Casall XTR200 Bedienungsanleitung

INOOR BIKE –XTR200

91106

EXERCISE BIKE

USER MANUAL

＊Consult your physician before starting with any exercise program to receive advice on the optimal training.

＊Warning: incorrect/ excessive training can cause health injuries. Stop using the bike when feeling

uncomfortable.

＊Please follow the advice for correct training as detailed in the training instructions.

＊Ensure that training only starts after correct assembly, adjustment and inspection of the bike.

＊Always start with a warm-up session.

＊Only use original parts as delivered

＊Follow the steps of the assembly instruction carefully.

＊Only use suitable tools for assembly and ask for assistance if necessary

＊Place the bike on an even, non-slippery surface.

＊For all adjustable parts be aware of the maximum position to which they can be adjusted.

＊Tighten all adjustable parts to prevent sudden movement while training.

＊This product is designed for adults. Please ensure that children only use it under the supervision of an adult.

＊Ensure that those present are aware of possible hazards, e.g. movable parts during training.

＊The resistance level can be adjusted to your personal preference.

＊Do not use the bike without shoes or loose shoes.

＊Ensure that sufficient space is available to use the bike.

＊Be aware of non-fixed or moving parts whilst mounting or dismounting the bike.

Safety Instructions

»To protect the floor or carpet from damage, place a mat under the exercise Bike.

»In case of emergency please place both feet at the same time on the side reins.

»Ensure that an area of 2000 x 1000 mm behind the exercise Bike is free from any obstacles.

»This product is tested up to a maximum body weight of 120 kilograms.

»We take no responsibility for personal injury or damage sustained by or through the use of this exercise Bike.

Assembly Drawing

Assembly

Step one

Attach the front (16) and rear feet (12) to the frame using the bolts (10),

washer (9) and nuts (8).

Step two

The handlebar post already set up when you received. Attach the

handlebar post inserting into the head tube of the frame. Adjust the

height and then securely tighten the knob (44) in proper position.

Step three

Insert the seat tower (17) into the frame’s seat tube, adjust the height

and then fix in position with knob. Insert the seat slider (2) into the seat

tower and fix using the knob (19). Attach the saddle (1) into seat slider.

Step four

Attach the pedals (11) into the crank arms(7), each pedal is marked

with the L (left) or R (right) to denote the side of the indoor bike they are

on, Note- the right hand crank is on the same side as the chain guard

(24). Be careful to align the threads correctly to avoid any damage.

A little grease on the threads should help the pedals to screw in easily

and correctly, tighten using a 15mm spanner; both pedals threads

should tighten towards the front of the spinning bike.

Adjusting the resistance

To adjust the exercising resistance on the complete spinning bike by the

brake knob (35) of brake system, and then simply loosen (-) or tighten

(+).

The flywheel should rotate freely without resistance when you loosen (-)

the brake system totally.

More experienced riders may wish to increase the overall resistance by

tighten (+) the brake system totally.

Exploded Drawing

Part list

No.

Name

Unit

No.

Name

Unit

Saddle

Handlebar stem end cap

Seat slider

Crank bolt

Stem Cap

Flywheel security nut

Seat tower rubber cap

Flywheel security washer

Frame

Brake system

SET

Chain

Flywheel adjuster bolt

Crank arm set

SET

Outer chain guard bolt (M5)

Foot tube nut

Outer chain guard bolt (M6)

Foot tube washer

Flywheel

SET

Foot fixing bolt

Screw & nut

Pedal

Brake pad holder

SET

Rear foot tube

Brake pad

Front foot end cap

Rubber cap for seat post

Rear foot end cap

Knob

Rear foot adjuster wheel

Knob washer

Front foot tube

Alloy bind clip / L

Seat tower

Knob spring

Saddle extender rubber cap

Alloy bind clip / R

Seat extender knob

Knob plastic washer

Handle Bar End Plug

Knob fixed bolt

Handlebar

Knob washer

21-1

Handlebar grip

Handlebar stem bolt

Chain Guard (Outer, Inner)

SET

Elbow pad w/holder, bolt, nut

Flywheel axle w/ nut

SET

Screw for spring bracket

Fixed wheel sprocket

Spring bracket

Flywheel bearing

Flywheel cover w/bolt

BB axle set

SET

Bottle cage

Screw of bottle cage

30-1

Washer of bottle cage

Instruction Use

1) The model bike has a fixed wheel driven flywheel and should only be used under

professional supervision.

2) Installation –it is important that the bike is correctly assembled and we recommend

that suitably qualified personnel carry out installation and assembly.

3) Handlebar and seat adjustment. It is important that the handlebar and seat are set

at the correct height for your body. Ask your instructor for assistance. Adjusting the

handlebar height-Undo the knob that is located where the stem fits into the frame.

Slide the handlebar/stem up or down to the required height and retighten the knob.

Make sure it is securely tightened and that there is no lateral or vertical movement

of the handlebar.

Adjusting the seat height- undo the knob located where the seat tower fits into the

frame. Adjust the seat tower to the required height. Then retighten the knob.

Make sure it is tight enough to prevent the seat from twisting side to side. The seat

position can be adjusted forwards and backwards. Undo the knob located directly

below the seat slider. Loosen the knob then slide the seat to the required position.

Then make sure the knob retighten.

4) Pedals and toe straps- your feet should be securely positioned in the toe clips during

the exercise. Put your foot as far forwards as you can into the toe-clip and then

pull the strap tight.

5) The bike should operate on a level surface with no lateral movement. There is

height adjuster caps located on either side underneath the rear foot. Turn these

caps clockwise or anti-clockwise until the bike is totally stable on the ground.

6) Emergency brake –Press down brake system (35) for stop.

7) Maintenance –It may be unsafe when loosen bolt on the parts or noise on the

flywheel, please contact your supplier. Like any other mechanical cycling device,

the bike should be regularly maintained. Ask your supplier for a detailed

maintenance program.

Maintenance Chart

DESCRIPTION

Daily

Weekly

Monthly

Quarterly

Annually

Wipe machine down

Spray with WD40 or similar oil

on frame

Visual check

Check security of handlebar

post &seat clamp

Check security of saddle

Remove handlebar stem and

clean tube

Remove seat and clean tube

Check brake pads for wear-

align

Check brake adjustment

10.

Check security of all clamps

& fasteners

11.

Check toe straps for signs of

wear

12.

Check crank bolts and

re-tighten

13.

Make sure pedals are screwed

14.

Wipe the anti-rust oil on the

flywheel

15.

Check chain tension

16.

Oil chain

17.

Check bottom bracket

18.

Check flywheel bearings

Limited Warranty

This product carries the following guarantee against manufacturing

defects:

* Frame is warranted for 2 years from the date of purchase.

* Components are warranted for 1 year.

* Warranty is only valid for the original purchaser.

* Labor and freight charges are not included.

* Normal wear, neglect, abuse, accidents, improper assembly or

maintenance, or the installation of parts or accessories not

compatible with the original intended use of the bike, as sold, are

not covered by the warranty.

* Neither does it cover any corrosion caused by failure to clean the

bikes on regular basis.

* This warranty is limited to the repair or replacement of the defective

part at no cost. The supplier shall in no event be responsible for

consequential, special damages, and any parts failures, breakages

or injuries resulting from misuse of the machine or failure to follow

the recommended maintenance procedures.

* Warranty claims must be through an authorized dealer, and

replacement parts will normally be dispatched to you. We

recommend you held a small stock of basis spare parts, as well as a

tool kit to cover the regular maintenance routines.

* The Limited Warranty is the only express or implied warranty

applicable to original supplier. Any implied warranties, including

warranties of merchantability and fitness shall be limited in scope and

duration in accordance with this limited warranty.

INDOOR BIKE

Inhaltsverzeichnis

Andere Casall Heimtrainer Handbücher

Casall

Casall EB300 Bedienungsanleitung

Casall

Casall GRAVITY 1.2X Bedienungsanleitung

Casall

Casall EB100 Bedienungsanleitung

Casall

Casall BT10.5 91006 Bedienungsanleitung

Casall

Casall EB600 91003 Bedienungsanleitung

Casall

Casall 91004 Bedienungsanleitung

Casall

Casall Benefit B420 Bedienungsanleitung

Casall

Casall INFINITY 1.3B Bedienungsanleitung

Casall

Casall XTR600 Racing Bedienungsanleitung

Casall

Casall Mag Hybrid Kurzanleitung

Casall

Casall INDOOR BIKE XTR PRO Bedienungsanleitung

Casall

Casall 91002 Bedienungsanleitung

Casall

Casall EB600 Bedienungsanleitung

Casall

Casall EB100 Bedienungsanleitung

Casall

Casall EB200 Bedienungsanleitung

Casall

Casall XTR PRO 91025 Bedienungsanleitung

Casall

Casall Inifinity Hybrid Kurzanleitung

Casall

Casall 91023 Bedienungsanleitung

Casall

Casall 91022 Bedienungsanleitung

Casall

Casall INFINITY 1.1B 91017 Bedienungsanleitung

Beliebte Heimtrainer Handbücher anderer Marken

Weslo

Weslo Vector 302 Kurzanleitung

TOORX

TOORX BRX85 Bedienungsanleitung

Matrix

Matrix KranKcycle Bedienungsanleitung

Matrix

Matrix IC3 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Bedienungsanleitung

Monark

Monark 827E Bedienungsanleitung

Stamina

Stamina 1310 Bedienungsanleitung

American Fitness

American Fitness SPR-BK1072A Bedienungsanleitung

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung

BH FITNESS

BH FITNESS H9158H Bedienerhandbuch

Body Sculpture

Body Sculpture BC-7220G Bedienungsanleitung

Cateye

Cateye EC-2300 Bedienungsanleitung

FYTTER

FYTTER RACER RC MSR Bedienungsanleitung

Kikos

Kikos HM-9090M Bedienungsanleitung

Pro-Form

Pro-Form 345 Zlx Bike Benutzerhandbuch

Fuel Fitness

Fuel Fitness SU135-40 Bedienungsanleitung

NordicTrack

NordicTrack Gxr 4.2 Bike Bedienungsanleitung

Vision Fitness

Vision Fitness U70 Bedienungsanleitung