Carrier 33CSSP3-FC Bedienungsanleitung

Owner’s Manual

Downloaded from ManualsNet.com search engine

Table of Contents

Front Panel .......................................................................................2

Display..............................................................................................3

Quick Start Set the clock and go .............................................................6

Selecting the Heat or Cool Mode ........................................................7

Basic Operation...............................................................................11

Overriding the Daily Schedule..........................................................12

Programming Occupied / Unoccupied ....................................................13

Advanced Setup ..............................................................................18

About Advanced Features & Operation.............................................24

This equipment has been tested and found to comply

with the limits for a Class A digital device pursuant to

Part 15 of the FCC Rules.These limits are

designed to provide reasonable protection against

harmful interference when this equipment is

operated in a commercial environment.This

equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance

with the instruction manual, may cause harmful

interference to radio communications. Operation of

this equipment in a residential area is likely to cause

harmful interference, in which case the user

will be required to correct the interference at his/her

own expense.

This Class (A) digital apparatus meets

all the requirements of the Canadian

Interference-Causing Equipment

Regulations.

Cet appareil numérique de la Classe

(A) respecte toutes les exigences du

R`eglement sur le matériel brouilleur

du Canada.

Follow Installation Instructions carefully. Disconnect

Power to the Heater/Air Conditioner before removing

the old thermostat and installing the new thermostat.

CAUTION

IMPORTANT

North American Emissions Compliance

United States Canada

Downloaded from ManualsNet.com search engine

Front Panel

Mode Fan

AUTO

COOL

HEAT

1Liquid Crystal Display with Thermoglow

2Up/Down Buttons

3Mode Button

4Fan/Override Button

5Heat or Cool Indicator

Heat = Red, Cool = Green

4 5

Downloaded from ManualsNet.com search engine

Display

1Mode Indicators - Page 7-10

Selects the operational mode of the equipment.

HEAT - Indicates the heating mode.

COOL - Indicates the cooling mode.

AUTO - Indicates the system will automatically changeover between

heat and cool modes as the temperature varies.

PROGRAM ON - Indicates the time period program is enabled to run.

OFF - Indicates heating and cooling are turned o.

2 Clock with Day of theWeek - Page 6

Indicates the current time and day. This clock is also used to

program the time period schedules.

3Room Temperature Display

Indicates current room temperature.

4Desired Set Temperature - Page 11

Indicates desired room temperature(s).

OUTSIDE

Downloaded from ManualsNet.com search engine

Display

5Override icon - Page 12 & 21

Indicates the program is currently being overriden for up to six hours.

6Occupied & Unoccupied icons - Pages 13-16

Indicates the program number: Occupied 1, 2, 3, or Unoccupied.

7Setup icons - Pages 18-22

Indicates the thermostat is in the advanced setup mode.

8Fan icon - Page 11

Indicates fan operation.

Fan = low speed

Fan = medium speed

Fan = high speed

When only the Fan icon is displayed, the fan is in the Auto mode and

will run only when necessary to heat or cool.

OUTSIDE

Downloaded from ManualsNet.com search engine

Display

9Start & Stop icon - Page 14 & 16

Appear when programming occupied time periods.

10 Locked icons - Pages 30

Indicates keypad has been locked.

11 Outside icons - Pages 21-31

Indicates the temperature displayed is from the optional outside sensor.

OUTSIDE

910

Downloaded from ManualsNet.com search engine

Quick Start Set the Clock and Go

Press the MODE and FAN buttons at the same time

for two seconds to enter Setup screens.

During Setup and

Programming: Pressing

the UP or DOWN button

will modify the ashing

selection.

Tip: To change hours

quickly, press and hold

the FAN button and

press the UP or DOWN

button.

Press the MODE and FAN

buttons at the same

time to return to normal

operation.

The thermostat is preprogrammed from the factory to operate a 4 pipe system without

the need for further programming.To optimize the installation of this thermostat for a

2 pipe system, follow the instructions in the Advanced Setup section. Page 19

FAN

MODE

Setting the Clock

Setting the Day MODE

Press

To adjust the

Clock or Day,

Use

Downloaded from ManualsNet.com search engine

Selecting the Heat or Cool Mode 4-Pipe Operation

Heating Only

The HEAT setting indicates the temperature

that the room has to fall to before the heat-

ing source will turn on to heat the room.

Cooling Only

The COOL setting indicates the temperature

that the room has to rise to before the cool-

ing source will turn on to cool the room.

Heating or Cooling

AUTO will automatically select heat or cool

based on room temperature demand.

Time Schedule for Heating or Cooling

Program On will activate the stored timer

operation for the heating and cooling

setpoints (occupied or unoccupied periods).

O

OFF indicates both heating and cooling are

turned o.

Press

MODE

Press

MODE

Press

MODE

Fan

Select Mode by Pressing the MODE Button

Downloaded from ManualsNet.com search engine

Selecting the Heat or Cool Mode 2-Pipe Operation

Heat Only

Step #6 = 1 in the Advanced Setup section, page 19.

Heating Only

The HEAT setting indicates the temperature

that the room has to fall to before the heating

source will turn on to heat the room.

Time Schedule for Heating or Cooling

Program On will activate the stored timer

operation for the heating and cooling

setpoints (occupied or unoccupied periods).

OFF

OFF indicates both heating and cooling

are turned o.

Press

MODE

Press

MODE

Fan

Downloaded from ManualsNet.com search engine

Selecting the Heat or Cool Mode 2-Pipe Operation

Cool Only

Step #6 = 2 in the Advanced Setup section, page 19.

Cooling Only

The COOL setting indicates the temperature

that the room has to rise to before the cooling

source will turn on to cool the room.

Time Schedule for Heating or Cooling

Program On will activate the stored timer

operation for the heating and cooling

setpoints (occupied or unoccupied periods).

OFF

OFF indicates both heating and cooling

are turned o.

Press

MODE

Press

MODE

Fan

Downloaded from ManualsNet.com search engine

Andere Handbücher für 33CSSP3-FC

Inhaltsverzeichnis

Andere Carrier Thermostat Handbücher

Carrier

Carrier User interface Comfort Module Series Betriebsanleitung

Carrier

Carrier TB-PAC Bedienungsanleitung

Carrier

Carrier Performance Non-Programmable ADGE Bedienungsanleitung

Carrier

Carrier Cor Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Carrier

Carrier Thermostat Montageanleitung

Carrier

Carrier 33CS450-01 Bedienungsanleitung

Carrier

Carrier TSTAT Bedienungsanleitung

Carrier

Carrier Performance EDGE Bedienungsanleitung

Carrier

Carrier Programmable Dual Fuel Thermostats Anleitungen und Rezepte

Carrier

Carrier Aquazone 50QE900-NPWS Bedienungsanleitung

Carrier

Carrier 33CS Anleitungen und Rezepte

Carrier

Carrier TOTALINE GOLD P274-0150 Bedienungsanleitung

Carrier

Carrier TP -PRH Bedienungsanleitung

Carrier

Carrier Performance TP-PRH-A Bedienungsanleitung

Carrier

Carrier A07049 Bedienungsanleitung

Carrier

Carrier Comfort TC-WHS01-BLK Bedienungsanleitung

Carrier

Carrier 53DFST2-NP Bedienungsanleitung

Carrier

Carrier Edge TP-PRH Bedienungsanleitung

Carrier

Carrier 33CS Bedienungsanleitung

Carrier

Carrier AQUAZONE 50QE900 Bedienungsanleitung

Carrier

Carrier Comfort series Bedienungsanleitung

Carrier

Carrier Infinity Control Home Bedienungsanleitung

Carrier

Carrier 50QE900-511WS Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung