Center 316 Bedienungsanleitung

HUMIDITY:

TEMP: 20 140 F

100%RH

60 C

HUMIDITY

TEMPERATURE

METER

CENTER Technology Corporation

316

TITLE PAGE

I. Introduction ....................................... 1

II. Specifications.................................... 1

III. Symbol Definition and Button

Location............................................. 3

IV. Operating Instructions.................... 4

4.1 Power-Up ....................................... 4

4.2 Selecting the Temperature Unit...... 4

4.3 Data-Hold Operation ...................... 4

4.4 Relative Operation.......................... 4

4.5 MAX/MIN Operation ....................... 4

4.6 Auto Power Off............................... 5

4.7 Low Battery Condition.................... 5

C O N T E N T S

Humidity Temperature

I. Introduction:

This instrument is a digital meter that measures

both humidity and temperature.

II. Specifications:

Display: Dual display

Measurement Range:

Humidity: 0%RH ~ 99%RH

Temperature: -20°C ~ 60°C

(-4°F ~ 140°F)

Wet Bulb Temperature Range:

-20°C~60°C

(-4°F ~ 140°F)

Dew Point Temperature Range:

-20°C~60°C

(-4°F ~ 140°F)

Accuracy: (at 23°C ± 5°C)

Range Accuracy

5% RH ~ 95% RH ±3% RH

-20°C ~ 60°C ±0.8°C

-4°F ~ -140°F ±1.6°F

Resolution: 0.1%RH , 0.1°C / 0.1°F

Response Time: (@ t90; in slowly moving air)

Humidity: 180 sec

Temperature: 10 sec

Operating Conditions: 0°C ~ 40°C; <80% RH

Storage Conditions: -10°C ~ 60°C; <70% RH

Altitude: Up to 2000 meters.

Sample Rate: 2.5 times per second

Battery: 9 V Battery,

NEDA 1604 or JIS 006P

or IEC6F22

Humidity Temperature

Battery Life: 85-hours continuous;

(with alkaline battery)

Dimension: 240x54x34 mm

9.5x2.1x1.3 inches

Weight: Approx.180g (6.4 oz.)

Accessories: Battery, instruction

manual

Humidity Temperature

III. Symbols and Buttons:

○

1Dust cover ○

5HOLD button

○

2LCD display ○

6DP/WB/Ambient

Temperature button

○

3ON/OFF button ○

7°C/°F select button

○

4MAX/MIN button ○

8Battery cover

HUMIDITY:

TEMP:

F1404F

0%RH100

20 C

OPEN

9V BAT

NEDA 1604 6F22 006P

TERY

Maximum

Indication

Minimum

Indication

Low batter

Indication

uto

owe

Indication

Readin

Indication

Data Hold

Indication

Unit

Indication

Unit

Indication

Readin

Indication

Dew point & Wet bulb

temperature Indication

Humidity Temperature

IV. Operation Instructions:

4.1 Power-Up:

Press the ○

Ikey to turn the

Humidity/Temperature meter ON or OFF.

4.2 Selecting Temperature Units:

When the meter is first powered on, the default

scale setting is set to the Celsius (°C ) scale. To

change to Fahrenheit (°F) press the ”C/°F” button.

Press again to revert to Celsius. The next time the

meter is turned on, the scale setting will be the

same as it was when you powered off last time.

4.3 Data-Hold Operation:

The present reading may be held on the display

by pressing the “HOLD” button. When the held

data is no longer needed, release the data-hold

operation by pressing the “HOLD” button again.

When the meter is in the Data Hold mode, the

“REL”, “MAX/MIN”, and “°C/°F” buttons are

disabled.

4.4 DP/WB/Ambient Temperature Operation:

The Meter displays ambient temperature when

first turned on. To display dew point(DP)

temperature , press WB/DP once . Press DP/WB

again to switch to wet bulb (WB) temperature.

Pressing DP/WB a third time returns the Meter to

ambient temperature. The display indicates when

dew point and wet bulb temperature are selected.

4.5 MAX/MIN Operation:

Pressing the “MAX/MIN” button places the meter in

the MAX/MIN mode. Under this mode the maximum

value and minimum value is kept in the memory

simultaneously and updated with every new data

reading.

Pressing the MAX/MIN button will display the MAX

indicator and the Maximum value on the display.

Pressing MAX/MIN again will display the MIN

indicator and the Minimum value on the display.

Humidity Temperature

Pressing MAX/MIN again causes the MAX and MIN

indicators to blink together. This means that these

data have been updated in the memory and the

reading is the present temperature and humidity.

When the meter is in the MAX/MIN mode, the

“°C/°F” buttons are disabled. To exit the MAX/MIN

mode, one may press and hold MAX/MIN for two

seconds.

4.6 Auto Power Off:

By default, when the meter is powered on, it is in

the auto power off mode. The meter will power

itself off after 30 minutes if no key operation is

performed. To disable the auto power off feature,

press and hold the HOLD button and then power

on the meter, The auto power off symbol will

disappear to indicate that auto power off is

disabled.

4.7 Low Battery Condition:

When the battery voltage is under proper

operation requirement, the symbol will show

on the LCD and the battery needs to be replaced

with new one.

Optional Accessories:

33%RH Humidity standard

75%RH Humidity standard

CENTER TECHNOLOGY CORP.

4 / F NO. 415, Jung-Jeng Rd., 238 Shu-Lin, Taipei, Taiwan

E-Mail : [email protected]

http : / / www.centertek.com GCA000316-02000

Distributor in Australia

Pacific Sensor Technologies Pty Ltd

Unit 4, 3 Neutron Place Rowville, VIC 3178 Australia

1300 662 720 | [email protected]

www.pacificsensortech.com.au

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Center Messgerät Handbücher

Center

Center 327 Bedienungsanleitung

Center

Center 232 Bedienungsanleitung

Center

Center 221 Bedienungsanleitung

Center

Center 390 Bedienungsanleitung

Center

Center 531 Bedienungsanleitung

Center

Center 392 Bedienungsanleitung

Center

Center 262 Bedienungsanleitung

Center

Center 32 Bedienungsanleitung

Center

Center SE-323 Bedienungsanleitung

Center

Center 251 Bedienungsanleitung

Center

Center 530 Bedienungsanleitung

Center

Center C322 Bedienungsanleitung

Center

Center 532 Bedienungsanleitung

Center

Center C315 Bedienungsanleitung

Center

Center 222 Bedienungsanleitung

Center

Center C325 Bedienungsanleitung

Center

Center 340 Bedienungsanleitung

Center

Center 321 Bedienungsanleitung

Center

Center 212 Bedienungsanleitung

Center

Center 201 Bedienungsanleitung

Center

Center C317 Bedienungsanleitung

Center

Center 323 Bedienungsanleitung

Center

Center 510 Bedienungsanleitung

Center

Center 342 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung