Canon RF 400mm f/2.8 L IS USM Bedienungsanleitung

ENG

Instructions

ENG-1

Thank you for purchasing a Canon product.

Canon RF400mm F2.8 L IS USM and

RF600mm F4 L IS USM are super-telephoto

lenses for use with EOS R series cameras.

 “IS” stands for Image Stabilizer.

 “USM” stands for Ultrasonic Motor.

Camera Firmware

Please use the latest version of firmware with the

camera in use. For details on whether the firmware is

the latest version or not, and for details on updating

the firmware, please check the Canon website.

Conventions used in these instructions

Warning to prevent lens or camera malfunction

or damage.

Supplementary notes on using the lens and

taking pictures.

ENG-2

Safety Precautions

Precautions to ensure that the camera is used

safely. Read these precautions thoroughly. Make

sure all details are observed in order to prevent

risks and injury to the user and other people.

Warning Details pertaining to risks that may

result in death or serious injury.

 Do not look directly at the sun or other strong

light sources through a lens. This may result in

loss of sight.

 Do not point the lens or camera at the sun

or photograph it. This is because the lens

concentrates the sun’s rays even when the sun

is outside the image area or when shooting with

backlight, which could cause malfunction or fire.

 Do not leave a lens in the sun without the lens

cap attached. The lens may concentrate entering

sunlight and cause a malfunction or fire.

 Where the lens is mounted on a camera, make

sure to properly support the lens. If you hold only

the camera, the lens may fall off the camera and

cause a malfunction or injury.

 Be sure to attach the included strap to the lens

when carrying a camera around with the lens

mounted on it. Using the strap for the camera may

allow the lens to fall off the camera and cause a

malfunction or injury.

Caution Details pertaining to risks that may

result in injury or damage to other

objects.

 Do not leave the product in places exposed to

extremely high or low temperatures. The product

may cause burns or injury when touched.

 Attach a tripod or monopod that is sufficiently

sturdy to the tripod mount on the lens.

ENG-3

General Precautions

Handling Precautions

 Do not leave the product in excessive heat such as

in a car in direct sunlight. High temperatures can

cause the product to malfunction.

 If the lens is taken from a cold environment into a

warm one, condensation may develop on the lens

surface and internal parts. To prevent condensation

in this case, first put the lens into an airtight

plastic bag before taking it from a cold to warm

environment. Then take out the lens after it has

warmed gradually. Do the same when taking the

lens from a warm environment into a cold one.

 Please also read any lens related handling

precautions listed in your camera’s instruction

manual.

ENG-4

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such changes

or modifications should be made, you could be required to

stop operation of the equipment.

This equipment has been tested and found to comply with

the limits for a class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

CAN ICES-3(B)/NMB-3(B)

ENG-5

Nomenclature

 The illustrations used in the explanations in this manual show the RF400mm F2.8 L IS USM, but

the RF600mm F4 L IS USM is used in the same way.

 For detailed information, reference page numbers are provided in parentheses (→**).

Orientation locking knob

Security slot (covered) (→23)

Strap mount (→7)

Manual focus speed switch

(→15)

Rubber ring (→6)

Focus mode switch (→8, 14)

Drop-in filter (→24)

Focusing distance range

selector switch (→9)

Tripod mount (→23)

Focus preset button (→11)

AF stop button (→10)

Lens mount index (→6)

Lens mount (→6)

Contacts (→6)

Hood mount (→19)

Playback ring (→11, 14)

Focusing ring (→8)

Image stabilizer switch (→16)

Image stabilizer mode selector switch (→16)

Focus preset switch (→11, 14)

ENG-6

Lens mount index

Lens release button Dust cap

1. Attaching and Detaching the Lens

Attaching the Lens

Align the lens mount indexes of the lens and

camera, and turn the lens clockwise until you

hear a click.

Detaching the Lens

Turn the lens counterclockwise while pressing

the camera’s lens release button. Detach the

lens once it has stopped turning.

Please refer to the camera's instructions for

details.

 Set the camera’s power switch to OFF when

attaching or detaching the lens.

 After detaching the lens, place the lens with the

rear end up and attach the dust cap to prevent

the lens surface and contacts from getting

scratched. Make sure the lens and dust cap

mount indexes are aligned when attaching the

dust cap.

 Contacts that are scratched, soiled, or have

fingerprints on them may result in faulty

connections or corrosion, which may lead to

malfunctions. If the contacts get soiled, clean

them with a soft cloth.

 The lens mount has a rubber ring to improve

dust-resistance and water-resistance

performance. This rubber ring may cause

friction marks to appear around the camera’s

lens mount, although this will have no effect on

usage.

 Since the lens is heavier than the camera, turn

the camera when attaching or detaching the

lens. Ensuring that the lens can rest safely on its

own is recommended, such as first mounting it

on a tripod.

 Rubber rings can be replaced at a Canon

Service Center at cost.

ENG-7

2. Attaching the Strap

Thread the end of the strap through the strap

mount on the lens and then back through the

clasp on the strap. Pull the strap tight and check

that there is no slack in the clasp.

Strap mount

Included strap

 Before using the lens, check that the strap is

attached securely, that it is not worn (damaged),

etc.

ENG-8

 Quickly turning the focusing ring may result in

delayed focus.

3. Setting the Focus Mode

To shoot in autofocus (AF) mode, set the focus

mode switch to AF.

To use only manual focusing (MF), set the focus

mode switch to MF, and focus by turning the

focusing ring.

See p. 14 for information on power focus (PF).

 The lens’ focusing ring is electronic.

 With a camera capable of electronic full-time

manual focus, manual focusing is always

possible whenever camera operations are

possible. However, this requires a change in

camera settings.

 When AF operation is set to [ONE SHOT],

manual focus is possible after autofocusing

has been completed by continuing to press the

shutter button halfway. However, this requires a

change in camera settings.

 When the AF button assignment is changed from

the “shutter button” (using the camera’s Custom

Function), manual focus is always possible

regardless if the shutter button is pressed

halfway any time the lens is not autofocusing.

Please refer to the camera’s instructions for details.

Focusing ring

Focus mode switch

ENG-9

4. Setting the Focusing Distance Range

You can set the focusing distance range with a

switch. By setting a suitable focusing distance

range, the lens is prevented from focusing on a

subject at an unintended distance.

Focusing distance range

Lens Ranges

RF400mm F2.8 L IS USM

FULL (2.5m-∞)

2.5m-7m

7m-∞

RF600mm F4 L IS USM

FULL (4.2m-∞)

4.2m-16m

16m-∞

Focusing distance range selector switch

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Kameraobjektiv Handbücher

Canon

Canon IMAGE STABILIZER ULTRASONIC EF300MM f/4L IS... Bedienungsanleitung

Canon

Canon EF-S18 Bedienungsanleitung

Canon

Canon EF 70-200mm f/2.8L IS II USM Bedienungsanleitung

Canon

Canon EF-S55-250mm f/4-5.6 IS II Bedienungsanleitung

Canon

Canon CN-E14mm T3.1 L F Bedienungsanleitung

Canon

Canon CN-E30-105mm Bedienungsanleitung

Canon

Canon EF14mm f/2.8L II USM Bedienungsanleitung

Canon

Canon EF 35mm 1:2.0 Bedienungsanleitung

Canon

Canon EF 200mm 1:1.8 L USM Bedienungsanleitung

Canon

Canon EF-S 10-22mm f/3.5-4.5 USM Bedienungsanleitung

Canon

Canon IMAGE STABILIZER EF70-200MM F/4L IS USM Bedienungsanleitung

Canon

Canon EF 40mm f/2.8 STM Bedienungsanleitung

Canon

Canon EF35mm f/1.4L II USM Bedienungsanleitung

Canon

Canon EF-S18-135mm f/3.5-5.6 IS STM Bedienungsanleitung

Canon

Canon EF 50mm1:1.8 Bedienungsanleitung

Canon

Canon EF50mm f/1.0L USM Bedienungsanleitung

Canon

Canon KJ22ex7.6B IRSE Betriebsanleitung

Canon

Canon EF 8-15mm f/4L Fisheye USM Bedienungsanleitung

Canon

Canon KT20x5B KRSD Bedienungsanleitung

Canon

Canon CN-E15.5-47mm T2.8 L S Bedienungsanleitung

Canon

Canon KH20x6.4 KRS Bedienungsanleitung

Canon

Canon SUPER E20 Bedienungsanleitung

Canon

Canon EF 28mm 1:2.8 Bedienungsanleitung

Canon

Canon EF-S18-200mm f/3.5-5.6 IS Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung