CEM iLDM-30 Bedienungsanleitung
Please read this manual before switching the unit on.
Important safety information inside.
Please read this manual before switching the unit on.
Important safety information inside.
User Manual
Laser Distance Meter
Laser-Distanzmesser
Laser distance-mètre
Metro di distanza laser
Medidor Láser de Distancia
Laser Distance Meter User Manual
.................................................4
..............................................................6
...................................9
.........................................................11
..........................................................12
....................................................15
......17
..........................................18
............................................................19
Safety Instruction
Start-Up
Initial Operation and Setting
Measuring
Functions
9
The compact and handy base model was specifically designed for indoor applications.
Shortcut and Soft grip keys for addition, subtraction, area and volume calculation make
measuring fast and very reliable.
1.
2.
3.
4.
5.
6.
7.
8.
.
Technical Data
Troubleshooting-Causes and Corrective Measures
Measuring Conditions
Labelling
Content
Laser Distance Meter User Manual
3
• Measuring distances
• Computing functions, e. g. areas and volumes
• Using the instrument without instruction
• Using outside the stated limits
• Deactivation of safety systems and removal of explanatory and hazard labels
• Opening of the equipment by using tools (screwdrivers, etc.), as far as not specifically permitted for certain cases
• Carrying out modification or conversion of the product
• Use of accessories from other manufacturers without the express approval of CEM Technology.
• Deliberate or irresponsible behavior on scaffolding, when using ladders, when measuring near machines which
are running, or near parts of machines or installations which are unprotected
• Aiming directly into the sun
• Inadequate safeguards at the surveying site (e.g. when measuring on roads, construction sites, etc.)
1.Safety Instruction
•
Permitted Use
Prohibited Use
Laser Distance Meter User Manual
4
Laser Classification
There is a visible laser beam which emerges from the front of the instrument.
Do not stare into the laser beam or direct it towards other people unnecessarily. Eye‘s protection is normally
afforded by aversion responses including the blink reflex.
Looking directly into the beam with optical aids (e.g. binoculars, telescopes) can be hazardous.
Do not look directly into the beam with optical aids.
Looking into the laser beam may be hazardous to the eyes.
Do not look into the laser beam. Make sure the laser is aimed above or below eye level.
Laser Class 2 products:
:
Precautions:
Precautions:
WARNING
CAUTION:
Laser Distance Meter User Manual
5
1) Remove battery compartment lid.
2) Insert batteries, observing correct polarity.
3) Close the battery compartment again.
Replace the batteries when the symbol “ “ flashes permanently
in the display.
• Use alkaline batteries only.
• Remove the batteries before any long period of non-use to avoid
the danger of corrosion
•
2 Start-Up.
•
Inserting/Replacing Batteries (See “Figure A”)
Figure A
Laser Distance Meter User Manual
6
Keypad (See “Figure B”)
1- button
2- button
3- button
4- Button
ON/MEAS
CLR/OFF
MEM/Reference
Function( )/Unit
Laser Distance Meter User Manual
7
OFF
MEM Uint
Figure B
1
2
4
3
Laser Distance Meter User Manual
8
LCD Display (See “figure C”)
1- Laser active
2- Reference level (front)
3- Reference level (rear)
4- Battery status
5- Intermediate line 1
6- Intermediate line 2
7- Summary line
Figure C
1
2
3
4
5
6
7
Laser Distance Meter User Manual
9
Figure D
.3 Initial Operation and Setting
Switches on the instrument and laser.
Press this button longer to switch off the instrument.
The instrument switches off automatically after three minutes of inactivity.
The last action is cancelled or the data display is cleared. If in the
mode of History storage, press MEM button and Clear button simultaneously
will clear all storage data in the memory.
The default reference setting is from the rear of the
instrument. Long press this button to take the
selection from the front edge , A special beep
sounds whenever the reference setting is changed.
After a re-startup the reference returns automatically
to the default setting (rear reference).
Switching On and Off
Clear Button
Reference Level Setting (See “Figure D”)
OFF
MEM Uint
OFF
MEM Uint
OFF
OFF
MEM
Laser Distance Meter User Manual
10
Area
0.000 m²
0.000 ft²
0.000 ft²
0.000 ft²
0.000 ft²
1
2
3
4
5
Distance
0.000 m
0.0 in
0 1/16 in
0.000 ft
0’00” 1/ 61
Volume
0.000 m³
0.000 ft³
0.000 ft³
0.000 ft³
0.000 ft³
Click the button longer to change the next type of unit. The following unit can be set:
Distance Unit Setting For Instrument
Uint
Inhaltsverzeichnis
Andere CEM Messgerät Handbücher
CEM
CEM ORACLE Bedienungsanleitung
CEM
CEM DT-610B Bedienungsanleitung
CEM
CEM DT-337 Bedienungsanleitung
CEM
CEM 722-449 Bedienungsanleitung
CEM
CEM DT-25 Bedienungsanleitung
CEM
CEM DT-2G Bedienungsanleitung
CEM
CEM DT-3369T-BT Bedienungsanleitung
CEM
CEM DT-186 Bedienungsanleitung
CEM
CEM FC-35 Bedienungsanleitung
CEM
CEM DT-610B Bedienungsanleitung
CEM
CEM DT-9989 Bedienungsanleitung
CEM
CEM SMART 6 Bedienungsanleitung
CEM
CEM DT-326 Bedienungsanleitung
CEM
CEM CO-181 Bedienungsanleitung
CEM
CEM DT-9935 Bedienungsanleitung
CEM
CEM 9702 Bedienungsanleitung
CEM
CEM SMART System 5 Bedienungsanleitung
CEM
CEM DT-338 Bedienungsanleitung
CEM
CEM DT-9560 Bedienungsanleitung
CEM
CEM DT-360 Bedienungsanleitung
