Carrier RG67V/BGEF Bedienungsanleitung
REMOTE CONTROLLER
OWNER’S MANUAL
16117000001554
CA06R-RG67V(A)
2018.01.04
02
01
Correct Disposal of Battery
- This marking printed in the batteries attached to your Air Conditioning product is information for end-uses.
- Batteries, at their end-of-life, should be disposed of separately from general household waste. Please,
dispose of batteries correctly at your local community waste collection or the recycling center.
CAUTION
CONTENT
1. QUICK START
1. QUICK START
2. DISPLAY AND BUTTONS
2.1 Display
2.2 Buttons
3. HOW TO USE BASIC FUNCTIONS
3.1 Basic Operations
3.2 Timer Function
4. HOW TO USE ADVANCED FUNCTIONS
FIT BATTERIES
POINT REMOTE TOWARD UNIT
PRESS POWER BUTTON
SELECT MODE SELECT TEMPERATURE
SELECT FAN SPEED
1
6
2
5 4
My Mode Follow Me LED Turbo
Ioniser
Swing
Timer
SelfClean
Mode On/Off Fan
Sleep
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SETTEMPERATURE
Optional Functions:
The function may be not available on the
actual remote controller or not workable
for the air conditioner.
AUTO
LOW
MED
HIGH
Fan
RG67V/BGEF
2
3
3
4
5
5
6
7
*
The remote control uses two alkaline batteries (1.5 Volts).
Do not use old batteries or batteries of different types, as this may cause the controller malfunction.
The average battery life during normal use is approximately half a year.
Replace the batteries when there is no receiving beep coming from the indoor unit or transmission
indicator on the remote control fails to light.
If you do not use the remote control for more than two months, please remove the batteries.
Otherwise battery leakage may damage the remote control.
The maximum operating distance for the remote control is approximately 8 meters.
Avoid direct sunlight on the receiver of indoor unit, which may interfere with good signal reception
and the air conditioner may not work properly. Draw the curtains to avoid direct sunlight.
Keep the remote control away from water. Do not let the remote control fall down.
Never use objects with sharp point to press the button on the remote control.
Prevent any liquid from falling into the remote control.
If other electric applications react to the remote control, move these applications.
Do not dispose of batteries as unstored municipal waste. Refer to local laws for proper disposal of
batteries.
Avoid obstacles obstructions such as curtains, doors or other materials between the remote control
and the receiver of indoor unit to avoid blocking the signals from the remote control to the indoor unit.
The transmitter of remote control must be directed toward the receiver of indoor unit when pressing
the buttons of the desired functions. An acoustical acknowledgement sound (beep) will indicate that
signal has been received.
INSTRUCTIONS OF USING WIRELESS REMOTE CONTROL
Mode
3
LED
Mode Fan
Swing My
Mode
Fix
Follow
Me
High
Power
ECO
Sleep
Self Clean
Fresh
Smart Eye
***
*
X-ECO
Timer
[17°C ~ 30°C]
AUTO
COOL
DRY
HEAT
FAN
2. DISPLAY AND BUTTONS
04
03
2.1 DISPLAY 2.2 BUTTONS
On/Off
Press to start operation.
Press again to stop.
Mode
Press the mode button to
switch the mode in turn.
ECO Sleep
Press to enter Sleep Mode
Starts and stops horizontal
louver movement.
Fix
Swing
My Mode
Press to memorize or resume
your favorite pre-settings.
Follow Me
Press to activate or clear
the Follow me function.
Keep pressing 2 more
seconds to activate or
disable Smart eye function.
LED
Press to turn on/off the
LED display. Keep
pressing 2 more seconds
to activate or disable
Fresh function.
High Power(Turbo)
Press to activate/disable
the High power function.
Keep pressing 2 more
seconds to activate/disable
Self Clean function.
X-ECO
Press to enter the energy
efficient mode.
TIMER
Press to set the timer on
or off.
Fan Speed
Press to select the fan
speed.
Temperature Down
Decreases temperature in
1 C increments.
Min Temp. is 17 C
Temperature UP
Increases temperature in
1 C increments.
Max Temp. is 30 C .
Used to set the desired
up/down air flow direction.
The louver changes 6
degree in angle for each
press.
NOTE:
1. Above illustration shows all the features. For actual model, only the relevant parts are shown.
2. Buttons design might be slightly different from the actual one.
Information are displayed when the remote controller is powered up.
Transmission Indicator
Sleep mode display
Follow me feature
display
LOCK feature
display
Not available for
this unit
Not available for
this unit
Silence feature
display
Lights up when remote
sends signal to indoor
unit
ON/OFF display
Appears when the unit
is turned on, and disappears
when the it is turned off.
TIMER ON display
( )
Battery display
Fan speed display
Displays selected fan speed:
Temperature/Timer display
Displays the set temperature
by default, or timer setting
when using TIMER ON/OFF
functions
Temperature range:
17-30 C
o
Timer setting range:
0-24 hours
This display is blank when
operating in FAN mode.
Low battery detection
Displays when X-ECO feature
is activated.
MODE display
Displays the current
mode, including:
Displays when TIMER
ON is set
TIMER OFF display
( )
Displays when TIMER
OFF is set
This fan speed can not be
adjusted in AUTO or DRY
mode.
Note:
All indicators shown in the figure are for the purpose of clear presentation. But during the actual
operation only the relative functional signs are shown on the display window.
Low speed
Medium speed
High speed
Auto fan speed
(model dependent)
LED
Mode Fan
Swing My
Mode
Fix
Follow
Me
High
Power
ECO
Sleep
Self Clean
Fresh
Smart Eye
***
*
X-ECO
Timer
3. HOW TO USE BASIC FUNCTIONS
06
05
3.1 BASIC OPERATIONS
AUTO
Mode
Select AUTO mode Set your desired temperature
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
Turn on the air conditioner
COOL
or
HEAT
Mode
Select COOL/HEAT mode Set the temperature Turn on the air conditioner
Set the fan speed
DRY
Mode
Select DRY mode Set the temperature
NOTE:
In DRY mode, fan speed can not be set since it has already been automatically controlled.
Turn on the air conditioner
FAN
Mode
Select FAN mode Turn on the air conditioner
Set the fan speed
Before operation, please ensure the unit is plugged in and power is available.
ATTENTION
3.2 TIMER FUNCTION
TIMER ON/OFF - Set the amount of time after which the unit will automatically turn on/off.
TIMER
ON
Press to initiate
the ON time sequence.
Press Temp. up or down button for
for multiple times to set the desired
time to turn on the unit.
Press Temp. up or down button for
for multiple times to set the desired
time to turn off the unit.
NOTE:
1. When setting the TIMER ON or TIMER OFF, the time will increase by 30 minutes increments with each
press, up to 10 hours. After 10 hours and up to 24, it will increase in 1 hour increments. (For example,
press 5 times to get 2.5h, and press 21 times to get 11h,) The timer will revert to 0.0 after 24.
2. Cancel either function by setting its timer to 0.0h.
Point remote to unit and wait 2sec,
the TIMER ON will be activated.
n
My Mode Follow Me LED Turbo
Ioniser
Swing
Timer
SelfClean
Mode On/Off Fan
Sleep
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SETTEMPERATURE
TIMER
OFF
Press to initiate
the OFF time sequence.
Point remote to unit and wait 2sec,
the TIMER OFF will be activated.
n
My Mode Follow Me LED Turbo
Ioniser
Swing
Timer
SelfClean
Mode On/Off Fan
Sleep
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SETTEMPERATURE
Setting TIMER ON & OFF (example).
n
My Mode Follow Me LED Turbo
Ioniser
Swing
Timer
SelfClean
Mode On/Off Fan
Sleep
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SETTEMPERATURE
n
My Mode Follow Me LED Turbo
Ioniser
Swing
Timer
SelfClean
Mode On/Off Fan
Sleep
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SETTEMPERATURE
Current
time 1PM
2:00PM 3:00PM 4PM 5PM 6PM
Timer starts Unit turns
ON
Unit turns
OFF
2.5 hours later
5 hours later
3:30PM
Example: If current timer is 1:00PM,
to set the timer as above steps, the
unit will turn on 2.5h later (3:30PM)
and turn off at 6:00PM.
Mode
Fan
Mode
Mode
Mode
Fan
On/Off
Timer
Timer
Timer
Timer
Timer
Timer
4. HOW TO USE ADVANCED FUNCTIONS
08
07
Swing
Press Swing button
Fix
Press Fix button
ECO
Sleep
Press ECO Sleep button under Auto/Cool/Heat mode
This Sleep operation saves energy and improves night time comfort by synchronising with the
body’s metabolism. The sleep function is not available in Fan or Dry mode.
Follow
Me
or
Smart
eye
Press this button under COOL or HEAT operating Mode
Press this button to activate Follow me. This function
can adjust room temperature base on the controller’s
sensor and make you comfort.
Press this button more than 2 seconds
Keep pressing this button more than 2 seconds, the
smart eye function is activated and will detects the
people activities in the room. (Model dependent)
The controller will display
the actual temp. at its
location and send this
signal to indoor unit
every 3 minutes
The smart eye feature
is energized.
Keep pressing this button more than 2 seconds, the
fresh function is activated and will help to remove
pollen and impurities from the air. (Model dependent)
LED
or
Fresh
Press LED button
Press this button to turn on and turn off the display
on the indoor unit.
LED
Press this button more than 2 seconds
Press this button under COOL or DRY Mode more
than 2 seconds
Keep pressing this button more than 2 seconds, the
unit will clean itself to avoid bacteria grow around
heat exchanger.(Model dependent)
The unit will enter low
fan mode to dry up the
coil. The cleaning cycle
takes 15~30 mins, after
which the unit will turn
off automatically.
High Power
(Turbo)
or
Self Clean
Press this button
Press this button to activate High Power(Turbo)
feature. It enables the unit to reach the set
temperature in the shortest time. Press it
again to disable it.(Model dependent)
The unit will operate at
the biggest capacity
output to reach the
setting Temp. quickly.
My
Mode
Press this button
My Mode function enable you to memorize or restore your favorite settings (mode, temperature and fan
speed). The default memorized setting is AUTO mode, 26 C and AUTO fan.
Press this button more than 2 seconds
The unit will restore to
the setting you made
last time.
The unit will memorize
the current setting
mode, Temp., fan).
The set temp. will increase(cooling)
or decrease (heating) by 1 C per
hour for the first 2hs. Please refer
to the OWNER’S MANUAL for
more details.
Note:Please put the controller in the location where
can ensure the indoor unit can receive the signal.
The horizontal louver will swing up and down
automatically when pressing Swing button.
Press again to make it stop.
Keep pressing this button more than 2 seconds,
the vertical louver swing function is activated.
(Model dependent)
The horizontal louver will move an angle of 6 degree for each press.
Press the button until the louver reach your prefer location.
Follow
Me
2s
Follow
Me
LED
2s The ionizer or Plasma
dust collector (model
dependent) is energized.
Swing
2s
Swing
2s
My
Mode
My
Mode
Fix
High
Power
2s
High
Power
ECO
Sleep
4. HOW TO USE ADVANCED FUNCTIONS
10
09
F. P.
Press this button 2 times during one second under HEAT Mode and setting temperature of 17 C.
The unit will operate
at high fan speed (while
compressor on) with
temperature automatically
set to 8 C.
Press this button 2 times under HEAT Mode and setting temperature of 17 C to activate the freeze
protection function. It will help to keep the room above 0 C (freezing point) in severe cold winter.
Press On/Off, Sleep, Mode, Fan and Temp. button while operating will cancel this function.
Lock
Mode
1
Press together button and button at the same time more than 2 seconds to activate Lock Mode 1 function.
Enter lock mode 1 by pressing and button at the same time more than 2 seconds. At lock mode 1, all
buttons will not response except press these two buttons again to disable locking.
2s
Lock symbol displays
Lock
Mode
2
Press together TIMER button and X-ECO button at the same time more than 2 seconds to activate lock
mode 2 function.
Keep pressing Fan button for more than 2 seconds to activate/disable Silence function.
Enter lock mode 2 by pressing TIMER and X-ECO button at the same time more than 2 seconds. At lock
mode 2, all buttons will not response except press ON/OFF, TEMP UP and DOWN buttons or press these
two buttons again to disable locking.
Lock symbol displays
2s
Note:This function is for heat pump air conditioner only.
Silence
Due to low frequency operation of compressor, it may result in insufficient cooling and heating capacity.
Press ON/OFF, Mode, Sleep button, turn on F.P.or Self clean function while operating will cancel silence
function.(Model dependent)
2
X-ECO
Press this button under COOL Mode to enter the energy efficient mode.
Note:This function is only available under COOL mode.for heat pump air conditioner only.
Fan
2s
Under cooling mode, press this button, the remote controller will adjust the temperature
automatically to 24 C, fan speed of Auto to save energy (only when the set temperature is
less than 24 C). If the set temperature is above 24 C, press the X-ECO button, the fan speed
will change to Auto, the set temperature will remain unchanged.
Note:
Pressing the X-ECO button, or modifying the mode or adjusting the set temperature to less
than 24 C will stop ECO operation.
Under ECO operation, the set tmeperature should be 24 C or above, it may result in insufficient
cooling. If you feel uncomfortable, just press the X-ECO button again to stop it.
O
O
O
O
O
2s
Swing Fix
Swing Fix
Swing
Fix
2s
Timer
X-ECO
The unit will enter the
energy efficient mode.
X-ECO
图纸要求：
材质：双胶纸80g
尺寸：A3纸大度420*297对折为单页A4
封面封底双色套印，内页黑白。
封面套印开利蓝pantone 072 (C100, M85, Y0, K0)
商标叶子颜色pantone 376 (C50, M0, Y100, K0)
Andere Handbücher für RG67V/BGEF
2
Inhaltsverzeichnis
Andere Carrier Fernbedienung Handbücher
Carrier
Carrier RG10L/BGEF Bedienungsanleitung
Carrier
Carrier RG67N/BGEF Bedienungsanleitung
Carrier
Carrier BMS-CM1281TLUL Bedienungsanleitung
Carrier
Carrier RBC-AMS54E-UL Bedienungsanleitung
Carrier
Carrier AQUASNAP PLUS Bedienungsanleitung
Carrier
Carrier Aquasnap Plus 33AW-RC1 Bedienungsanleitung
Carrier
Carrier Infrared Remote 2 Bedienungsanleitung
Carrier
Carrier 40VM900003 Fehlerbehebungshandbuch
Carrier
Carrier RG56/BGEF-CA Bedienungsanleitung
Carrier
Carrier RG10B2/BGEF Bedienungsanleitung
Carrier
Carrier AQUASNAP Bedienungsanleitung
Carrier
Carrier SYSTXCCITW01-A Infinity Bedienungsanleitung
Carrier
Carrier 40 series Bedienungsanleitung
Carrier
Carrier rg05 Bedienungsanleitung
Carrier
Carrier BMY33HH20WM Bedienungsanleitung
Carrier
Carrier RG67V/BGEF Bedienungsanleitung
Carrier
Carrier Infinity Control SYSTXCCUID01 Anleitungen und Rezepte
Carrier
Carrier 40KMC Bedienungsanleitung
Carrier
Carrier NTC Bedienungsanleitung
Carrier
Carrier RG56V Series Bedienungsanleitung
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
