Casablanca MA038-01 Bedienungsanleitung

Compatible with:

2xxxx Types A - Z

51000-58999 fan series

59500-59999 fan series

Select Casablanca Fans

Models 99258, 99259, 99260

MA038-01 • 04/27/15

Ceiling Fan Light KitCeiling Fan Light Kit

Installation Manual

Low ProleLow Prole

MA038-01 • 04/27/15

1.888.830.1326

Your light kit is compatible with most ceiling fans. The light kit will attach to the fan’s

switch housing. Begin on page 3 where you will choose the type of switch housing that

most closely resembles the one on your fan. From there, you will be directed to the set of

assembly instructions that are appropriate for installing the light kit to your fan.

Read entire installation instructions carefully before

beginning installation and save these instructions.

BEFORE YOU BEGIN

Switch

Housing

READ AND SAVE THESE INSTRUCTIONS

This product conforms to UL Standard 507.

WARNINGS

w.1 - To reduce the risk of re, electrical shock, or personal injury,

mount fan directly from building structure and/or an outlet box marked

acceptable for fan support of 70 lbs. (31.8 kg) and use the mounting screws

provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your

fan, disconnect the power by turning off the circuit breakers to the outlet

box and associated wall switch location. If you cannot lock the circuit

breakers in the off position, securely fasten a prominent warning device,

such as a tag, to the service panel.

c.1 - All wiring must be in accordance with national and local electrical codes

ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied electrician.

CAUTIONS

Turn Power

OFF

MA038-01 • 04/27/15

1.888.830.1326

If your fan’s switch housing cap resembles

this one, remove the whole switch

housing by removing the switch housing

screws with a Phillips head screwdriver.

Remove the two cap screws from the

inside of the switch housing. Reinstall

the switch housing. Tighten the switch

housing screws. Then follow the TYPE-A

ASSEMBLY INSTRUCTIONS on pages 4-5.

If your fan’s switch housing cap

resembles this one, remove the cap

screws with a Phillips head screwdriver.

Then follow the TYPE-A ASSEMBLY

INSTRUCTIONS on pages 4-5.

Switch

Housing

Cap

Screw

WHICH ASSEMBLY METHOD WILL I USE?

Switch

Housing

Cap

Switch

Housing

Screw

If your fan’s switch housing cap resembles

this one, remove the whole switch

housing by removing the switch housing

screws with a Phillips head screwdriver.

Remove the plug button using a standard

screwdriver. Then follow the TYPE-C

ASSEMBLY INSTRUCTIONS on pages 8-9.

Switch

Housing

Screw

Plug

Button

If your fan’s switch housing cap

resembles this one, remove the whole

switch housing by removing the switch

housing screws with a Phillips head

screwdriver. Remove the plug button.

Then follow the TYPE-B ASSEMBLY

INSTRUCTIONS on pages 6-7.

Switch

Housing

Screw

Plug

Button

Choose one of the four images below that most closely resembles the switch

housing on your fan; then follow the instructions under the image.

MA038-01 • 04/27/15

1.888.830.1326

Lift the light kit up to meet the lower

switch housing. Attach the light kit to

the switch housing using the keyhole

slots to engage the light kit screws.

Rotate clockwise. Tighten screws securely

through the access holes.

If necessary, attach the extension chain

provided to the fan pull chain coming

from the switch housing. Then feed the

end of the extension chain through the

grommeted hole in the light kit.

Screw the two light kit screws halfway into

the switch housing. Using the single pin

connectors, connect the black or blue wire

from the fan to the black wire from the

light kit. Connect the white wire from the

fan to the white wire from the light kit.

TYPE-A ASSEMBLY INSTRUCTIONS

Do not allow the light kit to hang

only by the wire connections!

If your fan does not have pin connectors on

the wires coming from the switch housing,

install the wiring harness provided. Using

the provided wire connectors connect the

white wire from the fan to the white wire

from the wire harness and connect the

black or blue wire from the fan to the black

wire from the wire harness.

Wire

Connector

Switch

Housing

Light Kit

Screw

1 2

Grommeted

Hole

Light Pull

Chain

Fan Pull

Chain

Access

Hole

MA038-01 • 04/27/15

1.888.830.1326

Installing the Pull chain pendant -

Attach the pull chain pendants to the

end of the short chains coming from the

switch housing and the light kit. Turn on

power. Your installation is complete!

Installing the bulb - Install a bulb into each

socket. When necessary, replace bulbs with

bulbs of same type and wattage.

Installing the globe - Press the globe

ush against the metal plate. Thread

the light pull chain through the hole in

the center of the nial cap and thread

the fan pull chain through the hole in

the side of the cap. Finally, thread only

the light pull chain through the hole in

the nial and screw the nial onto the

threaded rod.

TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)

Globe

Finial

Cap

Finial

Socket

MA038-01 • 04/27/15

1.888.830.1326

TYPE-B ASSEMBLY INSTRUCTIONS

Using the single pin connectors, connect

the black or blue wire from the fan to the

black wire from the light kit. Connect the

white wire from the fan to the white wire

from the light kit.

If your fan does not have pin connectors on

the wires coming from the switch housing,

install the wiring harness provided. Using

the provided wire connectors connect the

white wire from the fan to the white wire

from the wire harness and connect the

black or blue wire from the fan to the black

wire from the wire harness.

Screw the two light kit screws halfway

into the switch housing. Feed the light kit

wires through the center hole in the switch

housing. Lift the light kit up to meet the

lower switch housing. Attach the light kit

to the switch housing using the keyhole

slots to engage the light kit screws.

Rotate clockwise. Tighten screws securely

through the access holes.

Lift the light kit assembly up so that the

screw holes in the lower switch housing

line up with the holes in the upper switch

housing. Install the switch housing

screws and tighten securely.

Switch

Housing

Screw

Wire

Connector

Switch

Housing

Do not allow the light kit to hang

only by the wire connections!

Light Kit

Screw

Switch

Housing

1 2

Access

Hole

MA038-01 • 04/27/15

1.888.830.1326

Installing the bulb - Install a bulb

into each socket. When necessary,

replace bulbs with bulbs of same

type and wattage.

If necessary, attach the extension chain

provided to the fan pull chain coming

from the switch housing. Then feed the

end of the extension chain through the

grommeted hole in the light kit.

TYPE-B ASSEMBLY INSTRUCTIONS (CONTINUED)

Installing the pull chain pendant -

Attach the pull chain pendants to the

end of the short chains coming from the

switch housing and the light kit. Turn

power on. Your installation is complete.

Installing the globe - Press the globe

ush against the metal plate. Thread the

light pull chain through the hole in the

center of the nial cap and thread the fan

pull chain through the hole in the side of

the cap. Finally, thread only the light pull

chain through the hole in the nial and

screw the nial onto the threaded rod.

Globe

Finial Cap

Finial

Socket

Grommeted

Hole

Light Pull

Chain

Fan Pull

Chain

MA038-01 • 04/27/15

1.888.830.1326

Lift the light kit assembly up so that the

screw holes in the lower switch housing

line up with the holes in the upper switch

housing. Install the switch housing

screws and tighten securely.

Upper

Switch

Housing

Using the single pin connectors, connect

the black or blue wire from the fan to the

black wire from the light kit. Connect the

white wire from the fan to the white wire

from the light kit.

Feed the wires through the switch

housing cap, washer, and nut. Then

install the switch housing cap by twisting

clockwise onto the threaded rod. Install

the washer and nut onto threaded rod

and tighten securely.

Threaded

Rod

Washer

and Nut

TYPE-C ASSEMBLY INSTRUCTIONS

If your fan does not have pin connectors on

the wires coming from the switch housing,

install the wiring harness provided. Using

the provided wire connectors connect the

white wire from the fan to the white wire

from the wire harness and connect the

black or blue wire from the fan to the black

wire from the wire harness.

Wire

Connector

Switch

Housing

Do not allow the light kit to hang

only by the wire connections!

1 2

MA038-01 • 04/27/15

1.888.830.1326

TYPE-C ASSEMBLY INSTRUCTIONS (CONTINUED)

If necessary, attach the extension chain

provided to the fan pull chain coming

from the switch housing. Then feed the

end of the extension chain through the

grommeted hole in the light kit.

Installing the pull chain pendant -

Attach the pull chain pendants to the

end of the short chains coming from the

switch housing and the light kit. Turn

power on. Your installation is complete.

Installing the globe - Press the globe

ush against the metal plate. Thread the

light pull chain through the hole in the

center of the nial cap and thread the fan

pull chain through the hole in the side of

the cap. Finally, thread only the light pull

chain through the hole in the nial and

screw the nial onto the threaded rod.

Globe

Finial

Cap

Finial

Installing the bulb - Install a bulb

into each socket. When necessary,

replace bulbs with bulbs of same

type and wattage.

Socket

Grommeted

Hole

Light Pull

Chain

Fan Pull

Chain

MA038-01 • 04/27/15

1.888.830.1326

ONE YEAR WARRANTY

This product is warranted to the original purchaser by Casablanca Fan Company/

Hunter Fan Company against defects in material and workmanship for one (1)

year from date of purchase. During the warranty period, we will repair or, at our

option, replace a defective product at no charge. For information on how to obtain

service, contact the Casablanca/Hunter Service Department by calling our toll-

free number at 888-830-1326. Damage to the product caused by mishandling,

improper installation or modication is not covered by this warranty. This warranty

is given in lieu of all other warranties expressed or implied. Some states do not allow

limitations of time on an implied warranty, therefore the above limitations may not

apply in every case. This warranty states specic legal rights which may vary from

state to state.

TROUBLESHOOTING

Lights don’t come on.

• Make sure that the bulbs are properly installed.

• Make sure power switch is on.

• Pull the pull chain to make sure it is on.

• Check the circuit breaker to ensure the power is turned on.

• Check the pin connections in the light kit.

• Refer to the fan manual for locating the fan’s wiring. Verify that the light and power

wires are correctly connected to the ceiling and the light kit.

If you have problems installing or operating your light kit, do not return this product

to the dealer. Call our Consumer Affairs Hotline.

888-830-1326

Inhaltsverzeichnis

Andere Casablanca Lüfter Handbücher

Casablanca

Casablanca Ainsworth Gebrauchsanweisung

Casablanca

Casablanca Atria Bedienungsanleitung

Casablanca

Casablanca La FLeur Bedienungsanleitung

Casablanca

Casablanca Caneel Bay Gebrauchsanweisung

Casablanca

Casablanca WHITMAN Bedienungsanleitung

Casablanca

Casablanca 99050 Bedienungsanleitung

Casablanca

Casablanca Cathay Bedienungsanleitung

Casablanca

Casablanca 54032 Bedienungsanleitung

Casablanca

Casablanca Panama 55028 Bedienungsanleitung

Casablanca

Casablanca Isotope Bedienungsanleitung

Casablanca

Casablanca 59500 Handbuch

Casablanca

Casablanca Panama EnErgy Star C66U11B Bedienungsanleitung

Casablanca

Casablanca Areto 54120 Bedienungsanleitung

Casablanca

Casablanca 59021A Handbuch

Casablanca

Casablanca AURORA Bedienungsanleitung

Casablanca

Casablanca S3 Bedienungsanleitung

Casablanca

Casablanca C42GxxxL Bedienungsanleitung

Casablanca

Casablanca M6006-01 Bedienungsanleitung

Casablanca

Casablanca bel-air Bedienungsanleitung

Casablanca

Casablanca Lanai Bedienungsanleitung

Casablanca

Casablanca Bel Air Halo Bedienungsanleitung

Casablanca

Casablanca 42900-01W Bedienungsanleitung

Casablanca

Casablanca M8517-01 Bedienungsanleitung

Casablanca

Casablanca WHITMAN Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung