Canon PowerShot N2 Bedienungsanleitung

Andere Handbücher für PowerShot N2

2

Inhaltsverzeichnis

Andere Canon Digitalkamera Handbücher

Canon

Canon EOS-1D Mark IV Bedienungsanleitung

Canon

Canon EOS 20D Digital Bedienungsanleitung

Canon

Canon EOS 1500D Rebel T7 Bedienungsanleitung

Canon

Canon PowerShot A10 Bedienungsanleitung

Canon

Canon DIGITAL IXUS 430 Bedienungsanleitung

Canon

Canon PowerShot N Bedienungsanleitung

Canon

Canon EOS 60D Bedienungsanleitung

Canon

Canon SD400 - PowerShot Digital ELPH Camera Bedienungsanleitung

Canon

Canon PowerShot S5 IS Bedienungsanleitung

Canon

Canon WP-DC45 Bedienungsanleitung

Canon

Canon PowerShot G16 Bedienungsanleitung

Canon

Canon Digital IXUS 900 TI Benutzerhandbuch

Canon

Canon PowerShot SX500 IS Bedienungsanleitung

Canon

Canon PowerShot SD 700 IS Digital Elph Bedienungsanleitung

Canon

Canon PowerShot ELPH 120 IS Bedienungsanleitung

Canon

Canon POWERSHOT G9X MARK II Bedienungsanleitung

Canon

Canon PowerShot SX110 IS Bedienungsanleitung

Canon

Canon PowerShot SX740 HS Bedienungsanleitung

Canon

Canon DIGITAL IXUS vEOS D30 Bedienungsanleitung

Canon

Canon EOS M EF-M 22mm STM Kit Bedienungsanleitung

Canon

Canon POWERSHOT 220 HS Bedienungsanleitung

Canon

Canon PowerShot G3 Bedienungsanleitung

Canon

Canon Powershot SD3500 IS Bedienungsanleitung

Canon

Canon IXUS 145 Bedienungsanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Nikon

Nikon Coolpix 100 Bedienungsanleitung

Sending still images and movies between two Canon-brand

cameras (Wi-Fi function) (PowerShot N2)

You can connect two cameras via Wi-Fi and send images between.

NOTE

•Only Canon-brand cameras equipped with a Wi-Fi function can be connected to

wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be

connected to if they do not have a Wi-Fi function. You cannot connect to

PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS

cameras with this method.

•Connections require that a memory card be in the camera.

•Keep your fingers or other objects off the Wi-Fi antenna area. Covering this may

decrease the speed of your image transfers.

•Depending on the condition of the network you are using, it may take a long time

to send movies. Be sure to keep an eye on the camera battery level.

•Up to 50 images can be sent together at once. One movie up to five minutes (or

one digest movie up to 13 minutes) can be sent.

•On the screen, wireless signal strength is indicated by the following icons.

[ ] high, [ ] medium, [ ] low, [ ] weak

Connecting the cameras via Wi-Fi

Perform the following operations on both of the cameras to be connected.

1. Press the <Playback> ( ) button to turn the camera on.

2. Touch [Wi-Fi].

NOTE

When making Wi-Fi settings for the first time, a screen will appear for you to register a

nickname for the camera.

Touch inside the frame to access the keyboard, and then enter a nickname. This nickname will be

displayed on the screen of target devices when connecting to other devices via Wi-Fi.

3. Touch [ ].

4. Drag your finger up or down on the screen to choose [Add a Device].

NOTE

•Once a camera is added, the camera nickname will be displayed on the screen in step 4.

To connect to a camera again, simply choose the camera nickname from the list.

5. The following screen appears.

Perform steps 1 4 on the other camera as well.

Camera connection information will be added when [Start connection on target camera] is

displayed on both camera screens.

Once the other camera is registered, the screen for sending images will appear. Please see step 7

and later steps for instructions on how to send images.

6. Once both cameras are connected, a screen similar to the following one will be displayed.

NOTE

•Once you have connected to devices via the Wi-Fi menu, recent destinations will be

listed first when you access the Wi-Fi menu. You can easily connect again by choosing

the device. You can register new devices by dragging left or right to access the device

selection screen.

•If you prefer not to display recent target devices, touch [FUNC.], and then choose

[MENU] > [ ] tab > [Wi-Fi Settings] > [Target History] > [Off].

•To add multiple cameras, repeat the above procedures starting from step 2.

Sending Images to a Camera Individually

7. Touch [Send this image].

NOTE

•You can choose the resolution (size) of images to send by touching [ ] on the image

transmission screen.

•Movies cannot be resized.

8. The following screen appears.

After the image has been sent to the target camera and the [Transfer completed] message

appears, return to step 7.

Sending Multiple Images

9. Touch [Select and send].

10. The following screen appears.

•Touching an image to send will label it with a [ ] icon.

•To cancel selection, touch the image again. [ ] is no longer displayed.

•If you move the zoom ring toward [ ], the camera will switch to single-image display.

You can also drag left or right across the screen to choose images.

•After you finish choosing images, touch [OK].

11. The following screen appears.

NOTE

•You can choose the resolution (size) of images to send.

•Movies cannot be resized.

Touch [Send].

•[Transfer completed] is displayed after the image is sent, and the image transfer screen is

displayed again.

•To disconnect, touch [ ] in the upper right, and then touch [OK] on the confirmation

screen.