Cateye Strada Smart CC-RD500B Einrichtungshandbuch

* Instructions differ depending on the devices you have.

For troubleshooting related to the smart computers or to Cateye Cycling™, see "Frequently

Asked Questions".

* For explanatory purposes, in this manual red text/icons on the smart computer screen

represent ﬂashing items.

* The display screens and illustrations used in this manual are provided for instructional

purposes only. Actual screens and illustrations may differ depending on devices used.

* The online manual and YouTube videos for this product are subject to change without

notice.

Usage Instructions

Select the devices you have.

Setup method

Setup with smartphone

Setup method

If you have purchased smart computer

Checking package contents

Setup (first time only)

Mounting the bracket

If you have not yet purchased smart computer

Setup (first time only)

Optional accessories

Mounting the speed (cadence) sensor (ISC-12)

Wearing the heart rate sensor (HR-12)

* Mount non-CatEye sensors as directed in relevant instruction manuals.

Setup with smartphone

Checking package contents

Smart computer unit

Bracket band

Bracket

Bracket rubber pad

Dial

* The Speed + Cadence Kit includes an integrated speed (cadence) sensor (ISC-12) in

addition to the items above.

* The Triple Wireless Kit includes an integrated speed (cadence) sensor (ISC-12) and a heart

rate sensor (HR-12).

Mounting the bracket

Setup

Checking package contents

Setup

Setup with smartphone

Setup uses the Cateye Cycling™ smartphone app (free).

1. Install Cateye Cycling™.

If using an iPhone

If using an Android smartphone

Smartphone

Pullfreethesmartcomputer'sinsulationsheet.

After you pull free the insulation sheet, return the battery cover to its previous location.

* If characters are lit on the LCD screen, you can use the product as is.

Insulation

sheet

Padrone Smart

Open

Insulation

sheet

Strada Smart

Press

Slide

Waterproof

inner cap

Smart computer

When you use this device for the ﬁrst time, follow the procedure below to set the smartphone

and smart computer.

* See Cateye Cycling Recommended Devices for the latest information about

smartphones recommended for use with Cateye Cycling™.

2. Launch Cateye Cycling™.

Follow the on-screen instructions and allow the use of GPS and Bluetooth® devices.

Once basic settings are complete the Trip screen appears.

3. Pair smart computer with sensors.

When the smartphone's Bluetooth settings are turned on, it will search for devices, but

do not conﬁgure settings at this stage. Switch to Cateye Cycling™ and follow the

procedure below.

Important

• Pairing (sensor ID synchronization) must be performed in order to use smart computer

and sensors.

• Do not pair sensors at a race venue or in similar locations where there are many other

users. Doing so may cause smart computer to be paired with another device.

Important

From (MENU) at the top left of the screen, turn on [Connect], and then tap [Device].

Tap [Device Pairing] to start pairing.

For instructions on using devices, refer to the following:

Pairing with smart computer

Smart computer

1. Format (initialize) smart computer.

All data will be deleted and smart computer will be reset to factory default settings.

Caution

While holding down the MENU button on smart computer, press the AC button.

When Cateye Cycling™ detects smart computer, a message is displayed on the

smartphone.

Tap [Pairing] to complete pairing.

* If you are using Padrone Smart with an iPhone, a subsequent message will be

displayed.

Tap [Pair] again.

After pairing is completed, from (MENU) at the top left of the screen, tap [Trip] to

switch to the Trip screen.

Smartphone

Smart computer

The whole display turns on and then switches to the smartphone search screen.

Whole display

turns on

Smartphone search

screen

* If smart computer switches to the measurement screen without the whole screen

turning on, it has not been formatted. Redo the procedure.

* The appearance of the smart computer screen depends on the state of Cateye

Cycling™.

Pairing with a sensor

1. Activate the sensor.

Activating the sensor

When Cateye Cycling™ detects the sensor signal, a message is displayed on the

smartphone.

Tap [Pair]. The synchronized sensor is displayed on the [Device] screen and pairing is

completed.

* When pairing a sensor with Cateye Cycling™, an "A" is displayed after the sensor

name.

* If you have paired a sensor capable of speed measurement, proceed to step 2.

2. Enter the tire circumference.

From the [Device] screen, tap the added sensor and select a tire circumference (the

length of the outer circumference of the tire).

Determining tire circumference

* Default value: 2096 mm (700x23c)

* Set tire circumference for each sensor.

* You can also change sensor names and cancel pairing from this screen.

Sensor pairing is now complete.

* Pair all sensors that you intend to use.

If you want to pair another sensor, repeat the same procedure again.

Smartphone

• Pair all sensors that you intend to use. If you want to pair another sensor, repeat the

same procedure again.

• When using an iPhone, you cannot sync settings of commercial sensors.

When measuring in Sensor Direct Mode, it is necessary to conﬁgure sensor settings

separately via smart computer.

1. Switching to Sensor Direct Mode

2. Pairing (Sensor ID synchronization)

3. Tire circumference setting

Important

Smart computer can be used with sensors compatible with Bluetooth 4.0. Pair it with

optional accessories or commercial sensors as required.

When pairing is complete, smart computer switches from the smartphone search screen

to the [ready] (measurement standby) display.

Smart computer pairing is now complete.

* If you have other sensors, continue pairing them.

Smartphone search

screen

Measurement

standby

Mounting the bracket

Switching to Sensor Direct Mode

Smartphone

Smart computer



1. Close Cateye Cycling™ or from (MENU), turn off [Connect].



2. Switch smart computer to Sensor Direct Mode.

Measurement screen

(Sensor Direct Mode)

Smartphone search

screen

(1 second)

* Smart computer will search for a sensor instead of your smartphone. In this mode, the

sensor icon ﬂashes to indicate sensor reception status.

•S(Flash):Whenthespeedsignalisreceived

•C(Flash):Whenthecadencesignalisreceived

•S/C(SandCﬂashsimultaneously):Whenthespeed/cadence(ISC)sensor

signalisreceived

•H(Flash):Whentheheartratesignalisreceived

•P(Flash):Whenthepowersignalisreceived

Sensor Direct Mode and Mirror Mode measure independently and data has no continuity.

Important

Pairing (Sensor ID synchronization)

Setup

Tire circumference setting

Switching to Sensor Direct Mode

Pairing (Sensor ID synchronization)

Pair a sensor that you want to use with smart computer.

• Pairing (sensor ID synchronization) must be performed in order to use a sensor.

• Do not pair sensors at a race venue or in similar locations where there are many other

users. Doing so may cause smart computer to be paired with another sensor.

• Pair all sensors that you intend to use.

Important

1. From the measurement screen, press MENU to switch to the menu

screen.

* When the menu screen is left on for 1 minute, smart computer returns to the

measurement screen.

2. Press MODE to display the screen shown below, and then press MODE

for 2 seconds.

3. Activate the sensor that you want to pair.

Activating the sensor

The synchronized sensor is displayed on the top of the screen and pairing is completed.

Measurement

screen

Menu screen

(Clock setting)

(2 seconds)

Ready for

synchronization

Sensor

activated

Synchronization

complete

Setup

Andere Handbücher für Strada Smart CC-RD500B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cateye Fahrradzubehör Handbücher

Cateye

Cateye TR200DW280P Bedienungsanleitung

Cateye

Cateye Micro wireless CC-MC200W Bedienungsanleitung

Cateye

Cateye STRADA CC-RD100 Bedienungsanleitung

Cateye

Cateye Rapid mini TL-LD635-R Bedienungsanleitung

Cateye

Cateye CC - VT100W Bedienungsanleitung

Cateye

Cateye Loop 2 SL-LD140RC-R Bedienungsanleitung

Cateye

Cateye CC-CD200N Bedienungsanleitung

Cateye

Cateye STRADA CADENCE CC-RD200 Bedienungsanleitung

Cateye

Cateye CC-PA100W Bedienungsanleitung

Cateye

Cateye VELO Wireless+ CC-VT235W Bedienungsanleitung

Cateye

Cateye VELO 5 Bedienungsanleitung

Cateye

Cateye MITY 3 Bedienungsanleitung

Cateye

Cateye Micro CC-6000 Bedienungsanleitung

Cateye

Cateye CC-MT200 Bedienungsanleitung

Cateye

Cateye CC-AT200W Bedienungsanleitung

Cateye

Cateye OS 1.0 Bedienungsanleitung

Cateye

Cateye MITY 3 Bedienungsanleitung

Cateye

Cateye Velo Wireless Bedienungsanleitung

Cateye

Cateye STRADA Bedienungsanleitung

Cateye

Cateye STEALTH EVO Bedienungsanleitung

Cateye

Cateye RAPID MICRO TLLD620R Bedienungsanleitung

Cateye

Cateye ENDURO 2 Gebrauchs- und Wartungshandbuch

Cateye

Cateye Astrale CC-CD100 N II Bedienungsanleitung

Cateye

Cateye CR123A Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung

Akku Vision

Akku Vision e-bike vision 10046 Kurzanleitung

Squire

Squire Inigma Bedienungsanleitung