Cateye PADRONE DIGITAL CC-PA400B Bedienungsanleitung

SET 4

Using the app

Using the unit

Appendix

Cover,

Introduction

CATEYE

PADRONE

DIGITAL

CYCLOCOMPUTER

CC-PA400B

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use

of such marks by CATEYE Co., Ltd. is under license. Other trademarks and trade names

are those of their respective owners.

• This instruction manual is subject to change

without notice. See our website for the latest

instruction manual (PDF).

• Please visit our website, where a detailed

Quick Start manual containing videos can be

downloaded.

http://www.cateye.com/products/detail/CC-PA400B/manual/

Setting up

the

PADRONE DIGITAL

Smartphone

PADRONE DIGITAL

Mounting

the PADRONE DIGITAL

Wearing

the heart rate sensor

Introduction

Starting measurement

Changing settings

Capabilities with a smart-

phone (Cateye Cycling™)

Warning / Caution

Product Warranty, etc.

SET 4

Using the app

Using the unit

Appendix

Cover,

Introduction

The PADRONE DIGITAL is a cyclocomputer that uses Bluetooth® SMART sensors. In

addition to the included sensors, optional or commercial sensors can also be connected

for use.

Mounting the PADRONE DIGITAL, Wearing the heart rate sensor

If you have purchased the double wireless kit

The model you have purchased does not come with the heart rate sensor and HR strap.

You can use all the functions written in this instruction manual, such as measurements

related to your heart rate, by using an optional heart rate sensor kit.

• Mount the bracket (Page 3)

• Mounting the speed/cadence sensor (ISC-12) (Page 5)

• Wearing the heart rate sensor (HR-12) (Page 9)

* For detailed explanations on how to use CATEYE sensors such as mounting, or pairing,

see the sensor’s Online Manual (on our website) or the Quick Start Manual (PDF/smart-

phone app).

Setting up the PADRONE DIGITAL

The ﬁrst time that you use this product, perform the initial setup from the PADRONE

DIGITAL or from a smartphone (Cateye Cycling™).

Use the method corresponding to your device to set up the PADRONE DIGITAL. You can

change the display of its measurement screen and its total distance value as necessary.

* If you have a smartphone, you can use the “Cateye Cycling™” smartphone app (free of

charge) to easily set up the PADRONE DIGITAL.

• If you do not have a smartphone

1. Setup with the PADRONE DIGITAL (Page 11)

2. Changing settings (Page 22)

• If you have a smartphone

1. Setup with a smartphone (Cateye Cycling™) (Page 15)

2. Capabilities with a smartphone (Page 31)

Introduction

Cover,

Introduction

SET 4

Using the app

Using the unit

Appendix

1/8

• When mounting on handlebar

Mount the bracket

The bracket can be mounted on either the stem or the handlebar.

Mount the bracket

• When mounting on stem

Mounting the PADRONE DIGITAL

Cut

Cutting band after mounting

Caution!:

Cut the bracket band so

that cut end will not cause

injury.

Dial

Handlebar

Bracket band

Bracket

rubber pad

Stem

Bracket band

Bracket

rubber pad

Bracket band Bracket DialBracket rubber pad

Cover,

Introduction

SET 4

Using the app

Using the unit

Appendix

2/8

Attach/detach PADRONE DIGITAL

Mounting the PADRONE DIGITAL

Mount the bracket

Hold PADRONE DIGITAL.

Push out so that front lifts up.

Click

Cover,

Introduction

SET 4

Using the app

Using the unit

Appendix

3/8

• Mounting on top of chain stay

Mounting the speed/cadence sensor (ISC-12)

The speed (cadence) sensor can be mounted either on the top or bottom of the chain stay.

• Mounting on bottom of chain stay

Caution!:

If the speed (cadence) sensor is mounted on the bottom of the chain stay rather than

on the top, the adjustment range between the sensor and the magnet will be narrower.

* If using pedals with steel axles, the cadence magnet can be attached magnetically to the

pedal axle.

* For detailed explanations on how to use CATEYE sensors such as mounting, or pair-

ing, see the sensor’s Online Manual (on our website) or the Quick Start Manual (PDF/

smartphone app).

* The following mounting procedure gives instructions for mounting on the top of the

chain stay.

Mounting the PADRONE DIGITAL

Cadence magnet

Speed (cadence)

sensor

Speed (cadence) sensor

Wheel magnet

Cadence magnet

Nylon tie (x5)

Sensor rubber pad

Speed/Cadence

sensor

(ISC-12)

Cover,

Introduction

SET 4

Using the app

Using the unit

Appendix

4/8

Temporarily attach the sensor to the left chain stay.

(1) Loosen the sensor screw using a Phillips screwdriver and check that the sen-

sor arm moves.

(2) Attach the sensor rubber pad to the sensor.

Sensor rubber pad

(3) Refer to the illustration and temporarily attach the sensor to the left chain stay

with nylon ties.

Caution!:

Do not fully tighten the nylon ties.

Once the nylon ties are fully tightened they cannot be removed.

Nylon tie

Sensor arm

Sensor screw

Left chain stay

Mounting the PADRONE DIGITAL

Mounting the speed/cadence sensor (ISC-12)

Cover,

Introduction

SET 4

Using the app

Using the unit

Appendix

5/8

Temporarily attach the magnet.

Nylon tie

Sensor zone

(CADENCE) side Sensor zone (SPEED) side

Cadence

magnet Spoke

Wheel magnetSensor zone (CADENCE)

Sensor zone (SPEED)

(1) Using a nylon tie, temporarily attach the cadence magnet to the inside of the

left crank arm so that it faces the cadence sensor zone.

* If using pedals with steel axles, the cadence magnet can be attached mag-

netically to the pedal axle. In this case, remove the adhesive tape from the

magnet and do not use the nylon tie.

(2) Rotate the sensor arm and temporarily attach the wheel magnet to a spoke

facing the speed sensor zone.

* Reposition the sensor and the magnets if both magnets (speed and cadence)

cannot pass through their respective sensor zones.

Mounting the PADRONE DIGITAL

Mounting the speed/cadence sensor (ISC-12)

Cover,

Introduction

SET 4

Using the app

Using the unit

Appendix

6/8

Adjust the gap between the sensor zone and the magnet.

(1) Tilt the sensor so that the gap between the cadence magnet and the cadence

sensor zone is approximately 3 mm, then fasten the sensor securely with

nylon ties. 3 mm

Cadence magnet

(2) Rotate the sensor arm so that the gap between the wheel magnet and the

speed sensor zone is approximately 3 mm, then tighten the sensor screw

securely. 3 mm

3 mm

Sensor screw

Wheel magnet

Secure all parts.

Securely tighten the sensor’s nylon ties, the sensor screw, the wheel magnet, and

the cadence magnet so that they do not move, and then check that these items are

not loose.

Trim off the excess nylon tie.

Mounting the PADRONE DIGITAL

Mounting the speed/cadence sensor (ISC-12)

Cover,

Introduction

SET 4

Using the app

Using the unit

Appendix

7/8

Wearing the heart rate sensor (HR-12)

Heart rate is measured by wearing a heart rate sensor around the chest.

* The double wireless kit does not include a heart rate sensor. Purchase this item sepa-

rately.

Before wearing the heart rate sensor

Warning!!!:

Never use this device if you use a pacemaker.

• To eliminate measurement errors, it is recommended to moisten the electrode pads

with water or apply electrolyte cream to the pads.

• If you have sensitive skin, moisten the electrode pads with water and wear it over a

thin shirt.

• Chest hair may interfere with measurement in some cases.

* For detailed explanations on how to use CATEYE sensors such as mounting, or pair-

ing, see the sensor’s Online Manual (on our website) or the Quick Start Manual (PDF/

smartphone app).

Attach the sensor to the HR strap.

Press until you hear a clicking sound.

Heart rate sensor

HR strap

Heart rate sensor

(HR-12) HR strap

Cover,

Introduction

SET 4

Using the app

Using the unit

Appendix

8/8

Wear the HR strap by sliding the hook over the other end of

the strap.

Wind the HR strap around your body and adjust the length to suit your chest (un-

derbust). Overtightening the strap may cause discomfort during measurement.

Hook Back side

Electrode pads

* Wear the heart rate sensor so that TOP faces up.

* Ensure that the electrode pads are in close contact with your body.

* If you have dry skin or are wearing the sensor over a shirt, measurement errors

may result. In such cases, moisten the electrode pads with water.

Wearing the heart rate sensor (HR-12)

Andere Handbücher für PADRONE DIGITAL CC-PA400B

Inhaltsverzeichnis

Andere Cateye Fahrradzubehör Handbücher

Cateye

Cateye WEARABLEX SL-WA100 Bedienungsanleitung

Cateye

Cateye RAPID X2 Bedienungsanleitung

Cateye

Cateye Padrone Smart CC-PA500B Bedienungsanleitung

Cateye

Cateye V3N Bedienungsanleitung

Cateye

Cateye VELVO 5 Bedienungsanleitung

Cateye

Cateye MSC 2DX Gebrauchsanweisung

Cateye

Cateye Micro wireless CC-MC200W Bedienungsanleitung

Cateye

Cateye RAPIDmicro G Bedienungsanleitung

Cateye

Cateye CC-ST250 Bedienungsanleitung

Cateye

Cateye Reflex TL-LD560-F Montageanleitung

Cateye

Cateye PADRONE SMART Bedienungsanleitung

Cateye

Cateye MITY 3 Bedienungsanleitung

Cateye

Cateye Vectra CC-VT100W Bedienungsanleitung

Cateye

Cateye EL135 Bedienungsanleitung

Cateye

Cateye CC-RS100W Fehlerbehebungshandbuch

Cateye

Cateye TL-LD1000 Gebrauchs- und Pflegehandbuch

Cateye

Cateye STRADA CADENCE CC-RD200 Bedienungsanleitung

Cateye

Cateye MICRO Wireless Bedienungsanleitung

Cateye

Cateye MSC 3Dx Bedienungsanleitung

Cateye

Cateye VELO5 Bedienungsanleitung

Cateye

Cateye Padrone Smart + CC-SC100B Leitfaden

Cateye

Cateye MITY 8 Bedienungsanleitung

Cateye

Cateye Padrone Smart + CC-SC100B Leitfaden

Cateye

Cateye STRADA CC-RD100N Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung

Key-Disp

Key-Disp KD31M Bedienungsanleitung

SiliconCoach

SiliconCoach Dialed in Motion Bedienungsanleitung