Chamberlain SECURITY+ WPB3LM3 Bedienungsanleitung

Carton Inventory

Overview

The Wireless 3-Button Control Station is designed to

be used only with the Wireless 3-Button Radio

Receiver (not provided).

Control Station

Model WPB3LM3

Wireless 3-Button Control Station

Bolt (4)

Washer (4)

Nut (4)

Screw (4)

Allen Wrench

Assembly

Install 4 AA Alkaline batteries (not provided). (Lithium

batteries recommended for colder environments.)

Learn

Button

Dipswitch

Block

Your WPB3LM3 can also be programmed to operate

as a 3-button wireless control station: The green

button will open the door, the white button will close

the door and the red button will stop the door's

movement. This feature may be setup as follows:

1. To enter programming press the RADIO button on

the logic board (the RADIO LED will light).

2. To program the OPEN button to the WPB3LM3

press OPEN on the logic board. The RADIO LED

will flash and then stay on. Press the green button

on the WPB3LM3 and the RADIO LED on the logic

board should flash. The WPB3LM3 should now be

programmed. (By programming the WPB3LM3 you

use 1 channel of the 23 channels on the radio

receiver.)

3. To program the CLOSE button to the WPB3LM3

press CLOSE on the logic board. The RADIO LED

will flash and then stay on. Press the white button

on the WPB3LM3 and the RADIO LED on the logic

board should flash. The WPB3LM3 should now be

programmed. (By programming the WPB3LM3 you

use 1 channel of the 23 channels on the radio

receiver.)

4. To program the STOP button to the WPB3LM3

press STOP on the logic board. The RADIO LED

will flash and then stay on. Press the red button on

the WPB3LM3 and the RADIO LED on the logic

board should flash. The WPB3LM3 should now be

programmed. (By programming the WPB3LM3 you

use 1 channel of the 23 channels on the radio

receiver.)

5. After programming the WPB3LM3 press the

RADIO button on the logic board (LED will turn off).

NOTE: If there is no activity within 30 seconds the

radio will automatically exit programming mode.

Programming WPB3LM3 to a

Commercial Logic 3 Operator

Operation

Clear Memory of Receiver: When the Receiver has

power, press the Learn button until the LED blinks a

total of 6 times.

Mount Control Station

Step 1

Choose mounting location for Control Station. Remove

the back panel and attach it to a solid surface or post.

Mount the Control Station onto the back panel with

screws. Tighten screws with Allen wrench.

Step 2

It is recommended that the Control Station be

mounted to a Gooseneck post or non-metallic

surface.

Refer to Receiver manual for mounting instructions.

NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited,

except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.

Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER:

1-800-528-2806

www.liftmaster.com

The Chamberlain Group, Inc. warrants to the first retail purchaser of this product that it is free from defect in materials and/or workmanship for a period

of 1 year from the date of purchase.

One Year Limited Warranty

Andere Chamberlain Controller Handbücher

Chamberlain

Chamberlain Security+ 974CB Bedienungsanleitung

Chamberlain

Chamberlain Garos CS 300 Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung

Chamberlain

Chamberlain myQ 821LM Bedienungsanleitung

Chamberlain

Chamberlain CLDM1ANZ Bedienungsanleitung

Chamberlain

Chamberlain Motorlift GWUP180 Bedienungsanleitung

Chamberlain

Chamberlain 395LM Bedienungsanleitung

Chamberlain

Chamberlain 041DJ002 Bedienungsanleitung

Chamberlain

Chamberlain CAP2D Bedienungsanleitung

Chamberlain

Chamberlain 772CB Bedienungsanleitung

Chamberlain

Chamberlain Liftmaster PROFESSIONAL 412-315HM Bedienungsanleitung

Chamberlain

Chamberlain 872 Series Bedienungsanleitung

Chamberlain

Chamberlain 874 Series Bedienungsanleitung

Chamberlain

Chamberlain 811LM Bedienungsanleitung

Chamberlain

Chamberlain 41A6127 Bedienungsanleitung

Chamberlain

Chamberlain SUB324M Bedienungsanleitung

Chamberlain

Chamberlain LiftMaster Professional 915LM Bedienungsanleitung

Chamberlain

Chamberlain CLLACD Bedienungsanleitung

Chamberlain

Chamberlain LA500UL Kurzanleitung

Chamberlain

Chamberlain 320LM Bedienungsanleitung

Chamberlain

Chamberlain CAP2D Bedienungsanleitung

Chamberlain

Chamberlain LA412UL Kurzanleitung

Chamberlain

Chamberlain Dial Code Bedienungsanleitung

Chamberlain

Chamberlain LA400UL Kurzanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung