus preset function for advance storage

of focusing positions in memory to allow

instantaneous focusing.

10. Circular aperture for producing beautiful

softfocus images.

11. Can be used with EF1.4× III/EF2× III extenders.

12. Attachment slot provided for wire-type security

lock, located under the cover for the orientation

locking knob.

13. Tight seal structure ensures excellent dustproof

and drip-proof performance.

14. Designed for lighter weight with parts made of

magnesium alloy.

* Based on [1/focal length] second.

Generally, it requires a shutter speed [1/focal length]

second or faster to prevent camera shake.

COPY

ENG-2

Safety Precautions

Do not look at the sun or a bright light source

through the lens or camera. Doing so could result in

loss of vision. Looking at the sun directly through the

lens is especially hazardous.

Whether it is attached to the camera or not, do not

leave the lens under the sun without the lens cap

attached. This is to prevent the lens from concentrating

the sun’s rays, which could cause a ﬁre.

When the lens is mounted on a camera, be sure to also

hold the camera by the lens, including when mounting

on a tripod. Only holding by the camera could result in

scratches on the camera body or the lens itself. The lens

may also detach from its mount and fall, causing injury.

Do not use a strap attached to the camera. The mount

may break, resulting in the lens falling off and causing

injury or in scratches on the camera. Be sure to use the

camera with a dedicated strap attached correctly to the

strap mount on the lens.

Do not stand on top of the lens case. You may fall and

injure yourself.

Do not pile lens cases on top of one another as they

may fall and cause injury.

Conventions used in this instruction

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

Handling Cautions

If the lens is taken from a cold environment into a

warm one, condensation may develop on the lens

surface and internal parts. To prevent condensation

in this case, ﬁrst put the lens into an airtight plastic bag

before taking it from a cold to warm environment. Then

take out the lens after it has warmed gradually. Do the

same when taking the lens from a warm environment

into a cold one.

Do not leave the lens in excessive heat such as in a car

in direct sunlight. High temperatures can cause the

lens to malfunction.

COPY

ENG-3

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Do not make any changes or modiﬁcations to the equipment

unless otherwise speciﬁed in the instructions. If such changes

or modiﬁcations should be made, you could be required to

stop operation of the equipment.

This equipment has been tested and found to comply with

the limits for a class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Consult the dealer or an experienced radio/TV technician

for help.

Safety Precautions

This Class B digital apparatus complies with Canadian ICES-

003.

COPY

ENG-4

Nomenclature

The illustrations used in the explanations in this manual show the EF500mm f/4L IS II USM, but the

EF600mm f/4L IS II USM is used in the same way.

For detailed information, reference page numbers are provided in parentheses ( →**).

Distance scale (→ 14)

Orientation locking knob (→17)

Security slot (covered) (→17)

Strap mount (→5)

Focus mode switch (→6)

Contacts (→5)

Lens mount index (→5)

Drop-in ﬁlter (→18)

Image stabilizer mode selector switch (→11)

Focus preset switch (→8)

Focusing distance range

selector switch (→6)

Tripod mount (→17)

Focus preset button (→8)

Image stabilizer switch (→ 11)

Rubber ring (→5)

AF stop button

(→7)

Hood mount (→14)

Playback ring

(→9)

Focusing ring (→6)

COPY

ENG-5

1. Mounting and Detaching the Lens

See your camera’s instructions for details on

mounting and detaching the lens. The lens mount has a rubber ring for enhanced

dust- and water-resistance. The rubber ring may

cause slight abrasions around the camera’s lens

mount, but this will not cause any problems. If the

rubber ring becomes worn, it is replaceable by a

Canon Service Center at cost.

Attaching the strap

Thread the end of the strap through the strap

mount on the lens and then back through the

clasp on the strap. Pull the strap tight and check

that there is no slack in the clasp.

After detaching the lens, place the lens with

the rear end up to prevent the lens surface and

contacts from getting scratched.

If the contacts get soiled, scratched, or have

ﬁngerprints on them, corrosion or faulty

connections can result. The camera and lens

may not operate properly.

If the contacts get soiled or have ﬁngerprints on

them, clean them with a soft cloth.

If you remove the lens, cover it with the dust cap.

To attach it properly, align the lens mount index

and the index of the dust cap as shown in

the diagram, and turn clockwise. To remove it,

reverse the order.

COPY

ENG-6

Setting the Focus Mode

Switching the Focusing

Distance Range

After autofocusing in ONE SHOT AF mode, focus

manually by pressing the shutter button halfway

and turning the focusing ring. (Full-time manual

focus)

Lens Ranges

EF500mm f/4L IS II USM

FULL

3.7 m/12.14 ft. – 10 m/32.81 ft.

10 m/32.81 ft. – ∞

EF600mm f/4L IS II USM

FULL

4.5 m/14.76 ft. – 16 m/52.49 ft.

16 m/52.49 ft. – ∞

To shoot in autofocus (AF) mode, set the focus

mode switch to AF.

To shoot in manual focus (MF) mode, set the

focus mode switch to MF, and focus by turning

the focusing ring. The focusing ring always

works, regardless of the focus mode.

To shoot in power focus (PF) mode, set the

focus mode switch to PF when the focus preset

switch (p. 8) is at OFF.

Operating the playback ring enables focus

change at a set speed. This is a useful feature

for changing focus when shooting movies.

You can set the focusing distance range with a

switch. By setting a suitable focusing distance

range, the actual autofocusing time will be

shorter.

COPY

ENG-7

4. AF Stop Button

The AF stop function also works in AI Servo AF

mode.

Angle positioning of the AF stop button is

adjustable by a Canon Service Center at cost.

With the EOS 630/600, RT, A2/A2E/5, or 10S/10

set to the AI Servo AF mode and continuous

shooting, AF will not resume even after you

let go of the AF stop button. Press the shutter

release button halfway to resume AF.

With the EOS A2/A2E/5 and 10S/10 set to the

Sports mode, AF will not resume even after you

let go of the AF stop button. Press the shutter

release button halfway to resume AF.

You can change the functions of the AF stop

button using the camera’s Custom Function. For

details, please refer to the camera’s instructions.

During autofocus operation, you can press the

AF stop button to temporarily pause autofocus.

If the shutter button is still pressed halfway when

the AF stop button is released, autofocusing will

continue as before.

COPY

ENG-8

5. Focus Preset

By presetting any focusing distance, you can instantly focus at that point even while you are

shooting a different subject. This function operates in any of the AF, PF, and MF modes.

< How to Set >

Press the focus preset

button.

The focused distance will be

preset.

If the focus preset switch was

set to , the beeper will

sound once.

Press the shutter button

halfway to focus the

distance you want to preset.

Set the focus preset switch

to ON or .

COPY

ENG-9

Focus Preset

When turning the playback ring, keep your ﬁnger

away from the shutter button. In One-Shot AF

mode, the exposure will be locked when you

press the shutter button halfway and focus is

achieved. So if you press the shutter button

halfway while turning the playback ring, the

exposure may not be correct.

When not using the focus preset, set the switch

to OFF.

The focus preset function will not work while a

Live View image is displayed on the camera.

By turning the playback ring to the left or right,

the focus shifts as far as the preset distance.

Focus will shift freely released of AF focusing

while the playback ring is still turned.

If the focus preset switch was set to , the beeper

will sound twice.

In the following cases, the focusing distance scale

(p. 14) will move slightly. It will not affect the image.

• When you press the focus preset button.

• When you turn the playback ring.

< How to Focus at the Preset Distance >

COPY

Andere Handbücher für EF500mm f/4L IS II USM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon RF-S 18-150mm F3.5-6.3 IS STM Bedienungsanleitung

Canon

Canon EF-S18-135mm f/3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF 40mm f/2.8 STM Bedienungsanleitung

Canon

Canon CN-E30-105mm T2.8 L S Bedienungsanleitung

Canon

Canon 9808B002 Bedienungsanleitung

Canon

Canon 2746B002 Bedienungsanleitung

Canon

Canon RF 200-800mm F6.3-9 IS USM Bedienungsanleitung

Canon

Canon EF40mm f/2.8 STM Bedienungsanleitung

Canon

Canon High Resolution Lenses Bedienungsanleitung

Canon

Canon MP-E 65mm f/2.8 1-5x Macro Photo Bedienungsanleitung

Canon

Canon CN8x15 Bedienungsanleitung

Canon

Canon EF35mm f/1.4L II USM Bedienungsanleitung

Canon

Canon RF 400mm f/2.8 L IS USM Bedienungsanleitung

Canon

Canon EF135MM F/2L USM Bedienungsanleitung

Canon

Canon EF-S 18-13Smm f Bedienungsanleitung

Canon

Canon CN20x50 Series Bedienungsanleitung

Canon

Canon EF35mm f/1.4L II USM Bedienungsanleitung

Canon

Canon HJ40x10B IASD-V Bedienungsanleitung

Canon

Canon EF24-105MM F/4L IS USM Bedienungsanleitung

Canon

Canon TS E Bedienungsanleitung

Canon

Canon EF 200mm 1:2.8 L Bedienungsanleitung

Canon

Canon 3447C002 Bedienungsanleitung

Canon

Canon RF 35mm F1.8 MACRO IS STM Bedienungsanleitung

Canon

Canon KT17ex4.3B IRSE Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung