Canvas 088-1682-2 Bedienungsanleitung

ASSEMBLY INSTRUCTIONS

Toll-free: 1-888-670-6684

IMPORTANT: Please read this manual carefully before beginning assembly of this product.

Keep this manual for future reference.

Day Bed and Swing

MODEL NO. 088-1682-2

VALENCIA COLLECTION

TABLE OF CONTENTSIMPORTANT SAFETY INSTRUCTIONS

Important Safety Instructions

TABLE OF CONTENTS

Parts List 3

Assembly 5

Cleaning and Maintenance 14

Technical Specifications 14

Warranty 14

IMPORTANT:

Retain for future reference, and read carefully.

• SET UP YOUR FURNITURE PROPERLY

Ensure that all parts are assembled properly and fully tightened as per the instructions.

When placing in the desired location, ensure that all legs are resting on the same surface.

You may adjust the legs levellers as required to ensure that the item stands in a rigid position.

• EXAMINE YOUR FURNITURE

Examine occasionally to ensure that there are no loose parts. If loose parts are found,

they must be retightened fully before additional use.

• Do not completely tighten bolts and nuts until indicated in assembly step.

2MODEL NO. 088-1682-2

PARTS LIST

Leg post - 2

Side panel - 2

Long top crossbar - 2

Short top crossbar - 2

Rear leg crossbar - 1

Right arm - 1

Left arm - 1

Front seat support bar - 1

Rear seat support bar - 1

Seat and back - 1

Hanging bar - 4

Large canopy frame - 1

Canopy frame bar - 4

Net - 1

Throw pillow - 2

M6*25 bolt - 2

M6*30 bolt - 4

M6*36 bolt - 2

M8*15 bolt - 4

M8*35 bolt - 8 + 1 spare

Small canopy frame - 2

Small canopy frame bar - 1

Cushion - 1

Pillow - 2

Large canopy - 1

Small canopy - 1

M6*12 bolt - 4

PARTS LIST

Plastic washer - 2

S-hook - 2

U-bracket - 4

Open wrench - 1

Hex wrench - 1

M8 wrench - 1

M8*60 bolt - 4

M8*80 bolt - 2

M6 nut - 4

M8 nut - 6

M6 metal washer - 4

M8 metal washer - 22

4MODEL NO. 088-1682-2

Needed for assembly:

2 people

ASSEMBLY PREPARATION

Let us help you!

DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST!

1-888-670-6684

If you have questions regarding your product, require warranty

assistance, or have damaged or missing parts, please call our customer

service toll-free helpline. Contact us for assistance; we’re here to help.

IMPORTANT:Please read and understand this manual before any assembly. Before beginning

assembly of product, make sure all parts are present. Compare parts with packaging contents

list. If any part is missing, or if you have any questions, contact the service centre at

1-888-670-6684 (toll-free).

Place all parts from the box in a cleared area and position them on the ﬂoor in front of you.

Remove all packing materials and place them back into the box. Do not dispose of the packing

materials until assembly is complete. Read each step carefully before beginning any assembly

and make sure you understand each step. If you are missing a part, please call our toll-free

number for assistance: 1-888-670-6684 between 9:00 am to 5:00 pm Eastern standard time

Monday through Friday.

ASSEMBLY

Step 1

Requires 1, 2, A, O.

Insert a bolt Athrough the U-shaped bracket O, and secure into the leg top 1

or 2. Do not tighten. Repeat for the remaining 3legs.

Not actual size.

Step 2

Requires 1, 2, 3, F, L.

Attach the side panel 3 to 2 legs 1 and 2by inserting a bolt F through a metal

washer L, through the hole of the side panel 3, and secure into the leg 2.

Make sure the arrow “↑↑” is pointing up. Repeat procedure for the other

leg 1. Do not tighten completely. Repeat procedure for the other side panel.

6MODEL NO. 088-1682-2

Not actual size.

ASSEMBLY

Step 3

Requires 1, 2, 4, E, L.

Insert two long top crossbars 4into the holes at the top of each leg. Line up the

holes. For each hole insert a bolt Ethrough a metal washer L, through the leg,

and secure into the long top crossbar 4. Do not tighten completely. Repeat

procedure for the other long top crossbar.

Step 4

Requires 4, 5, G, J, L.

Attach a short top crossbar 5onto the long top crossbars 4. Make sure the U-shaped

brackets of the short top crossbar 5are facing down. Line up the holes. For each

hole, insert a bolt G through a metal washer L, then through the outer side of the

bracket on the short top crossbar 5, the long top crossbar 4, the inner side of the

bracket on the short top crossbar 5, another metal washer L, and secure with a

nut J. Do not tighten completely. Repeat procedure for the other side.

Not actual size.

ASSEMBLY

Step 5

Requires 3, 6, D, K, P, Q, R.

Place the rear leg crossbar 6between the side panels 3. Line up the holes.

Insert a bolt Dthrough a metal washer K, through the side panel 3, and secure

into the rear leg crossbar 6. Do not tighten completely. Repeat procedure for

the other side. Tighten all bolts and nuts from step 1 to step 5 by using the

wrenches provided (except bolt A).

Not actual size.

Step 6

Requires 7, 8, 9, 10.

Lay out the right arm 7, left arm 8, front seat support bar 9and rear seat

support bar 10. Make sure that the labels marked “FRONT’’ on the arms and

seat support bars are all facing the front edge of the seat. Attach the seat

support bars to the arms by pressing the tabs on the ends of the seat support

bars down into the brackets on the arms. Make sure they are securely seated.

8MODEL NO. 088-1682-2

FRONT

ASSEMBLY

Step 7

Requires 7, 8, 11, H, J, L, M, P, R.

Unfold the seat and back 11 and lay it on top of the frame. Line up the holes

in the arms 7 and 8 with the holes in the side tubes of the seat and back 11.

Insert a bolt H(from outside to inside) through the bracket of the arm, through

a plastic washer M, through the side bar on the seat and back, through a metal

washer Land secure with a nut J. Do not tighten completely. Repeat procedure

for the other side. Then securely tighten the bolts and nuts.

Step 8

Requires 10, 11.

Raise the back side of the seat and back 11 and fasten the U-shaped bracket of the

back support tube to the rear seat support bar 10 as per the drawing.

HJLM

JLM

Not actual size.

ASSEMBLY

Step 9

Requires 5, 7, 8, 12, N.

Attach the hanging bars 12 to the arms by sliding the bottom hole in the bars

over the pins on the outside of the arms 7 and 8. Position the bars so that the

end labelled “TOP” is up and facing toward the swing seat. At each end of the

seat assembly, bring together the holes in the top ends of the hanging bars and

thread them on to a “S” hook N. Hang the “S” hooks from the loops on the

short top crossbar 5.

Step 10

Requires 13, 14, 19.

Insert large canopy frame bars 14 into the large canopy frame 13 as per drawing.

Place the large canopy 19 over the assembled canopy frame 13 and 14 as shown.

10 MODEL NO. 088-1682-2

TOP

Inhaltsverzeichnis

Andere Canvas Inneneinrichtung Handbücher

Canvas

Canvas JAX ZD-2055-2PKR Bedienungsanleitung

Canvas

Canvas CV Camrose 088-2208-8 Bedienungsanleitung

Canvas

Canvas SULLIVAN FUTON 068-7839-4 Bedienungsanleitung

Canvas

Canvas INVERMERE 168-0076-2 Bedienungsanleitung

Canvas

Canvas BALA KVS948G Bedienungsanleitung

Canvas

Canvas CV Camrose 088-2208-8 Bedienungsanleitung

Canvas

Canvas SUMMERHILL TVS36LH Bedienungsanleitung

Canvas

Canvas BURNABY 168-0113-4 Bedienungsanleitung

Canvas

Canvas 068-7826-4 Bedienungsanleitung

Canvas

Canvas 088-2296-6 Bedienungsanleitung

Canvas

Canvas Office Landscape Private Office Hutch Montageanleitung

Canvas

Canvas 068-1530-2 Bedienungsanleitung

Canvas

Canvas MILLWOOD 168-0040-6 Bedienungsanleitung

Canvas

Canvas SUMMERHILL 088-2036-6 Bedienungsanleitung

Canvas

Canvas 088-1721-0 Bedienungsanleitung

Canvas

Canvas 088-17 17-2 Bedienungsanleitung

Canvas

Canvas THOMPSON 168-0109-6 Bedienungsanleitung

Canvas

Canvas YORKVILLE 088-2231-0 Bedienungsanleitung

Canvas

Canvas Concordia 168-0037-6 Bedienungsanleitung

Canvas

Canvas MINTO 168-0107-0 Bedienungsanleitung

Canvas

Canvas OLSEN 168-0072-0 Bedienungsanleitung

Canvas

Canvas CTCBF36V Bedienungsanleitung

Canvas

Canvas JENSEN 088-1928-0 Bedienungsanleitung

Canvas

Canvas CTI1513565 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung