Carrier 40VM900003 Fehlerbehebungshandbuch

Carrier Enterprise

Technical Services

Basic Operation:

1. Turn ON the remote control by pressing the ON/OFF button.

2. Select the MODE be pressing the MODE button.

•AUTO, COOL, DRY, HEAT, FAN are selectable modes of operation.

•AUTO is not available on Heat Pump Systems.

•FAN speed cannot be adjusted in DRY mode.

3. Select FAN speed.

•AUTO, LOW, MED, HIGH are selectable fan speeds.

4. If AUTO, COOL, DRY, HEAT mode is selected, set desired temperature.

5. In AUTO mode, press LEFT or RIGHT buttons within 10 seconds to switch

between cooling & heating set points.

More detailed information on these items and more can be found in the Installation and

Operation Manual that came with the remote controller. If lost contact CE Tech Services

with model number for replacement.

Page 1 of 5Ver. 1.0

Carrier Bryant VRF Remote

Control Quick Startup Guide

1 –MODE Selects the running mode.

2 –TEMP UP Increases set temperature

3 –ON/OFF Button Powers the IDU on/off

4 –LED (green) Indicates when the IDU is

ON and blinks when there is a fault

5 –Left Selects options to the left

6 –MENU/OK Enters the menu/sub menu &

Confirms selection

7 –Right Selects options to the right

8 –Fan Selects fan running speed

9 –BACK Returns to the previous level

10 –TEMP DOWN Reduces the set

temperature

All display icons are explained

on page 4 of this document.

1 43

8 9

40VM900003 –Remote Controller

Carrier Enterprise

Technical Services

Page 2of 5

Menu Operations:

1. Press the MENU/OK button

to enter the menu.

2. Press TEMP UP and DOWN

to select desired menu item.

•If IDU does not have an integral louver, the louver function will not be

available.

3. Set DATE & TIME.

4. Set DAYLIGHT SAVINGS TIME.

5. Set DISPLAY CONFIGURATION. Select Standard or Simple.

•When the indoor temperature display is set, the current room temp

will be displayed below the set point temp(s) on the main display.

Service & Startup Settings:

1. Press and hold the BACK button and

the FAN button for 5 seconds at the

same time to enter SERVICE Settings.

2. From this menu many settings can be

preformed. Most commonly used are;

ROOM TEMPERATURE SENSOR LOCATION, SETPOINT LIMIT, DRY

CONTACT & IDU ADDRESSING

3. IDU Addressing –Press TEMP DOWN button until IDU Addressing is

highlighted and press MENU/OK button to enter.

4. Press TEMP UP or TEMP DOWN to select desired IDU address and press

MENU/OK button to lock in.

5. See last page of this document for all SERVICE items.

Carrier Bryant VRF Remote

Control Quick Startup Guide

Carrier Enterprise

Technical Services

Page 3of 5

Advanced Information:

1. On the second page of the MENU

options, selectADVANCED INFORMATION.

2. If OPERATIONAL DATA is selected, sensor

and other operational detail can been seen.

•IF more than one IDU is connected

to the same Remote Controller

Pressing TEMP UP or TEMP DOWN

will cycle through the other IDU’s.

3. If ERROR CODE is selected, the last 10

groups of fault codes will be displayed.

4. If DRY CONTACTS is selected, the status

of each can be seen.

Carrier Bryant VRF Remote

Control Quick Startup Guide

Carrier Enterprise

Technical Services

Page 4of 5

Display Items:

Carrier Bryant VRF Remote

Control Quick Startup Guide

Carrier Enterprise

Technical Services

Page 5of 5

Service Items:

Carrier Bryant VRF Remote

Control Quick Startup Guide

Inhaltsverzeichnis

Andere Carrier Fernbedienung Handbücher

Carrier

Carrier SYSTXCCITW01-A Infinity Bedienungsanleitung

Carrier

Carrier NTC Bedienungsanleitung

Carrier

Carrier RG56 Bedienungsanleitung

Carrier

Carrier Infinity Control SYSTXCCUID01 Anleitungen und Rezepte

Carrier

Carrier AQUASMART Bedienungsanleitung

Carrier

Carrier RG66B3/BGEF Bedienungsanleitung

Carrier

Carrier Cavius 9001 Bedienungsanleitung

Carrier

Carrier RG10B2/BGEF Bedienungsanleitung

Carrier

Carrier RG66B3/BGEF Bedienungsanleitung

Carrier

Carrier BMY33HH20WM Bedienungsanleitung

Carrier

Carrier rg05 Bedienungsanleitung

Carrier

Carrier TruVu UC683T Installationshandbuch

Carrier

Carrier RG56V Series Bedienungsanleitung

Carrier

Carrier 40RC003603 Bedienungsanleitung

Carrier

Carrier 40KMC Bedienungsanleitung

Carrier

Carrier RG10L/BGEFU1 Bedienungsanleitung

Carrier

Carrier RG56V Series Bedienungsanleitung

Carrier

Carrier split room air conditioner remote control Bedienungsanleitung

Carrier

Carrier Infrared Remote 2 Bedienungsanleitung

Carrier

Carrier KSACN0101AAA Bedienungsanleitung

Carrier

Carrier AQUASNAP PLUS Bedienungsanleitung

Carrier

Carrier Aquasnap Plus 33AW-RC1 Bedienungsanleitung

Carrier

Carrier EU-OSK105 Bedienungsanleitung

Carrier

Carrier BMS-CM1281TLUL Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung