Carrier AQUAZONE 50QE900-250FS Bedienungsanleitung

OWNER'S MANUAL

P/N 50QE900-250FS

Programmable

Digital Thermostat

Mounts Flush to the Wall

7 Day Programmable

3 Occupied, 1 Unoccupied

Auto Changeover

Large, Easy To Read Display

Thermoglow Backlight

Remote Sensor Ready

Dry Contact Equipped

Energy Saving Smart Fan

Fan Purge, IAQ Feature

Includes Locking Cover

Commercial Systems & Services Carrier Corporation 3/00

Meets California Title 24

Designed for Commercial Water Source Heat Pumps

COOL

HEAT

AUTO

I2:00

AQUAZONE

Table Of Contents

FRONT PANEL

DISPLAY

QUICK START Set the clock and go

BASIC OPERATION

PROGRAMMING Occupied / Unoccupied

ADVANCED SETUP

ABOUT ADVANCED OPERATION

WARRANTY

Page 1

CAUTION

Follow Installation Instructions before proceeding.

SET THERMOSTAT TO MODE “OFF” PRIOR TO

CHANGING SETTINGS IN SETUP OR RESTORING

FACTORY DEFAULTS.

P/N 50QE900-250FS

Commercial Systems & Services Carrier Corporation 3/00

Front Panel

Page 2

Liquid Crystal Display

with Thermoglow

Up/Down Buttons

Mode Button

Override Button

Heat or Cool Indicator

Heat = Red, Cool = Green

Temperature Sensor Bubble

Mode Indicators

Selects the operation mode of the equipment.

HEAT - indicates the heat mode.

COOL - indicates the air conditioning mode.

AUTO - indicates the system will automatically

changeover between heat and cool modes

as the temperature varies.

OFF - indicates the entire system is turned off.

PROGRAM ON - indicates the stored program

is enabled to run. Page 6.

Clock with Day of the Week

Indicates the current time and day. This clock is

also used to program the timer periods. Page 5.

Room Temperature Display

Indicates the current room temperature.

Desired Set Temperature

Indicates desired room temperature(s). Page 7.

Display

Page 3

unoccupied

Program

Fan On Service Filter

COOL

HEAT

Override

Locked

ONOFF

AUTO

Stop

Start

SetupSuMoTuWeThFrSa

123

I2:00

Override Indication

Indicates the current program is currently being

overridden for up to 4 hours. Page 7,17.

Occupied or Unoccupied Indication

Indicates the program number: Occupied 1,2,3,

or Unoccupied. Page 8-11.

Setup Indication

Indicates the thermostat is in the programming

mode. Page 12.

Fan Operation Indication

Fan On - indicates constant, continuous fan

operation.

When Fan On is not lit - indicates the fan will

only operate when necessary to heat or

to cool. Page 12.

Service Filter Indication

Service Filter indicates when the filter should

be serviced under normal conditions.

Appears after 0 - 1950 hours of blower

operation (adjustable). Page 14.

Locked Indication

Locked appears after the right combination of

buttons are pressed, rendering the buttons

inoperative. Page 19.

Start / Stop Indication

Start or Stop appears when programming

timer functions. Page 9.

Display

Page 4

During Setup & Programming:

Pressing the Mode button

selects different flashing items.

(Represented in dark black)

Pressing the Up and Down

buttons will modify the flashing

selection.

Press the Mode button.

While holding the Mode,

press the Override button

for 2 seconds to enter Setup

screens.

Press both Mode and

Override buttons as

above to return to

normal operation.

Quick Start Set the Clock and Go

Page 5

The thermostat is preprogrammed from the

factory to operate 1 or 2 Stage equipment* without

the need for further programming. To optimize the

installation of this thermostat follow the instructions

in the Advanced Setup section.

buttons.

To adjust the

clock or Day use

Press

I2:00

OVERRIDE

MODE

The HEAT setting indicates the

temperature the room has to

reach before the furnace will

turn on to heat the room.

The COOL setting indicates the

temperature the room has to

reach before the air conditioner

will turn on to cool the room.

OFF indicates both heating

and air conditioning

systems are turned off.

AUTO will automatically select

heat or cool based on room

temperature demand.

Program On will activate the

stored timer operation.

(occupied &

unoccupied periods.)

Select Mode

Basic Operation

Page 6

Press

70 69

HEAT

I2:00

COOL

I2:00

COOL

HEAT

AUTO

I2:00

unoccupied

ProgramOn

COOL

HEAT

I2:00

OFF

I2:00

MODE

buttons.

In any mode, adjust the

desired Set Temperature

with

Pressing the up/down buttons in Auto mode will adjust both the heat and cool

set temperatures simultaneously.

Pressing the up/down buttons in Heat or Cool modes will adjust only the

heat or cool set temperature.

Select Desired Temperature

Override

Page 7

Basic Operation

During programmed, unoccupied periods

a press of the Override button will force

the thermostat into Occupied 1 comfort

settings, temporarily.

With each successive push of the Override

button, the override timer will add 30

minutes, until the maximum of 4 hours is

reached. Then the next press will zero out

the override timer, returning to unoccupied

if there are no further button presses.

When in Override, the Override icon and

the Occupied 1 icon appear on the display.

The time of day clock alternates with the

time remaining in override.

During Override, the setpoints are

adjustable, provided the keypad is not

locked.

Press

OVERRIDE

COOL

HEAT

AUTO

I2:00

unoccupied

ProgramOn

COOL

HEAT

Stop

I2:00

occupied

ProgramOn

COOL

HEAT

Override

0:30

I2:00

Programming Occupied & Unoccupied Periods

Page 8

Press

Press the Mode button. While holding the Mode,

press the Up button for 2 seconds to enter

time period programming.

Continued

Select the maximum # of

occupied periods to be

used on any one day.

Typically 1.

(1,2 or 3)

Adjust the cooling

setpoint for occupied 1.

Adjust the cooling

setpoint for unoccupied

periods.

Adjust the heating

setpoint for occupied 1.

(35 - 99 )

MODE

occupied 1

occupied COOL

HEAT

unoccupied COOL

MODE

Programming Occupied & Unoccupied Periods

Page 9

Press

Continued

Adjust the heating set-

point for unoccupied

periods.

(35 - 99)

Select the day for

Occupied 1.

Adjust the stop time

for occupied 1.

Select Occupied 1 to run

on this day (On), or not to

run this day (Off).

Adjust the start time

for occupied 1.

(M - S)

Off

MODE

unoccupied

HEAT

occupied

Am Start

7:00

occupied

Pm Stop

6:00

occupied

Andere Handbücher für AQUAZONE 50QE900-250FS

Inhaltsverzeichnis

Andere Carrier Thermostat Handbücher

Carrier

Carrier KSACN0401AAA Bedienungsanleitung

Carrier

Carrier Performance EDGE Bedienungsanleitung

Carrier

Carrier User interface Comfort Module Series Betriebsanleitung

Carrier

Carrier 50QE900-511WS Bedienungsanleitung

Carrier

Carrier A94134 Anleitungen und Rezepte

Carrier

Carrier Cor Bedienungsanleitung

Carrier

Carrier Thermostat Anleitungen und Rezepte

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Carrier

Carrier Comfort series Bedienungsanleitung

Carrier

Carrier CONNECT 33CONNECTSTAT Bedienungsanleitung

Carrier

Carrier 33CS400-01 Bedienungsanleitung

Carrier

Carrier edge Performance TP PHP01 A Series Bedienungsanleitung

Carrier

Carrier Comfort Pro 33CSCNACHP-01 Bedienungsanleitung

Carrier

Carrier TSTATCCNTT01-B Bedienungsanleitung

Carrier

Carrier TSTATCCNAC01-C Bedienungsanleitung

Carrier

Carrier 53DFST2-NP Bedienungsanleitung

Carrier

Carrier 33CS Bedienungsanleitung

Carrier

Carrier Thermidistat Montageanleitung

Carrier

Carrier TP-WEM01 Bedienungsanleitung

Carrier

Carrier N-MC-FC Betriebshandbuch

Carrier

Carrier ComfortVu TB-24-HM Betriebsanleitung

Carrier

Carrier Programmable Thermostats Anleitungen und Rezepte

Carrier

Carrier TB-PAC Bedienungsanleitung

Carrier

Carrier Comfort series Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung