Canvas MERCIER 399-4009-0 Bedienungsanleitung

MERCIER 5-PIECE

CONVERSATION SET -

CHAIR

IMPORTANT: Please read this manual carefully before beginning assembly of this product.

Keep this manual for future reference.

Made in China. Imported by Trileaf Distribution Trifeuil Toronto, Canada, M4S 2B8

Warning! To reduce the risk of serious injury, read the following safety

instructions before assembling and using the chair.

• This product is intended for domestic, outdoor use only.

• The product should be placed on ﬂat, horizontal ground.

• Any assembly or maintenance of the product must be carried out by adults only.

• Arrange necessary manpower when assembling or moving the product.

• Some parts may contain sharp edges. Wear protective gloves if necessary.

• Check all nuts and bolts periodically for tightness. When required, tighten them again.

•If the product will not be used for a long period of time (e.g., wintertime), it should be

stored in a clean, dry environment.

• Do not light any ﬁres inside or near the product!

• Do not hang any weights on the frame.

• Retain the original package to store the product.

RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.

2 people

• Do not place the product underneath electrical lines.

• Keep children away during assembly.

• This product contains small parts which can be swallowed by children.

• Keep ﬁngers away from places where they can be pinched or trapped.

1-888-670-6684

If you have questions regarding your product, require warranty assistance,

or have damaged or missing parts, please call our customer service toll-free

helpline. Contact us for assistance; we're here to help.

Please read and understand this manual before any assembly. Before beginning

assembly of product, make sure all parts are present. Compare parts with packaging contents list.

If any part is missing, or if you have any questions, contact the service centre at

1-888-670-6684 (toll free).

Place all parts from the box in a cleared area and position them on the ﬂoor in front of you. Remove

all packing materials and place them back into the box. Do not dispose of the packing materials until

assembly is complete. Read each step carefully before beginning any assembly and make sure you

understand each step.

Needed for assembly:

Right arm -

Left arm -

Seat frame -

Back frame -

Seat cushion -

M6x15 Combination bolt and washer -

Hex key -

Requires

Place the back frame (D) on a soft, ﬂat surface. Line up the bolt holes on the

back frame (D) with the corresponding bolt holes on the seat frame (C).

Insert M6x15 combination bolt and washer (AA) and lightly tighten the bolts

using the hex key (BB). Do not completely tighten until all assembly is

completed.

Requires

Attach the right arm (A) to the back frame (D). Line up the bolt holes on the right arm

(A) with the corresponding bolt holes on the back frame (D). Insert M6x15 combination

bolt and washer (AA) and lightly tighten the bolts using the hex key (BB). Do not

completely tighten until all assembly is completed. Repeat the same step for left arm (B).

Requires

Attach the right arm (A) to the seat frame (C). Line up the bolt holes on the

right arm (A) with the corresponding bolt holes on the seat frame (C). Insert

M6x15 combination bolt and washer (AA) and lightly tighten the bolts using

the hex key (BB). Do not completely tighten until all assembly is completed.

Repeat the same step for left arm (B).

Requires

Ensure all bolts are securely tightened using the hex key (BB). Turn the chair to the

upright position and place the seat cushion (E) on the chair.

Do not

completely tighten.

Do not

completely tighten.

Do not

completely tighten.

• Check all screws and nuts periodically for tightness, tightening them

again as required.

• Disassemble the chair in the reverse order of the assembly steps.

• Always disassemble the chair completely. A partially disassembled

chair is not stable enough to resist wind and bad weather, and

therefore can be damaged and/or cause damage.

• Clean the chair with mild soap and water. Rinse thoroughly, and wait

until the chair is completely dry before reassembling it.

• Always use a mildsoap—never detergent.

- Water should be cold to lukewarm—never more than 25°C (77°F).

• Steel components of garden accessories and furniture are treated with

rust-inhibiting paint. However, due to the nature of steel, surface oxidation (rusting)

will occur if this protective coating is scratched. This is a natural process. To minimize

this condition, it is recommended that care be taken when assembling and handling

the product in order to prevent the paint from being scratched. Surface rust can be

removed easily using a very light application of common cooking oil. If surface

oxidation (rusting) occurs and no measures are taken to correct it, the oxidation may

start dripping onto the assembly surface, which may cause damaging stains that may

be di cult to remove.

Dimensions (L x W x H)

Product weight

Weight capacity

This CANVAS product carries a one (1) year warranty against defects in

workmanship and materials.Trileaf Distributionagrees to replacea

defective product free of charge within the stated warranty period,when

returned by the original purchaserwithproof of purchase. This product is

not guaranteed against wear or breakage due to misuse and/or abuse.

27 3/4 x 23 1/4 x 31 7/8"

70.5 x 59 x 81 cm

14 lb

6.36 kg

220 lb

99.8 kg

CLEANING AND MAINTENANCE

SPECIFICATIONS

MERCIER 5-PIECE

CONVERSATION SET -

LOVESEAT

IMPORTANT: Please read this manual carefully before beginning assembly of this product.

Keep this manual for future reference.

MERCIER 5 PIECE

CONVERSATION SET -

LOVESEAT

Made in China. Imported by Trileaf Distribution Trifeuil Toronto, Canada, M4S 2B8

Warning! To reduce the risk of serious injury, read the following safety

instructions before assembling and using the loveseat.

• This product is intended for domestic, outdoor use only.

• The product should be placed on ﬂat, horizontal ground.

• Any assembly or maintenance of the product must be carried out by adults only.

• Arrange necessary manpower when assembling or moving the product.

• Some parts may contain sharp edges. Wear protective gloves if necessary.

• Check all nuts and bolts periodically for tightness. When required, tighten them again.

•If the product will not be used for a long period of time (e.g., wintertime), it should be

stored in a clean, dry environment.

• Do not light any ﬁres inside or near the product!

• Do not hang any weights on the frame.

• Retain the original package to store the product.

RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.

2 people

• Do not place the product underneath electrical lines.

• Keep children away during assembly.

• This product contains small parts which can be swallowed by children.

• Keep ﬁngers away from places where they can be pinched or trapped.

1-888-670-6684

If you have questions regarding your product, require warranty assistance,

or have damaged or missing parts, please call our customer service toll-free

helpline. Contact us for assistance; we're here to help.

Please read and understand this manual before any assembly. Before beginning

assembly of product, make sure all parts are present. Compare parts with packaging contents list.

If any part is missing, or if you have any questions, contact the service centre at

1-888-670-6684 (toll free).

Place all parts from the box in a cleared area and position them on the ﬂoor in front of you. Remove

all packing materials and place them back into the box. Do not dispose of the packing materials until

assembly is complete. Read each step carefully before beginning any assembly and make sure you

understand each step.

Needed for assembly:

Right arm -

Left arm -

Seat frame -

Back frame -

Seat cushion -

M6x15 Combination bolt and washer -

Hex key -

Requires

Place the back frame (D) on a soft, ﬂat surface. Line up the bolt holes on the

back frame (D) with the corresponding bolt holes on the seat frame (C).

Insert M6x15 combination bolt and washer (AA) and lightly tighten the bolts

using the hex key (BB). Do not completely tighten until all assembly is

completed.

Requires

Attach the right arm (A) to the back frame (D). Line up the bolt holes on the right arm

(A) with the corresponding bolt holes on the back frame (D). Insert M6x15 combination

bolt and washer (AA) and lightly tighten the bolts using the hex key (BB). Do not

completely tighten until all assembly is completed. Repeat the same step for left arm (B).

Requires

Attach the right arm (A) to the seat frame (C). Line up the bolt holes on the

right arm (A) with the corresponding bolt holes on the seat frame (C). Insert

M6x15 combination bolt and washer (AA) and lightly tighten the bolts using

the hex key (BB). Do not completely tighten until all assembly is completed.

Repeat the same step for left arm (B).

Requires

Ensure all bolts are securely tightened using the hex key (BB). Turn the loveseat to the

upright position and place the seat cushion (E) on the loveseat.

Do not

completely

tighten.

Do not

completely tighten.

Do not

completely

tighten.

• Check all screws and nuts periodically for tightness, tightening them

again as required.

• Disassemble the loveseat in the reverse order of the assembly steps.

• Always disassemble the loveseat completely. A partially disassembled

loveseat is not stable enough to resist wind and bad weather, and

therefore can be damaged and/or cause damage.

• Clean the loveseat with mild soap and water. Rinse thoroughly, and wait

until the loveseat is completely dry before reassembling it.