Chauvet DJ DMX-4 Bedienungsanleitung

Quick Reference Guide

EN DMX-4 QRG

About This

Guide The DMX-4 Quick Reference Guide (QRG) has basic

product information

such as mounting, menu options, and DMX values. Download the

User

Manual fromfor more details.

Disclaimer

The information and specifications contained in this QRG are subject to

change without notice.

Safety Notes These Safety Notes include important information about

installation, use,

and maintenance.

•This product is not intended for permanent installation.

•ONLY connect this product to a grounded and protected circuit.

•Always disconnect from power before cleaning or replacing the fuse.

•DO NOT look at the light source when the product is on.

•Make sure the power cord is not crimped or damaged.

•Never disconnect this product from power by pulling on the cord.

•When mounting this product overhead, use a safety cable.

•DO NOT allow flammable materials close to the unit while operating.

•The voltage of the outlet to which you are connecting this product must be

within the range stated on the decal or rear panel of the product.

•This product is for indoor use only! (IP20) To prevent risk of fire or shock,

do not expose this product to rain or moisture.

•Always mount this product in a location with adequate ventilation, at least

20 in (50 cm) from adjacent surfaces.

•Be sure that no ventilation slots on the unit’s housing are blocked.

•Never connect this product to a dimmer or rheostat.

•Replace the fuse with one of the same type and rating.

•ONLY use the hanging/mounting bracket to carry this product.

•The maximum ambient temperature is 104° F (40° C). Do not operate this

product at higher temperatures.

•In the event of a serious operating problem, stop using immediately.

•DO NOT open this product. It contains no user-serviceable parts.

•To eliminate unnecessary wear and improve its lifespan, during periods of

non-use completely disconnect the product from power via breaker or by

unplugging it.

Contact

Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact

your distributor to request suppo

return a

product

Visit

for contact information.

DMX-4 QRG EN

What Is

Included •DMX-4

•Power Cord •Warranty Card

•Quick Reference Guide

To Begin Unpack your DMX-4

and make sure you have received all parts in good

condition. If the box or contents appear damaged, notify the carrier

immediately, not Chauvet.

Description The DMX-4 is a 4-

channel dimmer/switch pack optimized for use with LED

products.

Each channel can be individually set as a dimmer or a switch. Four

duplex outlets can control

up to 8 products simultaneously. Automated

programs have adjustable speeds and dimmer levels,

which offer great

control without DMX.

Overview

Power In

LED

Channel

Indicators

Fuse holders

(1-4)

Channel

Outputs

(1-4)

DMX Out

DMX In

LED

Display

Control

Buttons

Power

Switch

EN DMX-4 QRG

AC Power This product has an auto-

ranging power supply that can work with an input

voltage range of 100–240 VAC, 50/60 Hz.

Fuse

Replacement This product is equipped with replaceable fuses. Each section has its

own 7 A fuse that runs through the 20 A main power supply.

Disconnect the product from power.1. With a #2 Phillips-head screwdriver, unscrew the fuse holder cap2. from the housing.

Remove the blown fuse.3. Replace with a fuse of the same type and rating.4. Screw the fuse holder cap back in place and reconnect power.5.

Dimmer/Switch

Operation Dimmer/switch packs are primarily intended for lamp-based PAR cans.

Connecting a fixture equipped with an electronic (switching) power

supply to a dimmer/switch pack may damage the fixture or make it work

erratically.

The improved DMX-4’s design now allows you to switch on and off loads

equipped with electronic power supplies, such as LED-based luminaries

or laser fixtures. However, the DMX-4 must be in Switch mode before

connecting loads of this type to it. Please see the instructions on how to

set the DMX-4 in Switch mode below.

Always make sure that the DMX-4 is in Switch mode before

connecting a load equipped with an electronic power supply to it.

Doing otherwise could damage the load.

The DMX-4 is optimized to also operate with LED-based products.

Dimmer or

Switch Mode The DMX-4 has two different methods for controlling the output of the four

channels. To set this via the control panel, do the following.

Unplug any units from the four output channels.1.

Connect the DMX-4 to a suitable power outlet.2. Turn the product on.3. Press <MODE> repeatedly until A001–A512 appears on the display.4. Press <MENU> repeatedly until S1__, S2__, S3__, or S4__ appears on5. the display. This setting can be set differently for each of the four

channels. Navigate to the desired channel.

Use <p>or <q>to select either __oN (Switch mode) or __oF (Dimmer6. mode) for the channel selected in the previous step.

Repeat steps 5 and 6 to set each of the other channels, if necessary.7.

DMX-4 QRG EN

Mounting Before mounting this product, read the Safety Notes.

Mounting

Diagram

Mounting Clamp

Mounting

Bracket

Safety

Cable

EN DMX-4 QRG

Alternate

Rigging If

you are using this product with truss or a lighting stand, there is an

alternate rigging configuration available. This option is ideal for hanging the

product without using a mounting clamp.

Unplug the product from power.1. On the back of the product, locate the six Phillips-head screws.2. Use a Phillips-head screwdriver to remove these screws.3. The mounting bracket will now come off. Be careful not to damage4. the internal components of the dimmer, as they are exposed during

this step!

Flip the mounting bracket (back panel) around.5. Reattach the panel by securely reinstalling the six Phillips-head6. screws

Mounting

Diagram

(Alternate

Configuration)

Remove these

six screws

Alternate Rigging

Configuration

Back Panel

DMX-4 QRG EN

Control Panel

Description Button Function

<MODE> Selects an operation mode or backs out of the current menu

option

<MENU> Selects a menu option

<p>(UP) Scrolls up the list of options or selects a higher value

<q>(DOWN) Scrolls down the list of options or selects a lower value

Menu Options

Mode Menu Display Description

DMX Mode

Starting Address A001–A512 Selects the DMX starting address

Personality

CH:01 1-Channel mode

CH:02 2-Channel mode

CH:04 4-Channel mode

Switch/Dimmer

Switch: oN

Dimmer: oF

S1__ Channel 1 function

S2__ Channel 2 function

S3__ Channel 3 function

S4__ Channel 4 function

Power Toggle SO00–SO30 Turns power on/off as a DMX signal is

detected. Can assign up to a 30 second

delay.

Standalone

Mode

Program P:01–P:16 Automatic programs

Run Speed SP:01–SP:99 Automatic program speeds

Slow to fast

Dimmer d000–d100 0–100%

DMX Linking The DMX-4 can work with a DMX controller when linked by DMX serial

connections.

Instructions for connecting and configuring this product for

DMX operation are in the User Manual.

If you are not familiar with DMX,

download the DMX Primer from.

Starting

Address

To ensure full access to all channels in each DMX mode, the highest

recommended DMX address is 509.

EN DMX-4 QRG

DMX Values

4-Channel Channel Function Value Setting

1 Dimmer 000 ó255 0–100%

2 Dimmer 000 ó255 0–100%

3 Dimmer 000 ó255 0–100%

4 Dimmer 000 ó255 0–100%

2-Channel Channel Function Value Setting

1 Dimmer 000 ó255 Channels 1 + 2, 0–100%

2 Dimmer 000 ó255 Channels 3 + 4, 0–100%

1-Channel Channel Function Value Setting

1 Dimmer 000 ó255 All four channels, 0–100%

DMX-4 QRG ES

Acerca de esta

guía La Guía de referencia rápida (GRR) del DMX-4

contiene información básica sobre el

producto, como montaje, opciones de menú y valores DMX. Descargue el manual de

usuario de para una información más detallada.

Exención de

responsabilidad

La información y especificaciones contenidas en esta GRR están sujetas a cambio sin

previo aviso.

Notas de

seguridad

Estas notas de seguridad incluyen información importante sobre el montaje, uso y

mantenimiento.

•Este producto no está concebido para una instalación permanente.

•Conecte este producto SOLO a un circuito con toma de tierra y protegido.

•Desconecte siempre de la alimentación antes de la limpieza o sustitución del

fusible.

•NO mire a la fuente de luz cuando el producto esté encendido.

•Asegúrese de que el cable de alimentación no está retorcido ni estropeado.

•Nunca desconecte este producto de la alimentación tirando del cable.

•Cuando monte este producto en alto, use un cable de seguridad.

•NO permita la presencia de materiales inflamables cerca de la unidad cuando esté

en funcionamiento.

•NO toque este producto cuando esté en funcionamiento, pues podría estar

caliente.

•La tensión del enchufe al que conecte este producto ha de estar en el rango

establecido en el grabado o en el panel posterior del producto.

•¡Este producto es para uso en interiores solamente! (IP20) Para evitar riesgos de

incendio o descarga, no exponga este producto a la lluvia o la humedad.

•Monte siempre este producto en una ubicación con ventilación adecuada, al

menos a 20 in (50 cm) de superficies adyacentes.

•Asegúrese de que ninguna ranura de ventilación en la carcasa de la unidad queda

bloqueada.

•Nunca conecte este producto a un atenuador o reostato.

•Sustituya el fusible con uno del mismo tipo y categoría.

•Use SOLAMENTE los soportes de colgar/montar o las asas para mover este

producto.

•La temperatura ambiente máxima es de 104 °F (40 °C). No haga funcionar este

producto a temperaturas más altas.

•En caso de un problema grave de funcionamiento, deje de usarlo inmediatamente.

•NO abra este producto. No contiene piezas reparables por el usuario.

•Para evitar un desgaste innecesario y alargar su vida útil, desconecte

completamente el producto mediante el interruptor o desenchufándolo durante

periodos en que no se use.

Contacto

Fuera de EE. UU., Reino Unido, Irlanda, México o Benelux póngase en contacto con

su distribuidor para solicitar asistencia o devolver un producto.

Visite

para información de contacto.

ES DMX-4 GRR

Qué va

incluido •DMX-4

•Cable de alimentación •Tarjeta de garantía

•Guía de referencia rápida

Para empezar

Desembale su DMX-

4 y asegúrese de que ha recibido todas las partes en

buen estado. Si la caja o los componentes parecen dañados, notifíqueselo

inmediatamente al transportista, no a Chauvet.

Descripción El DMX-

4 es un paquete de atenuador/conmutador para usar con productos

LED. Cada canal se puede configurar individualmente como atenuador o

como conmutador. Cuatro salidas dobles pueden controlar

hasta 8 productos

simultáneamente. Los programas automáticos tienen velocidades regulables y

niveles de atenuación, lo que proporciona un gran control sin DMX.

Vista general

Entrada de

alimentación

Indicadores

Canal LED

Portafusibles

(1-4)

Salida DMX

Entrada

DMX

Pantalla

LED

Botones

control

Interruptor

alimentación

Andere Handbücher für DMX-4

Inhaltsverzeichnis

Sprachen:

Andere Chauvet DJ DJ-Equipment Handbücher

Chauvet DJ

Chauvet DJ GigBAR IRC Bedienungsanleitung

Chauvet DJ

Chauvet DJ INTIMIDATOR SPOT 360X IP Bedienungsanleitung

Chauvet DJ

Chauvet DJ Pinspot Bar Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR T12 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ SWARM 4FX Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR Q12 BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator Scan 360 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom Wedge Quad Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZLink Par Q1BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ B-250 Bedienungsanleitung

Chauvet DJ

Chauvet DJ MotionOrb Bedienungsanleitung

Chauvet DJ

Chauvet DJ Cosmos HP Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator Beam Q60 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom Gobo IP Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR Q12BT Bedienungsanleitung

Chauvet DJ

Chauvet DJ Colorband Pix Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom H1 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom H1 Bedienungsanleitung

Chauvet DJ

Chauvet DJ SHOCKER PANEL 180 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Green Thinking LFS-5D Bedienungsanleitung

Chauvet DJ

Chauvet DJ Kinta HP Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR PRO W USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ Hurricane Bubble Haze LT Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR USB Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung