READY WARM 9890 FORCE ROTATE
1716
5. TECHNICAL SPECIFICATIONS
Product reference: 05802
Product: Ready Warm 9890 Force Rotate
2000-2400 W, 220-240 V~, 50-60 Hz
Made in China | Designed in Spain
6. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), species that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old
appliances must be collected separately, in order to optimise the recovery
and recycling of the materials they contain, and reduce the impact on
human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation to
dispose of the appliance correctly.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.
7. TECHNICAL SUPPORT AND WARRANTY
This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
The product has been disassembled, modied, or repaired by persons, not authorised by the
ocial Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years,
based on current legislation, except consumable parts. In the event of misuse, the warranty
will not apply.
If at any moment you detect any problem with your product or have any doubt, do not
hesitate to contact Cecotec Technical Support Service at +34 963 210 728.
ENGLISH
1. PARTS AND COMPONENTS
Img. 1 (Page 18)
1. Temperature selector
2. Power-level selector
3. Power light indicator
4. Oscillation push button
2. BEFORE USE
Take the product out of the box and remove all packaging material.
Check for any visible damage, if any is observed, contact as soon as possible the Technical
Support Service of Cecotec for advice or reparation.
Place the heater on a at and stable surface.
3. OPERATION
Temperature selector: Turn it clockwise to increase the temperature or anticlockwise to
decrease it.
Power-level selector:
Symbol Function
Img. 2 O
Img. 3 Fan
Img. 4 Low-power heating
Img. 5 High-power heating
Oscillation push button: Press it so the device oscillates from one side to the other, spreading
warm air.
4. CLEANING AND MAINTENANCE
Always turn o, unplug and allow the appliance to cool down before cleaning.
Do not use abrasive scouring pads, powders or cleaners to clean the product.
Use a soft, dampened and clean cloth to clean the product’s outer housing. Be careful not to
touch the heating elements.
If the heater is not going to be operated for a long period of time, store it in a dry and safe
place where it is protected from dust.
ENGLISH
