Challenger Optics CO-OPM-96 Bedienungsanleitung

ChallengerOptics.com

Wavelength Specic Optical Testing and Measurement Equipment

CO-OPM-96 / Interactive Operating Manual

Best viewed with Adobe Acrobat Reader

2.1 Operating Keys 4

2.3.1 Scan Set 111.1 Special Features 2

2.3.6 Data Format 15

2.2 Key Function 5

1.2 Specications 2

2.2.5 Graph 8

2.3.7 System Info 15

2.2.1 Power ON / OFF 5

2.3.2 Oset 12

1.3 Accessories 3

2.2.6 Save 8

2.3.8 Scan Display 16

2.2.2 Mode 6

2.3.3 Auto Power O 13

2.2.7 Recall 9

2.3.9 PM Mode 17

2.2.3 dB / dBm 7

2.3.4 Time Set 13

1.4 Charge Method 3

2.3.10 Scan Mode 18

2.3.12 Display Unit 20

2.2.4 Scan 7

2.3.5 Data Delete 14

1.5 Meter Care 3

2.3.11 Threshold 19

2.3.13 Graph Unit 21

2.3.14 Below Threshold 21

2.4 Battery Replacement 22

Wavelength Chart 23

2. Getting Started 4

2.3 Menu 101. Introduction 2

011018

ChallengerOptics.com

Wavelength Specic Optical Testing and Measurement Equipment

back to Contents

CO-OPM-96 p 2

1. Introduction

1.1 Special Features

- Automatic Wavelength specic

Power measurement

- Compact and lightweight for eld use

- Easy one hand operation

- Data Storage capabilities

- Auto shut o

- Fast power up and Test

- High-quality graphics

1.2 Specications

Channels 96 - DWDM

Frequency / Wavelength 196.45 ~ 191.70 THz

(1526.05~1563.86 nm)

Channel Spacing 50, 100 and 200 GHz

Measurement Speed 4 sec (all channels)

Measurement Range +10 dBm ~ -40 dBm

Measurement Accuracy ±1.0 @ -40 dBm

Power Resolution 0.01 dB

Optical Connector SC / APC

Display Unit dB, dBm, nm, THz

Display 3.5” TFT-LCD, 16 bit Color

Battery / Power Rechargeable Lithium-Polymer – 10 hr

Operating Temperature -4° ~ +130° F (-20° ~ +55° C )

Weight 33 oz*

Dimensions h / w / d 8.75 x 4.25 x 2.5 (inches)* *w/boot

ChallengerOptics.com

Wavelength Specic Optical Testing and Measurement Equipment

CO-OPM-96 p 3

back to Contents

1.3 Accessories

Description Quantity

Body 1 ea

Rubber Boot 1 ea

USB Data cable 1 ea

Charger 1 ea

USB Drive (User’s Manual) 1 ea

1.4 Charge Method

The CO-OPM-96 has a rechargeable battery. A USB power adapter and micro USB

cable are provided for charging. Typical charge time is six hours.

Charging conditions:

LED Color Action of LED Conditions for battery charge

Red ON Charging

Green ON Fully charged

1.5 Meter Care

Do not subject the CO-OPM-96 to strong impact.

The CO-OPM-96 is not water resistant or waterproof

Do not disassemble.

Always properly clean the ber interfaces before taking a measurement.

Always replace the Dust Cap for dust protection.

ChallengerOptics.com

Wavelength Specic Optical Testing and Measurement Equipment

back to Contents

CO-OPM-96 p 4

2. Getting Started

2.1 Explanation of Operating Keys

Key Function

Backlight Power and backlight On/O

Menu Access system Menu and settings

Mode Options : ‘Auto’ and ‘Manual’

dB/dBm Toggle between dB and dBm UOM

SCAN All wavelengths are scanned and power levels are displayed

Graph Power levels of selected channels displayed as a graph.

Save Save measurements

Recall Recall saved measurements

ESC Cancel or move back to previous menu

OK Enter

◄ ► ▲ ▼ Left, right, up and down arrow key

0 ~ 9 Number and letters key

Del Delete key

+/- Sign key

ChallengerOptics.com

Wavelength Specic Optical Testing and Measurement Equipment

back to Contents

CO-OPM-96 p 5

2.2 Key Function

2.2.1 Power ON / OFF

To turn on and o.

Press the button more than 2 seconds, the logo shown below

appears and it moves to ‘Power Meter’page.

Press the button more than 2 seconds to turn the power o.

Backlight

ChallengerOptics.com

Wavelength Specic Optical Testing and Measurement Equipment

back to Contents

CO-OPM-96 p 6

2.2.2 Mode

Power Measurement has 2 options‘Auto’ and ‘Manual’.

If you select ‘Auto’, the instrument automatically scans the optical input and

displays the wavelength which has been detected with the highest level of power.

If you select ‘Manual’, the power of the wavelength selected by the user is

displayed in real time.

You can select the dierent wavelengths using ◄ ► ▲ ▼.

Selection of Manual and Auto can be done by this button

‘PM Mode’ or Click button.

Mode

ChallengerOptics.com

Wavelength Specic Optical Testing and Measurement Equipment

back to Contents

CO-OPM-96 p 7

2.2.3 dB / dBm

The button toggles between dB and dBm UOM.

2.2.4 Scan

Press the button, to measure all selected wavelengths and display in table format.

You can select the page using ◄ ► ▲ ▼.

dB/dBm

ChallengerOptics.com

Wavelength Specic Optical Testing and Measurement Equipment

back to Contents

CO-OPM-96 p 8

2.2.5 Graph

Press the button after scanning, to display power measurements in graph

format.

2.2.6 Save

Press the button, the measurement will be saved using the current date and

time as the le name. Or, a 17 character lename can be entered using the keypad.

Press the button to save.

If you want to cancel saving, press button.

Graph

Save

ESC

ChallengerOptics.com

Wavelength Specic Optical Testing and Measurement Equipment

back to Contents

CO-OPM-96 p 9

2.2.7 Recall

Press the button, to view les saved on device.

Use ▲, ▼ to highlight desired le.

Press the button to select the le to be displayed.

Recall

ChallengerOptics.com

Wavelength Specic Optical Testing and Measurement Equipment

back to Contents

CO-OPM-96 p 10

2.3 MENU

The button, allows you to congure the operating

environment of ‘CO-OPM-CW12’.

The menu consists of:

Scan Set

Oset

Auto Power O

Time Set

Data Delete

Data Format

System Info

Scan Display

PM Mode

SCAN Mode

Threshold

Display unit

Below Threshold

Inhaltsverzeichnis

Andere Challenger Optics Messgerät Handbücher

Challenger Optics

Challenger Optics CO-OPM-18 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OPM-MPO24 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OPM-48 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OPM-CW12 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OPM-PON Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OPM-48 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OPM-96 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OLS-MPO12 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OPM-96 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OLS-6100 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OPM-10 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OPM-18 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OPM-10 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OLS-MPO12 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OPM-48 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OLS-MPO12U Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OLS-MPO12U Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OLS-MP012 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OPM-PON Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OPM-MPO12 Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OTDR-CWDM-10M Series Bedienungsanleitung

Challenger Optics

Challenger Optics CO-OTDR-DWDM Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung